検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

RTD-2-F3102

スタイル3 RTDエレメント、4線式

在庫のあるモデル
  • 100 Ω, 0.00385 알파 요소로 제작
  • 클래스 A 허용오차 (+/- 0.06Ω, 0° C 기준)
  • 2선, 3선 또는 4선 용접 리드 구성
  • 26 게이지, 36피트 길이의 연선 니켈 도금 구리 리드
RTD-2-F3102
販売元 ¥ 18,697
在庫のあるモデル
スタイル3 RTDエレメント、4線式 RTD-2-F3102 RTD-2-F3102
loading all models
製品の概要
  • 명목상 저항 100 Ω
  • 최소 공정 온도 -30 °C
  • 감지 요소 4 x 5mm 박막 100 Ω RTD
  • 시리즈 ID RTD-2-F3102
  • 온도 센서 유형 RTD
  • 와이어 게이지 26 AWG
  • 와이어 유형 연선

Supported Applications

The Omega STYLE 3 RTD ELEMENT, 4 WIRES series consists of fast-response exposed RTD elements with lead wires designed for temperature measurement. These sensors feature thermal response times less than 75 milliseconds in water flowing at 3 feet per second and are configured to connect directly to most handheld instruments.

Operating Conditions & Performance

The series supports two primary operating ranges based on the insulation and potting material selected. Models with PFA lead wire and epoxy potting operate up to 230°C (450°F). Models utilizing fiberglass-insulated cable with ceramic potting are rated for temperatures up to 480°C (900°F).

Accuracy options include high-accuracy Class 'A' 100 Ω DIN Platinum elements as standard, along with ultra-precise accuracies of ½ DIN and ⅟₁₀ DIN. Economical Class 'B' accuracy is also available for lower-cost applications.

  • Class 'A': ±0.15°C @ 0°C (IEC CLASS A)
  • ½ DIN: ±0.04 Ω
  • ⅟₁₀ DIN: ±0.012 Ω
  • Class 'B': ±0.12 Ω

Note that ½ and ⅟₁₀ DIN accuracies are only available with wire-wound elements (specifically 1PT100K2515 and 1PT100KN2528) and require 4-wire construction.

Configuration Options

The series offers extensive configuration options for lead count, cable length, insulation type, and termination style to accommodate diverse installation requirements.

  • Sensor Elements: F3105 (2 x 2 mm), F3102 (2 x 4 mm), 1PT100KN2528, and 1PT100K2515 wire-wound elements.
  • Lead Wire Configuration: Available in 2-, 3-, or 4-wire configurations with stripped leads as standard. Cable lengths are customizable; the model number digit '36' represents a specific length and can be changed to other values for additional cost per foot.
  • Insulation & Potting: PFA insulation with epoxy potting (up to 230°C) or fiberglass insulation with ceramic potting (up to 480°C / 900°F).
  • Bare Wire Option: To order sensors for use up to 600°C (1112°F), replace the 'T' or 'G' suffix in the model number with 'B'. These configurations feature bare wires and connections.

Termination & Accessories

Sensors can be ordered with various termination options, including miniature connectors (MTP-U-M), heavy-duty connectors (OTP-U-M), TA3F/TA4F connectors, or a 4 to 20 mA transmitter (SPRTX). The series is compatible with the HH804U complete high accuracy RTD thermometer featuring 2 DIN connectors.

Key Product Differences

The primary distinction within this series lies in the element size and insulation material, which dictate the maximum operating temperature. The F3105 (2 x 2 mm) and F3102 (2 x 4 mm) elements are available with either PFA/epoxy or fiberglass/ceramic construction depending on the required thermal limit.

Wire-wound elements, specifically models 1PT100K2515 and 1PT100KN2528, differ from standard film elements by supporting higher accuracy classes (½ DIN and ⅟₁₀ DIN) but are restricted to 4-wire configurations. Additionally, the series offers variations in lead count (2-, 3-, or 4-wire), which affects compatibility with specific instrumentation and measurement techniques.

RTD-123-F3102-364872961201Mカスタム-TGB-B-MTP-OTP-TA4F-LUG
ワイヤスタイル
リード線の長さ
リード線絶縁タイプ
端子またはパック
"
ja-JP
ja_JP
設定を保存する