日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-Mark
ロータリー/リニアバルブおよびアクチュエータ用防候性位置指示器
- 厚手の白色スチレン-アクリロニトリル製ハウジングはほぼ破壊不可能
- 適度な過圧はオーバーフロータンク(モデル25)またはフロート作動オーバーフロートラップ(モデル40)で対応
- 任意の垂直面に取り付け可能
製品の概要
- 高度(最大) 2000 m
- 電気接続 3/4インチ NPT メスコンジット(ネジ端子台付き)
- 電気接続に関する注意事項 ネジ端子。オプションの工場密封リードは16 AWGで長さ36インチ(914.4 mm)。配管接続:標準は3/4インチメスNPTが1つ;オプションで1/2インチメスNPTが1~2つ;WirelessHART®モデルは1/2インチメスNPTが2つ;オプションとして、すべてのモデルに対して3/4インチおよび1/2インチメスNPTの代わりにM25×1.5またはM20×1.5接続が供給される場合があります。
- エンクロージャーの定格 危険場所対応, NEMA タイプ 1, NEMA タイプ 12, NEMA タイプ 13, NEMA タイプ 2, NEMA タイプ 3, NEMA タイプ 3R, NEMA タイプ 3s, NEMA タイプ 4, NEMA タイプ 4X, NEMA タイプ 6, NEMA タイプ 7, NEMA タイプ9
- 筐体の定格に関する注意事項 製品評価: 耐候性および耐火性。NEMA 1、2、3、3R、3S、4、4X、6、7、9、12、13。 UL認定:クラスI、区分1および2、グループB、C、D(一部ユニットはグループA対応、工場に相談);クラスII、区分1および2、グループE、F、G。 CSA認定:クラスI、区分1および2、グループA、B、C、D;クラスII、区分1および2、グループE、F、G。15メートルまでの水中使用可能(IP68);防水シールを確実にするための適切な継手の調達はエンドユーザーの責任。 ATEX準拠: -Bサフィックス、指令2014/34/EU、KEMA 03ATEX2391 X、2813 II 2G Ex db IIC T6 Gb(-25°C/-40°C/-50°C ≤ Tamb ≤ 63°C)およびT5(-25°C/-40°C/-50°C ≤ Tamb ≤ 63°C)、出力およびスイッチタイプにより文言は異なる場合あり。EN 60079-0、EN 60079-1準拠。 -ISサフィックス、指令2014/34/EU、KEMA 03ATEX1392 X、2813 II 1G Ex ia IIC T4 Ga。EN 60079-0、EN 60079-11準拠。 IECEx準拠: -IEサフィックス、IECEx DEK 11.0056X Ex db IIC T6 Gb(-25°C/-40°C/-50°C ≤ Tamb ≤ 63°C)およびT5(-25°C/-40°C/-50°C ≤ Tamb ≤ 63°C)、出力およびスイッチタイプにより文言は異なる場合あり。IEC 60079-0、IEC 60079-1準拠。 -IIサフィックス、IECEx DEK 11.0061X Ex ia IIC T4 Ga。IEC 60079-0、IEC 60079-11、IEC 60079-26準拠。 UKEX準拠: -BXサフィックス:DEKRA 21UKEX0274X、Ex db IIC T6 Gb(-25°C/-40°C/-50°C ≤ Tamb ≤ 63°C)、出力およびスイッチタイプにより異なる。EN 60079-0およびEN 60079-1準拠。 -ISXサフィックス:DEKRA 21UKEX0333X、Ex ia IIC T4 Ga、EN 60079-0およびEN 60079-11準拠。
- 取付方向 位置感応ではない
- 動作温度(最高) 176 °F
- 動作温度(最低) -58 °F
- 運用寿命 1,000万回以上のサイクル
- シリーズID Series-Mark
- セットポイント調整 5~360°
- スイッチノート 15 A @ 125/250/480 Vac (~) ; 1/8 hp @ 125 Vac (~), 1/4 hp @ 250 Vac (~), 1/2 A @ 125 Vdc, 1/4 A @ 250 Vdc
- 重量 6 lb
Supported Applications
The Dwyer Series Mark Position Indicators/Transmitters provide position feedback and switching for rotary valves (direct drive) and linear control valves or gate valves (lever drive). The series covers applications requiring visual indication, discrete switch outputs, analog potentiometer signals, 4-20 mA transmitters, and HART® communication. Standard models are designed to be weatherproof, flameproof, and submersible.
Specific application configurations include:
- Direct Drive (Rotary Valves): Units utilize a magnetic coupling or through-shaft drive for 1/4-turn actuators. A stainless steel mechanical visual indicator is standard on direct drive units, providing open/closed indication and an adjustable degree scale.
- Lever Drive (Linear/Multi-Turn Valves): The Mark 3 model uses a magnetic drive designed for multi-turn applications ranging from 1 to 25 revolutions. Mounting kits are available with drive yokes or slotted lever arms for specific valve and actuator interfaces.
- Hazardous Locations: Models are offered with UL, CSA, ATEX (Directive 2014/34/EU), and IECEx certifications for Class I, Div. 1 & 2; Class II, Div. 1 & 2 locations.
