検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

OM-CP-XRTDTemp-Series

Xシリーズ - マルチチャネルRTD温度ロガー

  • ± 0.04 °C 校正精度
  • リアルタイム動作
  • 最大4 Hz 読み取り速度
  • プッシュボタンまたはプログラム可能な開始時間
OM-CP-XRTDTemp-Series
販売元 ¥ 191,886
Xシリーズ - マルチチャネルRTD温度ロガー OM-CP-XRTDTemp-Series OM-CP-XRTDTemp-Series
loading all models
製品の概要
  • 校正 ソフトウェアによるデジタルキャリブレーション
  • データインターフェース USB
  • データインターフェースに関する注意事項 USB-A から micro USB ケーブル(付属);460,800 ボー
  • 電気接続 ネジ端子
  • エンクロージャー アルミニウム
  • フォームファクター ベンチトップ
  • LEDインジケータ チャネルごとに1つおよび2つのステータスLED
  • 長さ 65.6 mm
  • 動作湿度 0 ~ 95% RH
  • 動作温度(最高) 60 °C
  • 動作温度(最低) -20 °C
  • プロセス温度(最高) 850 °C
  • プロセス温度(最低) -200 °C
  • プロセス温度注記 18.5 Ω~390.5 Ω -200 °C~+850 °C(-328 °F~+1562 °F)(プローブ依存)
  • リアルタイム記録 PCと組み合わせてリアルタイムでデータを監視および記録するために使用可能
  • サンプル、マックス 2800000
  • サンプリングレート 1日
  • サンプリングレート注記 4 Hz から 24時間に1回の読み取りまで
  • シリーズID OM-CP-XRTDTemp-Series
  • ソフトウェア互換性 Windows XP SP3/7/8/10
  • 起動モード 遅延開始(調整可能), インスタントスタート
  • 電源タイプ バッテリー
  • 温度分解能 0.001°C
  • 温度分解能の注記 0.0001 Ω 0.001 °C (0.0018 °F)(プローブ依存)
  • 温度センサーの種類 RTD
  • 時間精度 ± 1分/月
  • 幅 184.2 mm

Supported Applications

The Omega OM-CP-RTDTempX Series consists of multi-channel RTD-based temperature data loggers designed for remote temperature monitoring or multiple points in a central location. These devices support simultaneous logging across all channels, enabling users to capture date and time-stamped data for analysis after the monitoring cycle is complete. The series facilitates real-time recording when used with a PC via free OM-CP software.

Operating Conditions & Performance

The X-Series measures temperatures from -200 °C to +850 °C (-328 °F to +1562 °F), which is probe dependent. A specified accuracy range of -200 °C to +200 °C (-328 °F to 392 °F) applies for calibrated accuracies based on standard Omega calibrations for the 0 Ω to 200 Ω range. Temperature resolution is 0.001 °C (0.0018 °F), and resistance resolution is 0.0001 Ω, both probe dependent.

Calibrated accuracy is ±0.04 °C (±0.072 °F) for temperature measurements and ±0.015 Ω @ 25 °C (77 °F) ambient. The reading rate ranges from 4 Hz up to 1 reading every 24 hours. Time accuracy is specified as ±1 minute/month, with a typical battery life of 18 months using the included user-replaceable 9 V lithium battery.

Operating environment limits are -20 °C to +60 °C (-4 °F to +140 °F) and 0 %RH to 95 %RH non-condensing. The enclosure is constructed of black anodized aluminum, and the series carries CE and ROHS approvals.

Input Connection & Probe Compatibility

The input connection utilizes a removable screw terminal supporting 2, 3, or 4 wire interfaces. Temperature specifications are based on ideal 100 Ω Pt RTD compliant with IEC 751 (1983) and ITS-90, using a 5000 Ω FSR configuration.

  • Recommended: 100 Ω, 2 or 4 wire RTD probes for the most accurate performance.
  • Note on 3-wire compatibility: Most 100 Ω, 3 wire RTD probes will work, but accuracy is not guaranteed. To determine if a 3-wire probe works, resistance between two same-colored wires should be less than 1 Ω.

Configuration Options

The series offers four channel configurations: 4-channel, 8-channel, 12-channel, and 16-channel. Memory capacity varies by the number of enabled channels; with all channels active, storage ranges from 698,709 readings per channel (4-channel) down to 174,677 readings per channel (16-channel). Users can enable or disable individual channels to maximize memory and name each channel with up to a ten-digit title.

Physical Dimensions & Weight

Housing dimensions increase with channel count:

  • 4-channel / 8-channel: 2.70 in x 7.25 in x 1.22 in (65.6 mm x 184.2 mm x 31.0 mm); Weight: 13 oz (368 g).
  • 12-channel: 2.70 in x 7.25 in x 1.68 in (65.6 mm x 184.2 mm x 42.7 mm); Weight: 20 oz (580 g).
  • 16-channel: 2.70 in x 7.25 in x 2.14 in (65.6 mm x 184.2 mm x 54.4 mm); Weight: 28 oz (800 g).

Software & Data Management

The series ships with a USB-A to micro USB cable for connection to Windows XP SP3/7/8/10 systems at 460,800 baud. Start modes include software-programmable immediate start or delay start up to 6 months in advance. Digital calibration is performed through the software, and the calibration date is automatically recorded within the device.

Data formats support C, °F, K, °R, and Ω units with graphical, tabular, and statistical analysis options via OM-CP Standard Software version 4.2.19.0 or later, or Secure Software version 4.2.18.0 or later.

Key Product Differences

The series is available in four distinct model numbers corresponding to channel count:

  • OM-CP-QUADRTDTEMP-A2: 4-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.
  • OM-CP-OCTRTDTEMP-A2: 8-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.
  • OM-CP-X12RTDTEMP-A2: 12-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.
  • OM-CP-X16RTDTEMP-A2: 16-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.

A replacement battery is available as part number OM-CP-BAT103. The device stops recording when memory ends or the user stops it; re-arming via computer is required before restarting.

ja-JP
ja_JP
設定を保存する