検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

IN-UVI-Bridge-Amplifier

ホイートストンブリッジ インラインアンプ フィールド選択可能I/O付き

  • 幅広いフィールド選択可能な入力および出力
  • トランスデューサ接続用の完成ケーブルアセンブリを新たに提供!
  • 入出力アイソレーション
  • 低熱ドリフト
IN-UVI-Bridge-Amplifier
販売元 ¥ 447,998
ホイートストンブリッジ インラインアンプ フィールド選択可能I/O付き IN-UVI-Bridge-Amplifier IN-UVI-Bridge-Amplifier
loading all models
製品の概要
  • 承認 CE
  • ブリッジ抵抗 350 ~ 5000 Ω
  • 校正に関する注記 フィールド設置型シャント校正抵抗器(リモート起動対応)ブリッジ校正用
  • 静電容量 0.022 µF
  • EMC
  • エンクロージャーの定格 IP65
  • 高さ 34.8 mm
  • 入力ノイズ 10 mVピークツーピーク @ 3 mV/V 電圧モード(10 Vdc) 20 uAピークツーピーク 電流モード
  • 入力範囲 90 mA、0.5 mV/Vから4 mV/Vまで、0.5ステップで
  • 入力範囲注記 現在:最大90 mA(200 mAの供給能力が必要)、センサー入力:0.5 mV/Vから4 mV/Vまで0.5ステップ
  • 入力タイプ 電流、信号
  • 絶縁 100 MΩ @ 500 Vdc
  • 長さ 134.8 mm
  • 直線性 0.0001
  • 荷重抵抗 20 mA時の700 Ω
  • 長期安定性 FSの0.1%/年
  • 動作温度(最高) 60 °C
  • 動作温度(最低) -20 °C
  • 出力詳細 現在:4~20 mA、12 mAゼロ ±8 mA出力フィールドプログラム可能、電圧:±5ボルト、最大2 mAで±10ボルト
  • 出力抵抗 60 Ω
  • 保護 短絡保護: はい +出力から -出力へ
  • 応答時間 200 µs
  • 応答時間の注記 200 µs(0~63%)
  • 検出感度 ブリッジ:5 Vdc EXCで1~8 mV/V、10 Vdc EXCで0.5~4 mV/V
  • センサー励起 5 または 10 Vdc フィールドプログラマブル; 10 Vdc で 30 mA
  • シリーズID IN-UVI-Bridge-Amplifier
  • スパン調整 ± 20 %(微調整) ± 40 %(粗調整
  • 電源 22~32 Vdc
  • 電源注記 出力から絶縁された22~32 Vdc
  • 電源タイプ DC
  • 熱スパン効果 0.0025%/°F
  • 熱ゼロ点効果 0.001%/°F
  • トリムポットアクセス コネクターエンドキャップの裏側
  • 幅 31.2 mm
  • ゼロ点設定調整範囲 ±30%

Supported Applications

The Omega IN-UVI series is a Wheatstone bridge in-line signal conditioner designed for use with miniature transducers, including load cells and pressure transducers. It connects between the sensor and a readout instrument or data acquisition (DAQ) system to convert millivolt signals into standardized voltage or current outputs. The rugged stainless steel enclosure supports deployment where space is limited or environments are hostile.

Operating Conditions & Performance

The IN-UVI operates within an ambient temperature range of -20 to 60°C (0 to 140°F) and provides IP65 environmental protection. It accepts a supply voltage of 22 to 32 Vdc, isolated from the output by 500 Vdc with 100 MΩ resistance. The device features programmable bridge excitation at either 5 or 10 Vdc (field selectable) and supports sensor input ranges from 0.5 mV/V to 4 mV/V in 0.5 steps.

Performance specifications include a linearity of ±0.01% of FS, long-term zero drift of 0.1%/year of FS, and temperature effects of ±0.001%/°F for zero (auto-zero front end) and ±0.0025%/°F for span. The response time is documented as 200 μS (0 to 63%) for a 350 Ω bridge and 1.2 mS for a 5,000 Ω bridge.

Configuration Options

The series offers configurable output signals including voltage options of ±5 Vdc or ±10 Vdc (at 2 mA max) and current outputs of 4-20 mA or 12 mA zero ±8 mA. The maximum load resistance is rated at 700 Ω at 20 mA for current mode, with an output resistance of 60 Ω.

Key configurable features include:

  • Excitation Voltage: Field programmable selection between 5 Vdc or 10 Vdc (max excitation current 30 mA @ 10 Vdc).
  • Sensor Input Range: Supports bridge sensitivities of 1 to 8 mV/V at 5 Vdc EXC, and 0.5 to 4 mV/V for 10 Vdc EXC.
  • Bridge Resistance Compatibility: Accepts transducer resistances from 350 to 5,000 Ω.
  • Calibration Features: Includes a buffered solid-state shunt calibration feature that can be remotely activated for field checking and adjustment. Zero adjustment range is ±30% of FS; span adjustment offers ±20% fine and ±40% coarse ranges, accessible behind connector endcaps.
  • Electrical Connections: Available with M12 connectors (5-pin or 8-pin) or flying leads. Accessories include the M12.5-S-F-FM for sensor connection and M12.8-S-F-FM for input/output connections, both featuring cable glands.

Key Product Differences

The IN-UVI series is identified by the model number guide CA-4PC24-2A-xxx-INUVI structure when configured with specific Omega cable assemblies. Standard cable part numbers are available for various transducer types, including load cells (e.g., LC111, LCHD) and pressure sensors (e.g., PX35, PX6000). The physical dimensions of the unit are 134.8 mm L x 34.8 mm H x 31.2 mm D (5.3 x 1.37 x 1.23 in), with a diameter of 31.2 mm (1.23 in). The series carries CE certification and includes a one-year warranty.

ja-JP
ja_JP
設定を保存する