검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

HIGHTEMP-STND-CON-ACC

세라믹 및 3핀 온도 커넥터용 액세서리

재고가 있는 모델
  • 케이블 클램프
  • 패널 장착 브래킷
  • 튜브 클램프
  • 안전 클립
HIGHTEMP-STND-CON-ACC
시작 2,968 원
재고가 있는 모델
세라믹 및 3핀 온도 커넥터용 액세서리 HIGHTEMP-STND-CON-ACC HIGHTEMP-STND-CON-ACC
loading all models
제품 개요
  • 추가 기능 1 패널 장착 브래킷
  • 시리즈 ID HIGHTEMP-STND-CON-ACC

Supported Applications

The Omega Accessories for Ceramic and Three-Pin Temperature Connectors series provides mechanical support components designed specifically for use with ceramic and three-pin temperature connectors. These accessories facilitate the secure installation, cable management, and panel mounting of compatible connector families including NHX, UHX, NHXH, UHXH, NOX, UOX, OTP, NMP, MTP, SHX, and USHX.

Operating Conditions & Performance

This series consists of mechanical accessories rather than active sensing instruments; therefore, performance specifications such as accuracy class, response time, or measurement range are not applicable. The components function to maintain the physical integrity and positioning of temperature connectors within an installation environment.

Configuration Options

The series offers a configurable selection of mechanical hardware tailored to specific connector types. Available accessory categories include:

  • Cable Clamps: Models PCLM-NHX, PCLM, PCLM-NMP, and PCLM-MTP provide cable retention for NHX/UHX/NHXH/UHXH; NOX/UOX/OTP; NMP; and MTP connectors respectively.
  • Panel Mounting Brackets: Models HACL, XACL, SHACL, and MTACL enable panel installation. Bracket dimensions vary by connector compatibility: HACL (34.9 mm / 1⅛" spacing), XACL (34.9 mm / 1⅛" spacing), SHACL (27.8 mm / 1⅝" spacing), and MTACL (29.46 mm / 1.16" spacing). Screw sizes are specified as 6-32 for HACL, XACL, and SHACL, and 3-48 for MTACL.
  • Safety Clips: Model HTCL is available for NHX, UHX, NHXH, and UHXH connectors to provide additional security.
  • Tube Clamps: Models X-BRLK-(*)-NHX and X-BRLK-(*) are offered in various sizes (e.g., 1/4", 3/8", 1/2") for NHX/UHX/NHXH/UHXH and NOX/UOX connectors.

Key Product Differences

Variants within this series are distinguished by their compatible connector families and physical dimensions. Cable clamps (PCLM) differ based on the specific connector type they secure, such as PCLM-NHX for NHX-series connectors versus PCLM-MTP for MTP connectors. Panel mounting brackets vary in screw spacing and required fastener size; HACL and XACL share identical 34.9 mm / 1⅛" dimensions but serve different connector groups (NHX/UHX vs NOX/UOX), while SHACL features a narrower 27.8 mm / 1⅝" spacing for SHX/USHX connectors, and MTACL utilizes a distinct 29.46 mm / 1.16" dimension with smaller 3-48 screws for MTP applications.

ko-KR
ko_KR
설정 저장