日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Model-VBT-1
振動トランスミッター – 2線ループ電源 – モーター、ポンプ用簡単設置
- 簡単なセットアップと操作コンセプト
- ステンレス鋼ハウジング
- ソフトウェア不要
製品の概要
- 精度 ± 3 %
- 電気接続 M12 4ピン メス
- 電気定格 9.6から32Vdc
- エンクロージャーの定格 IP68, NEMA タイプ 6
- 周波数 10〜1000 Hz
- 材料 316 ステンレススチール
- 取付方向 なし
- 非直線性 スパン値の ±0.25% 未満
- 動作温度(最高) 221 °F
- 動作温度(最低) -22 °F
- プロセス接続サイズ 1/4インチ
- プロセス接続タイプ UNF オス
- 繰り返し精度 < 0.5%
- シリーズID Model-VBT-1
- 重量 0.28 lb
Supported Applications
The Dwyer Model VBT-1 is a vibration transmitter designed to continuously detect vibration in rotating machinery and monitor for unusual operating conditions or potential failure. The unit converts detected vibration into an analog current signal, enabling integration with process control systems without requiring setup software.
Operating Conditions & Performance
The Model VBT-1 operates within a frequency range of 10 to 1000 Hz and provides an output signal of 4-20 mA. The device is rated for operation in any mounting orientation with a temperature limit of -22 to 221°F (-30 to 105°C). Performance specifications include an accuracy of < ±3%, nonlinearity of < ±0.25% of span, and repeatability of < 0.5%. The unit requires a power supply between 9.6-32 VDC for its 2-wire loop powered operation.
Configuration Options
The series features a compact design with an overall length of 2-1/2 [63.25] and a diameter of 7/8 [22.00]. The housing is constructed from 316 SS, providing robust protection in industrial environments.
Connections & Mounting
- Electrical Connection: Standard M12 micro cable connector (Pin 1: L+, Pin 2: 4...20 mA).
- Mechanical Interface: Interchangeable mounting studs available in 1/4"-28 UNF/M8 or 1/4"-28 UNF configurations.
- Process Connection: 1/4-28 UNF thread for installation on machinery surfaces.
Ratings & Compliance
- Enclosure Rating: NEMA 6 (IP68).
- Agency Approval: CE compliant.
- Weight: 0.28 lb (0.125 kg).
Accessories
An optional accessory is available for the series: Model A-283, a 4 wire connector.
Key Product Differences
The primary model in this family is VBT-1. The unit is not field serviceable; if repair is needed, the entire transmitter must be returned to Dwyer for servicing after obtaining a Return Goods Authorization number.