日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
SPHT
表面プローブ 経済的 高温用
표면 프로브 경제형 고온용
在庫のあるモデル
- J, K 또는 E 표면 프로브 사용 가능
- 150 mm(6') 및 300 mm(12') 길이 표면 프로브 사용 가능
- 220ºC(428ºF)까지 허용되는 몰딩 유틸리티 핸들
- 1.5 m(5')까지 확장 가능한 수축 케이블
製品の概要
- 전기 연결 Sub-D 수형 미니어처 커넥터
- 손잡이 온도, 최대치(Max) 220 °C
- 최소 핸들 온도 0 °C
- 프로브 직경 0 in
- 프로브 유형 휴대용 표면
- 공정 온도, 최대 650 °C
- 최소 공정 온도 0 °C
- 시리즈 ID SPHT
- 보호관 재질 304 스테인리스 스틸
- 온도 프로브 형식 표면 탐침
- 온도 센서 유형 열전쌍
Supported Applications
The Omega SPHT Series consists of economical, high-temperature surface probes designed for measuring surface temperature. These thermocouple-based sensors are configured with a ceramic tip and spring-loaded contacts to ensure reliable contact on the target material.
- Type J, K, or E calibrations available
- Standard Limits of Error compliance across all models in this series
Operating Conditions & Performance
The SPHT Series is engineered for high-temperature surface measurements with a ceramic tip rated to 650ºC (1200ºF). The molded utility handle provides thermal protection, rated to 220ºC (428ºF), allowing safe handling during operation. Electrical connectivity is provided via a retractable cable that expands to 1.5 m (5′) terminating in a subminiature connector for use with handheld thermometers.
Key Performance Parameters
- Process Temperature: Ceramic tip rated to 650ºC (1200ºF)
- Ambient/Handle Rating: Molded utility handle rated to 220ºC (428ºF)
- Accuracy Class: Standard Limits of Error
Physical Dimensions
The series offers two primary probe lengths with corresponding sheath diameters. The standard configuration includes a handle section length of 136.5 mm (5 3⁄8″) and a surface tip diameter of 9.52 mm (3⁄8″). For right-angle models, the vertical leg measures 69.8 mm (2 3⁄4″).
Configuration Options
The SPHT Series supports multiple configurations to accommodate different measurement geometries and calibration requirements.
Calibration Options
- Type J surface probe
- Type K surface probe
- Type E surface probe
Probe Lengths & Sheath Sizes
- 150 mm (6″) length with 3.0 mm (1⁄8″) sheath diameter
- 300 mm (12″) length with 6.0 mm (1⁄4″) sheath diameter
Housing & Connection Features
- Molded utility handle rated to 220ºC (428ºF)
- Retractable cable expands to 1.5 m (5′)
- Subminiature connector for handheld thermometers
- Included plastic cap for protection of the surface element
Special Configurations
A 90° right angle probe is available by ordering models with the -RA suffix. The sheath material is specified as 304 SS OMEGACLAD®.
Key Product Differences
The SPHT Series distinguishes variants primarily through calibration type, physical dimensions, and geometric orientation.
- Calibration: Models are designated by J, K, or E in the part number to indicate Type J, Type K, or Type E surface probes respectively.
- Length & Diameter: The numeric suffix '6' denotes a 150 mm (6″) probe with a 3.0 mm (1⁄8″) sheath diameter; the suffix '12' denotes a 300 mm (12″) probe with a 6.0 mm (1⁄4″) sheath diameter.
- Orientation: Models ending in -RA feature a 90° right angle surface probe design, while standard models are straight probes.
The SPHT-K-6 model is included at no additional cost with specific infrared thermometers: OS532E, OS533E, OS534E, OS534E-CF, and OS533E-CF.