검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

SERIES-260W

0.260인치 보어 직경 소켓 용접형 써모웰

  • 표준 삽입 길이 2 1/2인치에서 22 1/2인치까지
  • 스테인리스 스틸, 탄소강 및 황동 재질 제공
  • OMEGA™ NB1, NB2, PR12, PR14, NPT 스타일 프로브 및 DialTempTM 온도계와 호환 가능
SERIES-260W
시작 89,715 원
0.260인치 보어 직경 소켓 용접형 써모웰 SERIES-260W SERIES-260W
loading all models
제품 개요
  • 보어 직경 0.26 in
  • 플랜지 직경 0 in
  • 파이프 크기, 최대 1.05 in
  • 공정 온도, 최대 1200 °F
  • 최소 공정 온도 70 °F
  • 시리즈 ID SERIES-260W
  • 우물 유형 소켓 용접

Supported Applications

The Omega Series 260W Socket-Weld Design Thermowells are engineered for temperature measurement using standard length ¼" diameter elements. The series is designed to resist corrosion and is specified for use in chemical baths. These thermowells feature color-coded sensors intended for process control applications.

Operating Conditions & Performance

The Series 260W accommodates a socket-weld design with nominal pipe sizes of ¾" or 1", fitting ASA welding fittings and flanges. The internal bore diameter is fixed at 0.260 in (¼"). Pressure ratings are material-dependent and vary by temperature, as defined in the series pressure-temperature table:

  • Brass: Rated up to 5000 psi at 70°F; rating decreases with increasing temperature.
  • Carbon Steel (C-1018): Rated up to 5200 psi at 70°F, decreasing to 3500 psi at 800°F and 1500 psi at 1000°F.
  • A.I.S.I. 304: Rated up to 7000 psi at 70°F; maintains ratings through 600°F (5400 psi) down to 1650 psi at 1200°F.
  • A.I.S.I. 316: Rated up to 7000 psi at 70°F and 200°F; decreases to 6100 psi at 800°F, 5100 psi at 1000°F, and 2500 psi at 1200°F.
  • Monel: Rated up to 6500 psi at 70°F; decreases to 5300 psi at 600°F and 1500 psi at 1000°F.

The series supports stem lengths (A) of 4, 6, 9, 12, 15, 18, or 24 inches. Insertion lengths (U) are available in increments from 2½ to 22½ inches.

Configuration Options

The Series 260W offers configurable dimensions and materials to match specific process requirements:

  • Pipe Size & Shank Diameter: Available in ¾" nominal (1.050" diameter) with a ¾" shank, or 1" nominal (1.315" diameter) with a 7/8" shank.
  • Wetted Materials: Standard options include Carbon Steel (C-1018), A.I.S.I. 304, A.I.S.I. 316, and Brass. Other materials are available upon request.
  • Insertion Lengths: Configurable in U2½, U4½, U7½, U10½, U13½, U16½, or U22½ inches.
  • Stem Lengths: Available as 4, 6, 9, 12, 15, 18, or 24 inches.

Options and Accessories

The series supports several optional configurations to enhance functionality or protection:

  • Caps and Chains: Add suffix "-CC" for a 304 SS cap, or "-CC-Brass" for a Brass cap (additional cost).
  • Lagging Extensions: Available to permit standard element use; consult Series 260L and 385L lengths.
  • Protective Coatings: PFA, Epoxy, and other materials are available upon consultation with Sales.
  • Response Rate Enhancement: Use OT-201 Conductive Silicon Paste to increase response rate (see omega.com).

Compatibility Notes

The Series 260W is compatible with OMEGA® NB1, NB2; PR-12, PR-14, and NPT-style probes, as well as DialTemp™ Thermometers. Metric models are available via omega.com.

Key Product Differences

The Series 260W is distinguished by its socket-weld design intended for permanent installation into piping systems using ASA welding fittings or flanges. Model numbers follow the format PipeSize-260W-UInsertLength-MaterialSuffix. For example, a model designated "3/4-260W-U7½-304SS" indicates a ¾" pipe size thermowell with a 7½" insertion length and A.I.S.I. 304 stainless steel construction.

Material selection directly impacts the maximum allowable pressure at elevated temperatures, as detailed in the series-specific rating table. While Carbon Steel offers high strength at lower temperatures (5200 psi at 70°F), it is not rated for service above 1000°F. Conversely, A.I.S.I. 316 maintains a higher pressure rating (2500 psi) at 1200°F compared to Carbon Steel and Monel.

Shank diameter varies by pipe size: the ¾" nominal model utilizes a ¾" shank, while the 1" nominal model uses a 7/8" shank. Both configurations maintain the standard ¼" internal bore for element compatibility.

3/41-260W-U21/241/271/2101/2131/2161/2221/2-304SS316SSCS황동
외경
삽입 길이 치수
재질
ko-KR
ko_KR
설정 저장