한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
LC8200
2인치 OD 관통형 압축 하중 셀
- 5점 NIST 추적 교정 및
59 kOhm 션트 교정 데이터 - 저프로파일
- 전부 산업용 등급 스테인리스강(예: 304/316 SS)
제품 개요
- 5점 보정 0%, 50%, 100%, 50%, 0%
- 보정 옵션 5 포인트 NIST
- 전기 연결 케이블
- 전기 출력 2 mV/V
- 힘 유형 압축
- 풀 스케일 편차 0.003 in
- 입력 저항 360 Ω 최소
- 선형성 ± 0.5%
- 로드셀 타입 통과 구멍
- 재료 17-4 PH 스테인리스 스틸
- 작동 온도, 최대 121 °C
- 최소 작동 온도 -54 °C
- 외경 2 in
- 출력 저항 350 ± 5 Ω
- 과부하, 최대 300% FS
- 공정 온도, 최대 71 °C
- 최소 공정 온도 16 °C
- 반복성 ± 0.1%
- 안전 과부하 150% FS
- 시리즈 ID LC8200
- 공급 전력 참고 10 Vdc, 최대 15 Vdc
- 공급 전압 10 Vdc
- 열적 스팬 효과 ± 0.036% rdg/°C
- 열 영점 효과 ± 0.009% FSO/°C
- 배선/커넥터 테이블 녹색: (+) 출력; 흰색: (-) 출력; 검정: (-) 입력; 빨강: (+) 입력
- 영점/밸런스 오차 ± 2%
Supported Applications
The Omega LC8200 series consists of compact through-hole compression load cells designed for force measurement applications. These sensors feature a low-profile, all-stainless steel construction intended for rugged industrial environments where space is constrained or integration into existing structures requires a central bore.
Operating Conditions & Performance
The LC8200 series operates within an ambient temperature range of -54 to 121°C (-65 to 250°F). Measurement capabilities span from 0-5 lb (0-2.3 kgf) up to 0-10,000 lb (0-4537 kgf), with a nominal output signal of 2 mV/V and an excitation voltage requirement of 10 Vdc (maximum 15 V). Performance specifications include an accuracy class of ±0.5% FSO and repeatability of ±0.1% FSO.
Physical dimensions vary by capacity range: units rated for 5 to 100 lb have a height of 9.4 mm (0.37"), while those rated from 250 to 10,000 lb feature a height of 16 mm (0.63"). All models maintain an outer diameter (OD) of 51 mm (2.00") and are constructed from 17-4 PH stainless steel.
Configuration Options
The series offers extensive configurability through selectable inside diameters (ID) paired with specific capacity ratings to accommodate various mounting requirements or pass-through needs.
- Inside Diameters: Available ID codes include 125, 188, 250, 375, 500, 625, 750, 875, and 1.00 (representing inches).
- Capacities: Configurable from 5 lb to 10,000 lb.
- Cable Assembly: Each unit includes a 1.5 m (5') 4-conductor shielded cable with the following wire connections: Green (+Output), White (-Output), Black (-Input), and Red (+Input).
- Calibration & Compliance: Units come complete with 5-point NIST-traceable calibration, a 59 kΩ shunt resistor for data verification, and are RoHS compliant.
The model number follows the format LC8200-[ID]-[CAPACITY], such as LC8200-125-5 or LC8200-375-10K. Metric configurations are available upon consultation with engineering.
Key Product Differences
Variation within the series is defined by the combination of inside diameter and load capacity, which dictates both the model number and physical height profile. Lower capacities (5 to 100 lb) utilize a shorter form factor (9.4 mm / 0.37"), whereas higher capacities (250 to 10,000 lb) require an increased height of 16 mm (0.63"). Specific ID options are not available for every capacity; availability is determined by the intersection of the selected diameter and load rating as documented in the series specification tables.
PDF 및 매뉴얼