検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-DTFO

液体用可変面積流量計、±2%精度、金属製、3000 psig

  • 耐久性のある金属製構造により優れた信頼性を確保し、最大3000 psig(200 bar)のシステム圧力に耐える強度を持つ
  • ガラス管可変面積流量計とは異なり、破損しにくい構造で長寿命を実現
  • 高温、高振動、衝撃が多い環境で正確に動作
Series-DTFO
販売元 ¥ 348,522
液体用可変面積流量計、±2%精度、金属製、3000 psig Series-DTFO Series-DTFO
loading all models
製品の概要
  • 精度 ± 2 %
  • ダイヤル直径 2.5インチ
  • 動作温度(最高) 200 °F
  • 動作温度(最低) -40 °F
  • 圧力タイプ ゲージ
  • プロセス接続タイプ NPT メス
  • 繰り返し精度 ± 1%
  • スケールメディアキャリブレーション 石油
  • シリーズID Series-DTFO
  • 体積流量、最小 0 GPM

Supported Applications

The Dwyer Series DTFO Variable-Area Flowmeter is designed for measuring oil flow rates in industrial systems. As an in-line mounting device, it provides direct indication of liquid volume with durable metal construction suitable for high-pressure environments.

Operating Conditions & Performance

The series delivers ±2% FS accuracy when calibrated for liquids (oil) and offers a repeatability of ±1% FS. It operates within a process temperature range of -40 to 200°F (-40 to 93°C). Pressure ratings vary by model configuration: DTFO-1B and DTFO-2B models are rated up to 3000 psig (200 bar), while the larger DTFO-3S models support pressures up to 1500 psig (100 bar).

Installation requires horizontal mounting for maximum accuracy, as factory calibration is performed in this orientation. The device utilizes a magnetic coupling system; therefore, external magnetic materials should be kept at least 3 inches (7.6 cm) away from the unit to prevent interference with readings.

Configuration Options

The Series DTFO encompasses multiple flow ranges and connection sizes tailored for oil service:

  • Flow Ranges: Available in increments including 0 to 1, 2, 3, 4, 5, 8, 10, 15, 20, 25, and 30 GPM Oil.
  • Process Connections: Options include 1/4" NPT (DTFO-1B), 1/2" NPT (DTFO-2B), and 1" NPT (DTFO-3S).
  • Housing Materials: Brass bodies are offered for DTFO-1B and DTFO-2B series; Stainless Steel (SS) is used for the DTFO-3S series.
  • Metering Cones: Acetal cones are standard on brass models, while PTFE cones are specified for stainless steel models.

The dial face diameter measures 2.5" (63.5 mm). Wetted materials include a 302 SS spring and range spring, Buna seals, and magnets coated with PTFE.

Key Product Differences

Differences within the series are defined by body material, connection size, and maximum flow capacity:

  • DTFO-1B Series: Features a brass body with 1/4" NPT connections. Flow ranges extend from 0 to 5 GPM Oil.
  • DTFO-2B Series: Utilizes a brass body with 1/2" NPT connections, supporting flow rates up to 10 GPM Oil (e.g., DTFO-2B-8O and higher).
  • DTFO-3S Series: Constructed with stainless steel bodies and 1" NPT connections. This configuration supports the highest ranges in the series, from 0 to 10 GPM up to 0 to 30 GPM Oil.

Note that model numbers for oil service are derived by changing water calibration suffixes (W) to oil designations (O), such as DTFO-1B-4O. The series is not field-serviceable; units requiring repair must be returned to the factory.

ja-JP
ja_JP
設定を保存する