검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

LC302

직경 0.75인치, 소형 버튼 압축 하중 셀

재고가 있는 모델
  • 작은 0.75인치(19 mm) 직경
  • 낮은 0.5인치(13 mm) 프로파일
  • 로봇 및 테스트 벤치 응용
  • 간편한 설치를 위한 내장형 로드 버튼
LC302
시작 962,062 원
재고가 있는 모델
직경 0.75인치, 소형 버튼 압축 하중 셀 LC302 LC302
loading all models
제품 개요
  • 5점 보정 0%, 50%, 100%, 50%, 0%
  • 정확도 ± 0.5%
  • 브리지 저항 350 Ω
  • 케이블 길이 5 ft
  • 보정 옵션 5 포인트 NIST
  • 전기 연결 케이블
  • 전기 출력 1 mV/V
  • 외함 등급 IP54
  • 힘 유형 압축
  • 풀 스케일 편차 0.003 in
  • 히스테리시스 ± 0.5%
  • 선형성 ± 0.5%
  • 로드셀 타입 버튼
  • 재료 스테인리스 스틸
  • 작동 온도, 최대 107 °C
  • 최소 작동 온도 -54 °C
  • 과부하, 최대 300% FS
  • 공정 온도, 최대 71 °C
  • 최소 공정 온도 16 °C
  • 반복성 ± 0.5%
  • 안전 과부하 150% FS
  • 시리즈 ID LC302
  • 공급 전력 참고 5 Vdc, 최대 15 Vdc
  • 공급 전압 5 Vdc
  • 열적 스팬 효과 0.036% FSO/°C
  • 열 영점 효과 0.009% FSO/°C
  • 배선/커넥터 테이블 녹색: (+) 출력; 흰색: (-) 출력; 검정: (-) 입력; 빨강: (+) 입력
  • 영점/밸런스 오차 ± 2%

Supported Applications

The Omega LC302 series comprises miniature button compression load cells designed for robotic and test bench applications. These sensors feature a low profile of 12.7 mm (0.50") height with an integrated built-in load button to facilitate easy installation in compact spaces.

Operating Conditions & Performance

The LC302 series delivers high accuracy performance with combined linearity, hysteresis, and repeatability of ±0.5% FSO. Each unit includes a 19 mm (0.75") diameter stainless steel housing rated IP54 for environmental protection.

  • Measurement Range: Standard models cover 25 lb to 1,000 lb; Metric models range from 100 N to 5,000 N.
  • Operating Temperature (Ambient): 16 to 71°C (60 to 160°F).
  • Process Temperature: -54 to 107°C (-65 to 225°F).
  • Excitation Voltage: 5 Vdc, with a maximum of 15 Vdc.
  • Output Signal: Nominal 1 mV/V.

The series includes a built-in temperature compensation board and comes complete with 5-point NIST-traceable calibration data along with 59 kΩ shunt data for verification.

Configuration Options

The LC302/LCM302 Series is available in two distinct model families to accommodate different unit preferences, each offering specific capacity steps and compatible meter options.

Standard Models (LC302)

  • Capacities: 25 lb (111 N), 50 lb (222 N), 100 lb (445 N), 250 lb (1,112 N), 500 lb (2,224 N), and 1,000 lb (4,448 N).
  • Compatible Meters: DPiS, DP41-S, DP25B-S.

Metric Models (LCM302)

  • Capacities: 100 N (22.5 lb), 200 N (45 lb), 500 N (112 lb), 1,000 N (225 lb), 2,000 N (450 lb), and 5,000 N (1,124 lb).
  • Compatible Meters: iSeries, DP41-S, DP25B-S.

All variants feature a load resistance of 350 Ω minimum and are supplied with a 1.5 m (5') 4-conductor insulated cable for electrical connection.

Key Product Differences

The primary distinction within the series lies between the LC302 standard models, which prioritize pound-force capacities up to 1,000 lb, and the LCM302 metric models, which provide Newton-based ranges extending to 5,000 N. While both families share identical physical dimensions—19 mm (0.75") diameter with a spherical radius of 5.08 mm (0.200")—they differ in their specific capacity increments and the compatible meter series listed for each model number.

ko-KR
ko_KR
설정 저장