日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
OM-CP-XTCTemp2000-Srs
Xシリーズ - LCD付きマルチチャネル熱電対データロガー
- 大型バックライトLCDディスプレイ
- ユーザーフレンドリーなフロントパネル
- 複数ポイントの監視
- 熱電対タイプJ、K、T、E、R、S、B、N対応
製品の概要
- 校正 ソフトウェアによるデジタルキャリブレーション
- データインターフェース Wi-Fi
- データインターフェースに関する注意事項 USB-A から micro USB ケーブル(付属);460,800 ボー
- 電気接続 ネジ端子
- エンクロージャー アルミニウム
- フォームファクター ベンチトップ
- LEDインジケータ チャネルごとに1つおよび2つのステータスLED
- 長さ 184.15 mm
- 動作温度(最高) 60 °C
- 動作温度(最低) -20 °C
- プロセス温度(最高) 60 °C
- プロセス温度(最低) -20 °C
- リアルタイム記録 PCと組み合わせてリアルタイムでデータを監視および記録するために使用可能
- サンプル、マックス 2000000
- サンプリングレート 1日
- サンプリングレート注記 4 Hz から 24時間に1回の読み取りまで
- シリーズID OM-CP-XTCTemp2000-Srs
- ソフトウェア互換性 Windows® XP/VISTA/7 および 8(32ビットおよび64ビット)
- 起動モード 遅延開始(調整可能), インスタントスタート
- 電源タイプ バッテリー
- 温度精度 ± 0.5°C
- 温度精度の注記 ± 0.5 °C(0 °C~50 °C) ± 0.9 °F(32 °F~131 °F)
- 温度分解能 0.01°C
- 温度センサーの種類 熱電対
- 熱電対抵抗、最大限度 1000 Ω
- 時間精度 ± 1分/月
- 幅 65.58 mm
- 線径 24 AWG
Supported Applications
The OM-CP-QUADTCTEMP2000-A2 and OM-CP-OCTTCTEMP2000-A2 are four and eight channel thermocouple data loggers with an LCD screen. The integrated display, with on-screen minimum, maximum and average statistics, makes the series well suited to applications where readings must be checked at the point of measurement without connecting to a computer.
Because the devices accept J, K, T, E, R, S, B and N type thermocouples across a wide temperature span, they support multi-point temperature monitoring and thermal recording in industrial and laboratory settings. A user configurable screen that allows any combination of channels to be displayed makes them convenient for field checks and walk-up verification.
- Multi-point thermocouple temperature monitoring
- Point-of-measurement readings via the on-board LCD
- Industrial and laboratory thermal recording
- Field verification of live and statistical values
Operating Conditions & Performance
The internal channels measure over a temperature range of -20 °C to +60 °C (-4 °F to +140 °F) with a resolution of 0.01 °C (0.018 °F). Calibrated accuracy is ±0.5 °C (0 °C to 50 °C) and ±0.9 °F (32 °F to 131 °F). The loggers operate in an environment of -20 °C to +60 °C (-4 °F to +140 °F) and 0 %RH to 95 %RH non-condensing.
Remote thermocouple channels use a female subminiature (SMP) connection and accept a maximum thermocouple resistance of 1000 Ω, <100 Ω recommended, with automatic cold junction compensation based on the internal channel. Accuracy is ±0.5 °C for the J, K, T, E and N types and ±2.0 °C for the R, S and B types.
The reading rate ranges from 4 Hz up to 1 reading every 24 hours. Memory capacity with all channels enabled is 524,032 readings per channel on the 4-channel model and 262,016 readings per channel on the 8-channel model. Data is date and time stamped in °C, °F, K, °R, mV, V, and time accuracy is ±1 minute/month.
Each unit uses a 9 V lithium battery (included and user replaceable) rated for 18 months with the display off and 3 months with continuous display use. Connection is through a USB-A to micro USB cable (included) at 460,800 baud, with software programmable immediate start or delay start up to 6 months in advance and digital calibration through software. The series carries CE approval.
Configuration Options
The two members of the series differ in channel count, physical size, and memory depth while sharing the same measurement performance and LCD feature set. The 4-channel OM-CP-QUADTCTEMP2000-A2 measures 7.25 in x 2.70 in x 1.22 in (184.15mm x 65.58 mm x 30.99 mm) and weighs 15.3 oz (435 g), storing 524,032 readings per channel. The 8-channel OM-CP-OCTTCTEMP2000-A2 measures 7.25 in x 2.70 in x 1.68 in (184.15mm x 65.58 mm x 42.672 mm) and weighs 20.1 oz (569 g), storing 262,016 readings per channel.
Both models accept the same thermocouple types. Type J covers -210 to +760 °C, type K covers -270 to +1370 °C, type T covers -270 to +400 °C, type E covers -270 to +980 °C, type N covers -270 to +1300 °C, type R covers -50 to +1760 °C, type S covers -50 to +1760 °C, and type B covers +50 to +1820 °C.
Both variants provide the on-screen minimum, maximum and average statistics, the user configurable screen that displays any combination of channels, automatic cold junction compensation, and real time recording with a PC. The OM-CP-BAT103 replacement battery allows user servicing on either model.
Key Product Differences
- OM-CP-QUADTCTEMP2000-A2 - 4-Channel Thermocouple Data Logger with LCD screen and USB-A to micro USB cable
- OM-CP-OCTTCTEMP2000-A2 - 8-Channel Thermocouple Data Logger with LCD screen and USB-A to micro USB cable
- OM-CP-BAT103 - Replacement 9V lithium battery