Operating Conditions & Performance
The Series Mark operates across a broad ambient temperature envelope depending on the output type and hazardous location certification selected:
- Ambient Temperature Range:-58 to 176°F (-50 to 80°C) for standard configurations. Specific limits apply based on switch types (e.g., Switch Type C rated to 350°F/176°C for 600 hours; Switch Type T rated to 250°F/121°C continuous). ATEX flameproof (-B suffix) and IECEx flameproof (-IE suffix) units are rated -40 to 145°F (-40 to 63°C) or lower depending on the switch type. Intrinsically safe models (ATEX -IS, IECEx -II) have reduced ranges such as -13 to 104°F (-25 to 40°C).
- Enclosure Ratings:NEMA 1, 2, 3, 3R, 3S, 4, 4X, 6, 7, 9, 12, and 13. Units are submersible to 15 meters (IP68) when fitted with proper watertight fittings.
- Accuracy:Potentiometer outputs offer ±0.5% of FS standard or optional ±0.25% of FS. Transmitter and HART® models also provide ±0.5% of FS (optional ±0.25%).
- Operational Life:Over 10,000,000 cycles.
- Altitude:Maximum altitude is 2000 meters; extended to 5000 meters for specific Mark 1, 3 & 4 models with designated switch types (A, B, C, G, I, T, V, or W).
Configuration Options
The series is configurable across three primary model styles—Mark 1 (magnetic coupling), Mark 3 (multi-turn magnetic drive), and Mark 4 (through-shaft)—with extensive options for outputs, switches, enclosures, and hazardous location compliance.
Output Signals & Switch Types
The series supports a wide range of electrical interfaces:
- Potentiometer Outputs:Standard 1000 Ω; optional 2000, 5000, 10000, or 20000 Ω.
- Analog Transmitters:4-20 mA output with power requirements of 5-30 VDC (standard) or 8-30 VDC (HART® models).
- HART® Communication:Available on Mark 1 and 4 transmitters, supporting Rx = 500 kΩ; Cx = 2500 pF.
- Switch Outputs:Configurable for 1 to 6 switches. Available types include SPDT snap (Types A, S, V), high-temperature snap (Type C: 350°F/176°C; Type T: 250°F/121°C continuous), gold contact (Types G, W), hermetically sealed (Types H, R), inductive sensors (Type B, NAMUR Type I), and magnetic blow-out (Type M).
Enclosures & Materials
Housing options include painted aluminum (black, white epoxy with SS trim, red) or cast 316 stainless steel. Electrical connections are provided via screw terminals or optional factory-sealed leads (36"/914.4 mm of 16 AWG). Conduit entries support standard one 3/4" female NPT; optional configurations include one to two 1/2" female NPT, M25 X 1.5, or M20 X 1.5 connections.
Hazardous Location Options
Models are available with specific suffixes for compliance:
- ATEX Flameproof (-B):KEMA 03ATEX2391 X, CE 2813 II 2G Ex db IIC T6 Gb.
- ATEX Intrinsically Safe (-S/IS):KEMA 03ATEX1392 X, CE 2813 II 1G Ex ia IIC T4 Ga.
- IECEx Flameproof (-IE):IECEx DEK 11.0056X Ex db IIC T6 Gb.
- IECEx Intrinsically Safe (-I/II):IECEx DEK 11.0061X Ex ia IIC T4 Ga.
Key Product Differences
The Series Mark differentiates its three model styles by drive mechanism and application scope:
- Mark 1:Utilizes a magnetic coupling to seal the switch compartment from the atmosphere. Designed for direct or lever drive applications with rotational travel up to 360° (switch outputs) or adjustable span of 50–300°/8.5 revolutions depending on output type.
- Mark 3:Incorporates the same magnetic drive as Mark 1 but is engineered for multi-turn applications, supporting 1 to 25 revolutions (gate valves). Span adjustment ranges from 1.5 to 8.5 revolutions for transmitter outputs.
- Mark 4:Features a through-shaft drive mechanism, offering a cost-effective alternative to the Mark 1 for less demanding applications where magnetic sealing is not required.
Junction packages (Options J1/J2) combine visual indication, solenoids, switches, and transmitters in a single assembly with prelabeled terminal strips. These are available on painted aluminum or stainless steel housings but are excluded from six-switch models and specific switch types (A, D, G, H, T).
アクセサリー
accessories
Clear flexible vinyl tubing, 3/16" ID x 5/16" OD, lengths to 500'; 45 psi maximum pressure @ 73°F.
¥106 / フィート
0 在庫あり
Flexible double column plastic tubing, lt. grey, with red color code stripe, 1/8" ID, lengths to 750 ft, per ft.
¥864 / フィート
0 在庫あり
RoHS 2015/863 - 証明書を見る
UL認定済み
CSA
134-1233132353103204551526789-ABCDGHIMNORSTVW-ADELM-01268-B-C1-C2-FKM-FSL-IE-II-IS-J1-J2-MT-PP-SS-STR-STW-SUB-SV1-SV2
制御の種類
出力データ
スイッチデータ
ja-JP
ja_JP
設定を保存する




