검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

HHF-SD2-Meter

실시간 데이터 로거가 포함된 베인 풍속계

リアルタイムデータロガー付きベーン風速計
재고가 있는 모델
  • 저마찰 볼 베어링 베인
  • K형 또는 J형 열전대 입력
  • 실시간 SD 메모리 카드 데이터 로거
  • 녹색 백라이트 LCD
HHF-SD2-Meter
시작 ¥ 120,221
재고가 있는 모델
リアルタイムデータロガー付きベーン風速計 HHF-SD2-Meter HHF-SD2-Meter
loading all models
제품 개요
  • 정확도 ± 2%
  • 정확도 세부 사항 ± (2% + 40 fpm)
  • 공기 속도, 최소 70 m/h
  • 배터리 크기 및 종류 알칼리성 AAA
  • 데이터 인터페이스 RS232, USB
  • 표시 단위 °C, °F, ft/min, K/h, knot, mile/hr, m/s
  • 디스플레이 유형 Vac라이트 LCD
  • 폼팩터 휴대용
  • 높이 8 in
  • 길이 3 in
  • 작동 습도 0 ~ 85% RH
  • 작동 온도, 최대 50 °C
  • 최소 작동 온도 0 °C
  • 전력 소비 최대 48 mA
  • 프로브 직경 2.83 in
  • 공정 온도, 최대 50 °C
  • 최소 공정 온도 0 °C
  • 샘플링 시간 1초 ~ 3600초
  • 샘플링 시간 사양 참고 샘플링 시간: 자동: 1초에서 3600초 수동: 데이터 로거 버튼을 한 번 누르면 데이터를 한 번 저장합니다
  • 시리즈 ID HHF-SD2-Meter
  • 공급 전력 참고 알칼라인 배터리 또는 하드 듀티 배터리
  • 온도 정확도 ± 0.5 %
  • 온도 센서 유형 열전쌍 타입 K 또는 서미스터
  • 무게 515 g
  • 폭 1.5 in

Supported Applications

The HHF-SD2 is a combination vane anemometer and thermistor thermometer with a built-in real-time SD card data logger. It measures air velocity and air temperature at the same time through a vane probe, and accepts a Type K thermocouple input for additional surface or immersion temperature measurement. Logged data is written directly to an SD memory card as Excel-compatible (.xls) files.

A backlit LCD, automatic temperature compensation, and multiple selectable velocity units make the HHF-SD2 a strong fit for air conditioning and heating systems, ventilation balancing, duct and grille airflow surveys, and general environmental air-movement testing. An optional RS232/USB interface with software lets logs be transferred to a PC for analysis.

The meter comes complete with a vane probe, a hard carrying case, a 2 GB SD card, and a free 1 m (40") Type K insulated beaded-wire thermocouple with subminiature connector and wire spool caddy. It is not designed for and should not be used in human applications.

Operating Conditions & Performance

Air velocity is measured from 0.4 to 25.0 m/s — equivalent to 1.4 to 90.0 km/h, 0.9 to 55.9 mph, 0.8 to 45.6 knot, or 70 to 4921 ft/min — with an accuracy of ±(2% + 0.2 m/s) and a resolution of 0.1 m/s (1 ft/min). Air temperature is reported at 0.1°C (0.1°F) resolution. The vane probe measures 72 mm dia (2.83").

Data-logging and interface behavior includes:

  • Sampling time (Auto): 1 to 3600 seconds, with the display updating at 1 second
  • Memory: SD memory card storing Excel-compatible logs
  • Interface: RS232 and USB (each with optional cable and software)
  • Display: 52 x 38 mm (2.05 x 1.50") LCD with switchable green backlight

The unit runs on 6 "AAA" alkaline or heavy-duty batteries (included) or an optional 9V power adaptor, drawing 15 mA DC without the SD card or backlight and 36 mA with all functions active. It operates from 0 to 50°C (32 to 122°F) at less than 85% RH, weighs 515 g (1.13 lb), and measures 203 L x 76 W x 38 mm D (8 x 3 x 1.50"). The instrument is manufactured to ISO 9001 quality standards.

Configuration Options

Offered as a single model, the HHF-SD2's versatility comes from its selectable measurement scales and its thermocouple input. Velocity can be displayed in m/s, km/h, ft/min, knots, or mile/hr, and temperature reads in °C or °F with automatic temperature compensation.

When a thermocouple is fitted (sold separately), the measuring capability depends on the sensor type. A Type K sensor covers -50 to 1300°C (-58 to 2372°F), while a Type J sensor covers -50 to 1200°C (-58 to 2192°F); both provide 0.1°C resolution and ±(0.4% + 0.5°C) accuracy over their main spans, easing to ±(0.4% + 1°C) at the coldest sub-range.

Key Product Differences

The series consists of one meter supported by a set of interface and replacement accessories:

  • HHF-SD2 — Data-logging vane anemometer with SD card
  • SW-U101-WIN — Software for data logging from meters, with USB and RS232 cables
  • HC-SD — Replacement hard carrying case
  • SC-SD — Soft carrying case
  • ADAPTER-SD — AC adaptor
  • USB-SD — Spare USB cable (SW-U101-WIN software required)
  • RS232-SD — Spare RS232 cable (SW-U101-WIN software required)
  • 2GB-SD — Spare 2 GB SD memory card

Type K and Type J thermocouples are ordered separately to match the temperature task, and a spare beaded-wire thermocouple is available as model SC-GG-K-30-36.

액세서리

accessories

Replacement hard carrying case
78,991원 / 개당
3 재고 있음
So ft carrying case
39,863원 / 개당
7 재고 있음
ko-KR
ja_JP
설정 저장