日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
PR-15
端子台 RTD (PT100) プローブ
Terminal Block RTD (PT100) Probe- 大きな丸頭ネジで簡単に接続可能
- 低温範囲:-50~250°C(-58~482°F)
- 高温範囲:-50~450°C(-58~842°F)
- 極端な温度範囲:-200~600°C(-328~1112°F)
ぴったりのモデルが見つかりませんか?
カスタムコンフィギュレーターで夢の製品を作りましょう
製品の概要
- 精度 クラス A
- 電気接続 ネジ端子
- エンクロージャーの定格 IP67
- 名目抵抗 100 Ω
- 名目抵抗/カーブノート 0 °C時100 Ωおよび1000 Ω標準; TCR = 0.00385 Ω/Ω/°C標準
- プロセス接続サイズ 該当なし
- RTD タイプ 100 Ω Pt センサー
- シリーズID PR-15
- 耐衝撃性 IEC 60068-2-27; 50g/11ms(15本のプローブを同時に試験)持続時間:1日
- 温度係数 0.00385 Ω/Ω/°C
- 温度係数 注記 α = 0.00385 Ω/Ω/°C
- 温度センサーの種類 RTD
- 熱電対タイプ 該当なし
- 振動 IEC 60068-2-6; 5~2000 Hz スイープレート、1分間に1回アクティブ; スイープサイクル数10、加速度5g(15個のプローブを同時にテスト); 期間:1日
Supported Applications
The Omega PR-15 series consists of RTD terminal block probes designed for temperature measurement in fixtures, pipes, ducts, and other process areas. These probes feature a large terminal block connector with pan head screws to facilitate easy termination and are capable of direct immersion up to the block.
Operating Conditions & Performance
The PR-15 series is offered in three model families—PR-15L (Low), PR-15H (High), and PR-15E (Extreme)—each covering distinct process temperature ranges. The PR-15L supports -50 to 250°C (-58 to 482°F). The PR-15H covers -50 to 450°C (-58 to 842°F), while the PR-15E extends from -200 to 600°C (-328 to 1112°F).
Accuracy specifications vary by model and range. The PR-15L is rated Class A across its full range. For the PR-15H, accuracy is Class A from -50 to 300°C (-58 to 572°F), or else Class B. The PR-15E provides Class A accuracy from -100 to 450°C (-148 to 842°F), or else Class B.
Response time (T90) depends on the probe diameter and model family:
- PR-15L: 1/8" at 2.4 sec, 3/16" at 2.8 sec, 1/4" at 3.25 sec.
- PR-15H: 1/8" at 2.8 sec, 3/16" at 4.11 sec, 1/4" at 5.41 sec.
- PR-15E: 1/8" at 9 sec, 3/16" at 9.8 sec, 1/4" at 10.6 sec.
All models carry an IP67 ingress protection rating and meet vibration standards per IEC 60068-2-6 (5 to 2000 Hz sweep rate; acceleration 5g) and shock standards per IEC 60068-2-27 (50g/11ms).
Configuration Options
The series supports standard probe lengths of 2, 3, 4, 6, 9, 12, 18, and 24 inches. Other lengths may be built using the Omega configurator. Probe diameters are available in 1/8, 3/16, and 1/4 inch.
Key configuration options include:
- Sensor Element: Nominal resistance of 100 Ω or 1000 Ω at 0°C standard with a TCR = 0.00385 Ω/Ω/°C.
- Connection Type: Large terminal block connector fitted with pan screws for electrical termination.
- Process Connection: Compatible with OMEGALOK™ compression fittings (sold separately) to mount the probe into fixtures, pipes, or ducts.
Key Product Differences
The PR-15 series is differentiated by three primary model families based on temperature capability:
- PR-15L (Low): Designed for -50 to 250°C (-58 to 482°F) with Class A accuracy.
- PR-15H (High): Covers -50 to 450°C (-58 to 842°F); offers Class A from -50 to 300°C, otherwise Class B.
- PR-15E (Extreme): Extends range to -200 to 600°C (-328 to 1112°F); provides Class A from -100 to 450°C, otherwise Class B.
PDFとマニュアル