検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

PFTFS

真空・圧力プレートフィードスルー(ワイヤー・ケーブルシール用)

  • 2000 psi 圧力定格
  • 10-8 Torr 真空定格
  • 銅および熱電対線
  • 8対のワイヤーで8つの熱電対対応
PFTFS
販売元 ¥ 203,350
真空・圧力プレートフィードスルー(ワイヤー・ケーブルシール用) PFTFS PFTFS
loading all models
製品の概要
  • フラットジャムナット六角 35.05 mm
  • フィッティングモデル プレート
  • ホットジャンクション 38.1 mm
  • ジャムナットの厚さ 10.41 mm
  • 加圧時のリーク率 2000 psiで 1 × 10⁻⁶ cc/s
  • 真空下でのリーク率 10⁻⁸ cc He/s未満
  • 長さ 35.56 mm
  • 材料 ステンレス鋼、NBR
  • ワイヤ本数 8
  • Oリング面 R 37.85 mm
  • Oリング、最大 121 mm
  • Oリング、最小 2 mm
  • ガス放出 <0.003% VCM
  • アウトガスに関する注記 <0.003% VCM; <0.34% 重量減少; 試料温度125 °C、冷却面温度25 °C
  • 圧力、最大 2000 psi
  • プロセス接続サイズ 1 1/16インチ
  • プロセス接続タイプ UNF オス
  • プロセス温度(最高) 120 °C
  • プロセス温度(最低) -40 °C
  • シリーズID PFTFS
  • ねじの長さ 19.05 mm
  • 真空等級 1 x 10^-8 Torr
  • 線径 20 AWG

Supported Applications

The Omega PFT Series Vacuum and Pressure Feedthroughs are pre-assembled hermetic units designed to penetrate pressure barriers, vacuum chambers, or bulkheads with electrical conductors while maintaining a tight seal. These feedthroughs eliminate the need to fasten wires to conventional connectors or solder glass-to-metal seals. The series is engineered for high-pressure and high-vacuum applications where reliable sealing of thermocouples or copper wire pairs is required.

Operating Conditions & Performance

The PFTFS Series features a hermetic face seal design with specific performance limits documented in the specification tables. The operating temperature range for the process is -40 to 120°C (-40 to 250°F). Pressure ratings are defined by orientation: the face seal serves as the high-pressure side, while the thread or jam nut represents the low-pressure side.

Key performance specifications include:

  • Maximum Pressure: 2000 psi (138 bar)
  • Vacuum Limit: 1 x 10⁻⁸ torr
  • Leak Rates, Pressure: 1 x 10⁻⁶ cc air/s at 2000 psi; 1 x 10⁻⁷ cc air/s at 29 inHg vacuum
  • Leak Rates, Vacuum: 1 x 10⁻⁸ cc He/s at 15 psi; 1 x 10⁻⁸ cc He/s at 10⁻⁸ torr
  • Out Gassing: <0.003% VCM (Volatile Condensable Materials); <0.34% weight loss (sampled at 125°C, surface at 25°C)

The series is compatible with oils, solvents, refrigerants, water, and non-corrosive gases. Strong acids and bases should be avoided.

Configuration Options

The PFTFS Series supports 8 wire pairs configured for either copper (Cu) or thermocouple types J, E, T, and K. The electrical connection utilizes 20 AWG solid wire with PTFE insulation, rated from -200 to 200°C, with a length of 48 inches on both sides.

Construction materials for the face seal variant include:

  • Housing Material: 300 SS (Stainless Steel)
  • O-Ring: Nitrile O-ring
  • Wire Insulation: PTFE insulation

The series is available with a hermetic face seal connection featuring a jam nut. The thread specification for the PFTFS model is 1/16-12.

Key Product Differences

Differentiation within the broader Omega feedthrough family includes distinct mechanical configurations and pressure ratings:

  • PFTFS Series (Face Seal): Designed for high-pressure applications up to 2000 psi. Features a stainless steel housing, nitrile O-ring seal, and supports 8 wire pairs.
  • PFT2NPT & PFT2CPL Series: Utilize NPT plugs or couples with brass housings (or epoxy resin bodies in some configurations) and are rated for a maximum pressure of 120 PSI. These variants support 1, 2, or 4 wire pairs.
  • PFTCC Series: Multi-pin connectors featuring stainless steel housing designed for different pin counts and materials (e.g., PFTCC-12U).

The PFTFS model specifically distinguishes itself with the face seal design, higher pressure rating of 2000 psi compared to the NPT variants, and a fixed configuration of 8 wire pairs.

ja-JP
ja_JP
設定を保存する