日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
HX94-Srs-Temp-RH-Sig-Cond
温度/相対湿度コンディショナー/トランスミッタープローブ
- ±2% RH 精度 ±0.6 °C 温度精度
- ステンレススチール製 NEMA 4 ハウジング
- ダクトまたは壁面取付用取付金具付属
- 4-20mA または 0-1Vdc 出力オプション
製品の概要
- 精度 ±0.6 °C
- ケーブル長 305 mm
- エンクロージャーの定格 NEMA タイプ 4
- フランジノート 取り外し可能、可変深さ25.4~227 mm(1~9インチ);直径70 mm(2.75インチ)、ダクト穴直径21 mm(0.812インチ)。4つの取り付け穴。直径4 mm(0.156インチ)(#6 シートメタルスクリュー用)、直径51 mm(2.00インチ)の円周上;壁取り付けブラケット付属
- フランジサイズ 227 mm
- 測定タイプ 温度、湿度
- プローブ径 19 mm
- プローブ長 254 mm
- 相対湿度 3~95%
- 相対湿度精度 ± 2% RH
- 繰り返し精度 ± 0.3°C
- シリーズID HX94-Srs-Temp-RH-Sig-Cond
- 電源タイプ DC
- 温度測定(最大) 85 °C
- 温度測定範囲(最小) -20 °C
- 時間定数 (60%応答時)移動空気中(1m/s)で2秒未満、静止空気中で10秒未満
- 時間定数、相対湿度 (25°C、移動空気1m/secでの90%応答時間)20秒未満、10〜90% RH 30秒未満、90〜10% RH
- 重量 198 g
Supported Applications
The Omega HX94 series is a stainless steel relative humidity and temperature probe transmitter designed for duct mount monitoring applications. The unit provides reliable, low-cost measurement of air conditions using solid-state sensors that offer excellent sensitivity, fast response, and stability. It delivers linearized outputs suitable for interfacing with most display and control devices.
Documented media compatibility includes air and non-corrosive gases. The probe is not intended for use in medical applications or on humans.
Operating Conditions & Performance
The HX94 series operates within a process temperature range of -20 to 85°C (4 to 185°F). Relative humidity measurement spans 3 to 95% RH, with an accuracy of ±2% RH and repeatability of ±1% RH. Temperature is measured from 0 to 100°C (32 to 212°F) using a Thin-Film 100 Ω Platinum RTD (DIN 43760), providing an accuracy of ±0.6°C (±1°F) and repeatability of ±0.3°C (±0.5°F).
Response times vary by condition: less than 2 seconds in moving air at 1 m/sec, and less than 10 seconds in still air for temperature response (60% response). For relative humidity, the time constant is less than 20 seconds for a 10 to 90% RH change and less than 30 seconds for a 90 to 10% RH change. The unit requires a power supply of 6 to 30 Vdc with polarity protection.
Configuration Options
The series supports multiple output configurations, housing styles, and connection types:
- Output Signals: Available as HX94C for 4 to 20 mA current output or HX94V for 0 to 1 Vdc voltage output.
- Housing & Enclosure: Features a stainless steel NEMA 4 enclosure with a removable protective sensor filter cap. The probe dimensions are 254 x 19 mm (10 x 0.75") diameter, including a 305 mm (12") cable.
- Process Connections: Configurable for duct mounting via a removable, variable depth flange (adjustable from 25.4 to 227 mm or 1 to 9 inches) requiring a 21 mm (0.812") hole; wall mounting is supported with an included bracket.
- Electrical Connections: Options include a standard 4-pin mating connector accepting 26 to 18 AWG wires, or integrated lead wire versions: HX94CW/VW models feature a 1 m (3') braided and shielded cable with PVC sheathing; HX94CNPT/VNPT models provide a ½" male NPT fitting with a 1 m (3') braided/shielded cable.
- Power & Load: For current output, maximum loop impedance is calculated as Rmax = (power supply voltage - 6 volts) / 0.02 amps. For the 1 to 5 Volt Output version, load resistance should be 250 Ohm.
Key Product Differences
The HX94 series is differentiated by output type and connection method:
- HX94C / HX94V: Standard models with 4 to 20 mA or 0 to 1 Vdc outputs, respectively, utilizing a 4-pin mating connector.
- HX94CW / HX94VW: Models equipped with integrated 1 m (3') lead wires instead of the detachable connector.
- HX94CNPT / HX94VNPT: Variants featuring a ½" male NPT fitting and integrated leads for conduit connection.
The series is RoHS 2 Compliant. Weight with the duct flange is approximately 198 g (7 oz).