검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

SRTD-1-SRTD-2

시멘트 부착 폴리이미드 고속 응답 RTD 표면 센서

재고가 있는 모델
  • 36 in 리드 기본형
  • 표면 온도 측정에 적합
  • 와이어 권선 100 Ω Pt RTD 소자
  • 밀리초 단위 응답 시간
SRTD-1-SRTD-2
시작 870,507 원
재고가 있는 모델
시멘트 부착 폴리이미드 고속 응답 RTD 표면 센서 SRTD-1-SRTD-2 SRTD-1-SRTD-2
loading all models
제품 개요
  • 곡선 반경, 최소 9.5mm
  • 케이블 직경 0.06 in
  • 전기 연결 리드 제거
  • 단열 PFA
  • 절연 저항 50 MΩ
  • 절연 저항 노트 50 Vdc 리본 케이블에서 최소 50 MΩ. 500 Vdc 원형 연선 케이블에서 최소 100GΩ(상온 건조 조건).
  • 장착 DIN 백금
  • 명목상 저항 100 Ω
  • 공정 온도, 최대 260 °C
  • 최소 공정 온도 -200 °C
  • 응답 시간 <200 ms
  • 응답 시간 사양 참고 금속 표면에서 지연 시간 <200 ms
  • 자기 가열 효과 0.33 °C / mW
  • 센서 높이 0.64 mm
  • 센서 길이 25 mm
  • 센서 폭 15.7 mm
  • 시리즈 ID SRTD-1-SRTD-2
  • 안정성 <0.2°C
  • 안정성 사양 참고 <0.2 °C 연간 드리프트, 정격 서비스 및 적절한 장착 시
  • 온도 계수 0.00385Ω/Ω/ °C
  • 온도 계수 사양 참고 α = 0.00385 Ω/Ω/°C
  • 온도 센서 유형 RTD

Supported Applications

The Omega SRTD-1 and SRTD-2 series are polyimide insulated surface mount RTD temperature sensors designed for measuring surface temperature. These small, flexible sensors feature low mass to minimize thermal effect on the material being measured. They are intended for applications where the sensor can be mounted directly to a surface using adhesives or mechanical mounting methods.

Operating Conditions & Performance

The series utilizes 100 ohm wire wound platinum sensing elements with an alpha coefficient of 0.00385 ohm/ohm/°C (DIN 43760). The continuous operating temperature range is -320°F (-200°C) to 500°F (260°C), with a short-term limit up to 550°F (288°C) for less than 1500 hours. Stability is rated at <0.2°C drift per year at the rated service temperature with proper mounting.

Performance characteristics include:

  • SRTD-1 Accuracy: ±0.50 ohms, ±0.50% of temperature
  • SRTD-2 Accuracy: ±0.22 ohms, ±0.25% of temperature reading
  • Response Time: 70 ms to reach 63.2% of a step change in water flowing at 3 ft/sec transverse to the sensor (ASTM-E-644); <200 milliseconds lag on metal surfaces.
  • Self-Heating Effect: The bare sensor will rise less than 1°C while dissipating an I2R power of 3 milliwatts in still air (ASTM-E-644).
  • Insulation Resistance: Minimum 50 megohms with 50 volts dc applied to a dry sensor at room temperature; minimum 100G Ohm at 500 Vdc for round twisted cable in dry conditions.

Configuration Options

The series is configured as "Cement-On" sensors with polyimide insulation. Standard construction includes a sensor head measuring 1.00 inch (length) x 0.62 inch (height). The electrical connection uses a 3-wire configuration.

Lead Wire and Cabling

Sensors are available with standard lead lengths of 36 inches, or extended options including 48, 60, 72, and 120 inches. The standard cable is a #26 AWG stranded nickel-plated copper ribbon cable (PFA insulated). An alternative round twisted cable option provides higher insulation resistance ratings.

Mounting and Installation

The sensors are designed for installation using OMEGABOND® Epoxy Adhesives (#100, #101, or #200) or other mechanical methods. Minimum bend radius requirements are 3/8" transverse to the element winding and 1-1/2" longitudinal to the winding.

Optional Accessories

An MTP-U-M heavy-duty connector is available as a popular option for electrical termination.

Key Product Differences

The primary distinction between models lies in resistance tolerance and accuracy class:

  • SRTD-1 Series: Offers 100 +/- 0.5Ω at 0°C, or +/- 0.5% of reading up to 232°C.
  • SRTD-2 Series: Provides tighter tolerance with 100 +/- 0.22Ω at 0°C, or +/- 0.25% of reading up to 232°C.

Variants are further differentiated by lead length suffixes (e.g., SRTD-1-60 INCH). The SRTD-2-72 INCH model is noted for having a black/black/red cable configuration. Other sizes beyond the standard 36-inch leads are available upon request.

ko-KR
ko_KR
설정 저장