Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
Series-32A
Compact 1/32 DIN Temp/Process Controllers, Dual Display & Universal Input
콤팩트 1/32 DIN 온도/프로세스 컨트롤러, 듀얼 디스플레이 및 범용 입력- 대형 듀얼 디스플레이
- 셀프 튠
- 퍼지 로직
- 유니버설 입력
- 루프 브레이크 보호
- 피크/밸리 표시
- 백분율 출력 표시
- 조명 키패드
- 16세그먼트 램프/소크 기능
- 자동/수동 스테이션 기능
- 4단계 비밀번호 보호 보안 수준
Series-32A
From
821,626
원
Product Overview
- 정확도 ± 0.25 % 스팬 ± 최소 유효 자릿수 1
- 디스플레이 노트 4자리 7세그먼트 LED 2개, 문자 높이 0.259" (6.35 mm)
- 디스플레이 유형 LED
- 외함 등급 IP66, NEMA 타입 4X
- 입력 제어 신호 0 ~ 20 mA
- 입력 유형 열전대, RTD, DC 전압 또는 DC 전류
- 메모리 백업 비휘발성
- 장착 방향 1/32 DIN
- 표시 자릿수 4
- 작동 온도, 최대 131 °F
- 최소 작동 온도 14 °F
- 전력 소비 최대 5 성우
- RTD 입력 범위 JPt 100: -4 ~ 752 °F; Pt 100: -328 ~ 1562 °F; Ni 120: -112 ~ 572 °F; Cu 50: -58 ~ 302 °F
- 시리즈 ID Series-32A
- 공급 전력 참고 100~240 Vac, 정격, +10 - 15%, 50~400 Hz, 단상; 132~240 Vdc, 정격, +10 - 20%
- 전원 유형 AC / DC
- 공급 전압 100 ~ 240 Vac, 132 ~ 240 Vdc
- 온도 센서 유형 RTD 또는 열전쌍
- 열전대 입력 범위 사양 참고 K형: -328~2372 °F; J형: -148~2192 °F; T형: -328~752 °F; E형: 32~1112 °F; W형: -328~2372 °F; R형: 32~3092 °F; S형: 32~3092 °F; B형: 212~3272 °F; L형: -328~1562 °F; U형: -328~932 °F
- 전압 입력 범위 0 ~ 5 V, 0 ~ 10 V
- 무게 4 oz
Supported Applications
The Dwyer Series 32A is a compact, microprocessor-based temperature and process controller designed for panel mounting in industrial automation environments. As the world's first dual display 1/32 DIN temperature/process controller, it supports universal input selection including thermocouple, RTD, DC voltage, or DC current signals.
Key functional capabilities documented for this series include:
- Dual Display Operation: Simultaneous display of Process Value (PV) and Setpoint (SV).
- Advanced Control Logic: Self-tune, fuzzy logic control algorithms.
- Ramp/Soak Profiles: 16-segment ramp/soak function for precise thermal cycling.
- Status Indication: Peak and valley indication with percent output display.
Operating Conditions & Performance
The Series 32A operates within an ambient temperature range of 14 to 131°F (-10 to 55°C). The unit features a front panel rating of NEMA 4X (IP66), providing protection against dust and water ingress. Power consumption is rated at 5 VA maximum.
Performance specifications for the series include:
- Accuracy: ±0.25% of span, ±1 least significant digit.
- Display Resolution: Two 4-digit, 7-segment LEDs with a height of 0.259 in (6.35 mm).
- Memory Backup: Nonvolatile memory requiring no batteries.
The controller incorporates loop break protection and four password-protected security levels to safeguard configuration parameters.
Control Output Ratings
- Relay (SPST): 3A @ 240 VAC resistive; 1.5A @ 240 VAC inductive. Pilot duty rating: 250 VA, 2A @ 120 VAC or 1A @ 240 VAC.
- Switched Voltage (Non-isolated): 5 VDC @ 20 mA.
- Proportional Current: 0 to 20 mADC, scaleable into a maximum of 600 Ohms load resistance.
Power Supply Options
- Standard Input: 100 to 240 VAC nominal (+10% -15%), 50 to 400 Hz single phase; or 132 to 240 VDC nominal (+10% -20%).
- Option 9502: Low voltage input of 12-24 VDC/VAC, 50-400Hz.
Physical Dimensions & Installation
The unit weighs 4 oz (114 g). The required panel cut-out is 1.772 x 0.874 in [45 x 22 mm], with a maximum supported panel thickness of 0.25 in [6.35 mm].
Configuration Options
The Series 32A is available in multiple configurations defined by alarm programming and output combinations. The model number structure follows the format: `32A<MODEL>` (e.g., 32A020, 32A123, 32A153). Available variants include:
- No Alarm / Single Output: Models such as 32A020 (5 VDC), 32A050 (Current), and 32A030 (Relay).
- Alarm / Dual Output: Models such as 32A123 (5 VDC + Relay) and 32A133 (Dual Relay).
- Alarm / Current & Relay: Model 32A153.
The series supports optional RS-485 serial communication (-992) for remote reading and writing of control parameters. Accessories include the MN-1 Mini-Node™ USB/RS-485 converter, LoveLinks III configuration software, and A-600 R/C snubber.
Snubber Protection (Relay Outputs)
To protect relay output devices from electrical noise generated by contactors or solenoids, the series documentation recommends using a snubber. The general purpose snubber part number is 541-0014. Alternatively, a custom assembly may be constructed using a 0.5 µF capacitor (600V) in series with a 100 Ω resistor (1/4 W), connected as close to the coil terminals as possible.
Key Product Differences
Variants within the Series 32A differ primarily by their alarm capability and output signal configuration. The standard model selection table defines six distinct configurations:
- Model 32A020: No Alarm, Output A = 5 VDC, Output B = None.
- Model 32A123: Yes (Alarm), Output A = 5 VDC, Output B = Relay.
- Model 32A133: Yes (Alarm), Output A = Relay, Output B = Relay.
- Model 32A153: Yes (Alarm), Output A = Current, Output B = Relay.
- Model 32A050: No Alarm, Output A = Current, Output B = None.
- Model 32A030: No Alarm, Output A = Relay, Output B = None.
The series also offers an optional low-voltage power supply (-9502) and RS-485 communication (-992). Note that only Option 9502 may be combined with another option; no other options are combinable.
PDFs & Manuals
Software & Drivers
Accessories
accessories
R/C snubber (recommended for inductive loads like a solenoid or contactor)
AUD74.58 / each
0 In Stock
sensors
J type, 100’ on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM
AUD135.18 / each
0 In Stock
K type, 100' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM
AUD250.55 / each
0 In Stock