검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

FMG900-Series

조절식 삽입형 전자기 유량계

옵션 제공:
  • 내구성
  • 조절 가능한 깊이
  • 핫탭 가능
  • 황동 또는 산업용 등급 스테인리스강(예: 304/316 SS)
FMG900-Series
시작 3,550,031 원
조절식 삽입형 전자기 유량계 FMG900-Series FMG900-Series
loading all models
제품 개요
  • 정확도 ± 1%
  • 정확도 세부 사항 ± 1% 풀스케일
  • 승인 CE
  • 전도도 > 20 μS/cm
  • 빈 배관 감지 기본 설정은 0 흐름입니다
  • 미디어 호환성 전도성 액체, 부식성 화학물질 / 산성 / 염기, 소금물 / 염물
  • 출력 수 1
  • 최대 작동 압력 200 psi
  • 작동 온도, 최대 72 °C
  • 최소 작동 온도 -17 °C
  • 출력 세부 정보 정사각파 펄스, 광절연, 550 Hz @ 20 ft/초, 최대 6 mA, 30 Vdc 순방향 유량 표준 (역방향 유량 선택 가능)
  • 출력 신호 DC 펄스
  • 프로세스 연결 유형 NPT 수나사
  • 공정 온도, 최대 93 °C
  • 최소 공정 온도 0 °C
  • 시리즈 ID FMG900-Series
  • 공급 전력 참고 12~24 Vdc, 250 mA
  • 전원 유형 DC
  • 공급 전압 12 ~ 24 Vdc
  • 속도, 최대 20 ft/s
  • 속도, 최소 0.28 ft/s
  • 무게 0 lb

Supported Applications

The Omega FMG900 Series Adjustable Insertion Electromagnetic Flow Meter is designed for measuring flow in pipes ranging from 3" to 48", with an optional extension up to 72". The series operates by generating a voltage proportional to flow rate within a rapidly reversing magnetic field, featuring no moving parts suitable for dirty water and corrosive chemical conditions.

Documented applications include:

  • Water
  • Dirty water
  • Chemical injection or fertigation (with specific installation requirements)

Operating Conditions & Performance

The FMG900 Series is engineered for a flow velocity range of 0.28 to 20 ft/sec (0.08 - 6.09 m/sec). Calibration accuracy is specified as +/- 1% of full scale, with empty pipe detection handled via software that defaults to zero flow.

Operating limits are defined by the following parameters:

  • Ambient Temperature: 0° to 160° F (-17° to 72° C)
  • Process (Fluid) Temperature: 32° to 200° F (0° to 93° C)
  • Pressure Rating: 200 psi (13.8 bar)
  • Minimum Conductivity: 20 microSiemens/cm

The series is not designed for underwater operation; the -40 option is recommended if occasional immersion is possible.

Configuration Options

The FMG900 Series offers configurable wetted materials, insertion styles, and output options to accommodate specific process needs. The housing material is cast powder-coated aluminum with an enclosure rating of NEMA 4X (IP66).

Materials & Construction

  • Shaft/Fitting: 316 SS or Brass
  • Electrodes: Hastelloy®
  • Electrode Cap: PVDF
  • O-Ring (Valve Assembly): EPDM
  • Valve Assembly (115/215 Only): Bronze with bronze ball valve; stainless optional

Process Connections & Installation

  • Standard Units: 1-1/2" Male NPT (FMG901, FMG902, FMG903, FMG904)
  • Hot Tap Models: 2" Male NPT (FMG905, FMG906, FMG907, FMG908)

Outputs & Power

The sensor provides a square wave pulse output that is opto isolated at 550 Hz @ 20 ft/sec. The standard electrical load is 6 mA max, 30 Vdc for forward flow; reverse flow is an optional configuration.

  • Power Supply: 12-24 Vdc (Full Power: 250 mA; Low Power: 40 mA average with 250 mA peaks)
  • Transmitter Options: FTB700-T blind transmitter for 4 to 20 mA output
  • Pulse Outputs (with Transmitters): Scaled pulse, high/low alarm outputs, or sensor pass-through unscaled pulse

Accessories & Options

  • Reverse flow output (add 'RF' to model number)
  • Immersibility option (-40 suffix recommended for occasional immersion)
  • Hot-tap installation with isolation valve
  • FTB700-D: Remote rate and total display with 4 to 20 mA output
  • PSU-93: 24 Vdc power supply, 200 mA
  • TX4-100: 4 conductor hook-up wire, 30 m (100')

Key Product Differences

The series is divided into insertion style and hot tap configurations across two material families:

  • FMG901 & FMG902: Brass insertion style magmeter. FMG901 covers 3" to 10" pipe; FMG902 covers 10" to 48" pipe.
  • FMG903 & FMG904: Stainless steel (SS) insertion style magmeter. FMG903 covers 3" to 10" pipe; FMG904 covers 10" to 48" pipe.
  • FMG905 & FMG906: Brass hot tap insertion style magmeter. FMG905 covers 3" to 10" pipe; FMG906 covers 10" to 48" pipe.
  • FMG907 & FMG908: Stainless steel (SS) hot tap insertion style magmeter. FMG907 covers 3" to 10" pipe; FMG908 covers 10" to 48" pipe.

액세서리

accessories

DC POWER SUPPLIES
131,515원 / 개당
49 재고 있음

cables

Sensor and Transducer Wire and Multi-Conductor Cable
95,269원 / 개당
29 재고 있음

signal conditioners

Blind 4 to 20 mA transmitter
1,110,071원 / 개당
3 재고 있음
ko-KR
ko_KR
설정 저장