検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-685

真空差圧トランスミッター、調整可能レンジ、調整可能応答

  • スペース、シンプルさ、価値が重要なOEM用途に適したコスト効果の高いコンパクトなデバイス
  • メンテナンス時間を節約するワンボタンゼロ調整
  • 長押しで工場出荷時設定に復元
  • ユーザー調整可能な応答時間により、多くの用途に対応可能
Series-685
販売元 ¥ 23,799
真空差圧トランスミッター、調整可能レンジ、調整可能応答 Series-685 Series-685
loading all models
製品の概要
  • 精度の詳細 ≤ ± 0.5% RSS (BFSL)、± 1 Pa、精度仕様は73 °F(23 °C)での測定に基づく
  • 応用例 クリーンルーム, フィルター監視, 流体計測と制御
  • ケーブルコンジットの長さ 15 mm
  • ケーブル・コンジットの長さに関する注意事項 15 mm(フラット間の寸法)
  • ケーブルコンジット タイプ キャップナット コンジット
  • ダイヤルの深さ 28 mm
  • ダイヤル外径 66 mm
  • 表示タイプ 該当なし
  • エンクロージャーの定格 IP54
  • 長期安定性 ≤ ± 1% RSS/年
  • 材料 ABS、ポリアミド
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
  • 取り付けに関する注意事項 パネルマウント
  • 動作温度(最高) 70 °C
  • 動作温度(最低) -20 °C
  • 圧力タイプ 差分
  • プロセス接続サイズ 6 mm
  • プロセス接続タイプ ステム
  • 相対湿度 0~95% RH、結露しないこと
  • 応答時間 1秒
  • 応答時間の注記 デフォルト:1秒、ユーザー選択可能:200 ms
  • センサータイプ ピエゾ抵抗式圧力センサ
  • シリーズID Series-685
  • 重量 46 g

Supported Applications

The Dwyer Series 685 is a differential pressure and vacuum transmitter designed for building automation systems, clean room monitoring, valve and flap control, filter monitoring, and air flow control. The device measures service media consisting of air and non-corrosive gases.

Operating Conditions & Performance

The Series 685 utilizes a piezoresistive pressure sensor with an accuracy specification of ≤ ±0.5% RSS (BFSL), ±1 Pa, based on measurements at 73°F (23°C). Long-term stability is rated at ≤ ±1% FS per year in the manual and ≤ ±1% RSS per year in the datasheet; both values are documented sources for this series.

Operating ambient temperature limits range from -4 to 158°F (-20 to 70°C), with humidity tolerance up to 0 to 95% RH, non-condensing. The response time is configurable via a jumper: 1 s (default) or 200 ms (user selectable). Pressure ratings vary by model; for example, the 685-03 through 685-13 models list an over-pressure limit of 85 kPa and burst pressure of 135 kPa.

Configuration Options

The series offers a broad selection of measurement ranges to accommodate specific process needs. Available differential pressure spans include:

  • Inches water column: 0 to 1 in w.c., 0 to 2 in w.c., 0 to 3 in w.c., 0 to 5 in w.c., 0 to 10 in w.c., 0 to 15 in w.c., 0 to 20 in w.c., 0 to 25 in w.c., and 0 to 40 in w.c.
  • Pascals: 250 Pa, 750 Pa, 1250 Pa, 2500 Pa, and 5000 Pa.

Electrical output options include a 2-wire configuration providing 4-20 mA or a 3-wire configuration providing 0-10 V. Power supply requirements are 18-30 VDC for the 2-wire version and 18-30 VAC/DC for the 3-wire version.

Physical construction features an ABS housing with dimensions of Ø 66 x 28 mm, weighing 1.6 oz (46 g). The unit carries CE and UKCA compliance marks and is rated IP54. Process connection utilizes a 6 mm hose interface. Electrical connections are available via spring connector for cable and leads up to 1.5 mm² or screw fastening with sheet metal screws, depending on the specific variant documentation.

Additional options include an adjustable pressure range, a single button zero function, and factory restore capability via long button press. A DIN rail adapter kit (Model A-685-DIN) is available for mounting flexibility.

Key Product Differences

The Series 685 model numbering distinguishes pressure ranges and output types. Models ending in -V indicate the 0-10 V output signal, while models without this suffix default to the 4-20 mA output. Specific range codes correspond directly to measurement spans: for instance, code "-3" denotes a 0 to 5 in w.c. range with an over-pressure of 85 kPa and burst pressure of 135 kPa.

Thermal effects vary by model; the additional error with temperature is ±0.7% FS/10°C for models 685-00(-V) and 685-09(-V), while other ranges such as 685-03 through 685-13 list an additional error of ±0.3% FS/10°C.

ja-JP
ja_JP
設定を保存する