검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

FL86-Series

전 플라스틱 가변 면적 유량계

옵션 제공:
  • NIST 교정 가능
  • 설치 및 유지보수를 간소화하는 유니언 엔드
  • 화학물질 및 파손에 강한 계량 튜브
  • 투명 분리형 직독 눈금 (GPM 수량)
FL86-Series
시작 1,005,617 원
전 플라스틱 가변 면적 유량계 FL86-Series FL86-Series
loading all models
제품 개요
  • 재료 폴리설폰
  • 접액부 재질 FKM, 폴리설폰, PTFE, PVDF
  • 미디어 호환성 정제 공정 / 냉각수
  • 프로세스 연결 유형 NPT 암나사
  • 공정 온도, 최대 71 °C
  • 규모 직접 읽기
  • 스케일 길이 127 mm
  • 스케일 미디어 보정 물
  • 시리즈 ID FL86-Series
  • 밸브 포함 false

Supported Applications

The Omega FL-86 Series consists of all-plastic variable area flow meters designed for vertical in-line installation with the inlet at the bottom and outlet at the top. These units are engineered to measure water flow rates ranging from 0.1 to 1 GPM up to 10 to 100 GPM, utilizing a chemical- and break-resistant metering tube.

Applications include systems requiring resistance to corrosive fluids where metal components are unsuitable. The series supports media compatibility with water using PTFE floats and offers optional Perfluoroelastomer O-rings for enhanced chemical resistance. Users must ensure fluid compatibility, as the meters are not oxygen cleaned; incompatible fluids may cause O-ring swelling or failure.

Operating Conditions & Performance

The FL-86 Series delivers an accuracy of ±6% full scale and repeatability of ±1%. Measurement ranges span from 0.1 to 1 GPM water through 10 to 100 GPM water, depending on the specific model selected.

Operating limits are defined by a pressure/temperature curve for meters with plastic fittings: at 20°F, the maximum non-shock pressure is 150 psig; this decreases as temperature rises, reaching 10 psig at 160°F. The series includes models configured for specific ranges such as 0.2 to 2.4 GPM water and 6 to 60 GPM water.

Caution is required regarding environmental exposure: Polysulfone components should not be used in direct sunlight or significant sources of ultraviolet light, which can degrade the material integrity.

Configuration Options

  • Housing and Wetted Materials: The metering tube and guide rod are constructed from Polysulfone. Fittings utilize PVDF, while floats are made of PTFE. Standard O-rings are FKM, with Perfluoroelastomer available as an option.
  • Process Connections: Models feature union ends for simplified installation and maintenance in vertical piping systems. Connection sizes include 1/2 FNPT, 3/4 FNPT, 1 FNPT, and 2 FNPT depending on the flow range model.
  • Dimensions: Overall length (Dimension A) varies by size: 254 mm (10 in), 305 mm (12 in), or 406 mm (16 in). Dimension B ranges from 35 mm (1.4 in) to 98 mm (3.9 in).
  • Calibration: NIST calibration is available as an option, with certificates for 5-point (-NIST 5PT) or 10-point (-NIST 10PT) verification.

Key Product Differences

The series comprises seven distinct models (FL-86A through FL-86J), differentiated by flow range, connection size, and physical dimensions. The selection logic is driven by the required GPM water capacity:

  • Low Flow Models: FL-86A covers 0.1 to 1 GPM with a 1/2 FNPT connection; FL-86B (0.2 to 2.4 GPM) and FL-86C (0.5 to 5 GPM) utilize 3/4 FNPT connections.
  • Mid Flow Models: FL-86D (1 to 10 GPM) and FL-86E (2 to 20 GPM) are equipped with 1 FNPT connections and a length of 305 mm (12 in).
  • High Flow Models: FL-86H (6 to 60 GPM) and FL-86J (10 to 100 GPM) require 2 FNPT connections and measure 406 mm (16 in) in length.

All models feature a see-through, detachable direct-reading scale calibrated for water flow. The series is backed by a one-year warranty against defects in materials and workmanship when installed per manufacturer instructions.

ko-KR
ko_KR
설정 저장