日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Model-TBU-00
プロセス制御用温度トランスミッター – 設定可能な4-20 mA出力、マイクロUSB
Temp Transmitter for Process Control – Configurable 4-20 mA Output, Micro-USB- 設定可能な測定範囲
- 標準温度センサー ヘッドエンクロージャ取り付け
- 2線式、3線式、または4線式のPt100接続
製品の概要
- 精度 ± 0.1 %
- 応用例 ボイラー, 石油, 冷蔵, 冷蔵設備
- 電流出力 0~20 mA
- 入力注 熱電対 J、K、R、S、T、N、E、および B;2線式、3線式、または4線式 Pt100 RTD、2線式または3線式 Pt1000 RTD、2線式 NTC サーミスタ、または 0-50 mV 電圧。RTD:238~752°F、熱電対:32~1202°F
- 測定タイプ 熱電対、RTD、サーミスタ、電圧
- ワイヤ本数 2, 3, 4
- 動作温度(最高) 185 °F
- 動作温度(最低) -40 °F
- 出力詳細 リニアライズされた4-20 mA、2線式または20-4 mAループ給電
- 出力信号 電流
- 応答時間 1.6 秒
- 応答時間の注記 1.6秒、標準。
- シリーズID Model-TBU-00
- 電源タイプ DC
- 供給電圧 10から35Vdc
- 温度ドリフト <± 0.16%/25°C
- 温度入力範囲 32Cから1202°F
- 電圧精度 ± 0.13%
- 電圧入力範囲 0から50 mV
- 重量 40 g
Supported Applications
The Dwyer Model TBU-00 is a high precision temperature transmitter designed to mount in most temperature sensor instrument enclosures. It serves as a universal input signal conditioner for process control applications, reducing inventory requirements by supporting multiple sensor types through a single device.
- Temperature measurement using thermocouples (Types J, K, R, S, T, N, E, and B)
- Resistance Temperature Detector (RTD) inputs: 2, 3, or 4 wire Pt100; 2 or 3 wire Pt1000
- NTC thermistor input (2 wire)
- Voltage measurement from 0 to 50 mV
Operating Conditions & Performance
The transmitter operates within an ambient temperature range of -40°F to 185°F (-40 to 85°C). It requires a power supply between 10 and 35 VDC. The typical response time is 1.6 s, with a temperature drift specification of < ±0.16% / 25°C.
Accuracy varies by input type as documented in the series specifications:
- Voltage (0 to 50 mV): ±0.1% FS
- Thermocouples J, K, R/S, T, N, E, B: ±0.1% FS
- Pt100/Pt1000 RTDs: ±0.13% FS
- NTC Thermistor: ±0.3°C
Configuration Options
The Model TBU-00 offers configurable parameters to match specific sensor and process requirements.
Sensor Input Configuration
The universal input accepts the following configurations:
- Thermocouples: J, K, R, S, T, N, E, B
- Pt100 RTD: 2, 3, or 4 wire connections
- Pt1000 RTD: 2 or 3 wire connections
- NTC Thermistor: 2 wire connection
- Voltage: 0 to 50 mV range
Output and Power Options
The output signal is configurable via software:
- Linearized 4-20 mA (direct acting)
- Reverse 20-4 mA loop powered configuration
- Transmitter type: 2, 3, or 4 wire operation
Configuration and Physical Attributes
The device features a micro-USB port for easy configuration and calibration in the lab or field. The physical dimensions are 13/16 [20.5] height by 1-23/32 [43.5] diameter, with a weight of 1.4 oz (40 g). It carries CE approval.
Key Product Differences
The Model TBU-00 is factory set to Pt100 Ω RTD, 0 to 100°C, direct acting by default. Users can reconfigure the input type, measurement range, and calibration using configuration software connected via the micro-USB port.
PDFとマニュアル
ソフトウェアとドライバー


