検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

DPS20-Series

ひずみ計 - 6桁表示、3リレー出力付き

  • 高速アクセスメニュー - フロントパネル操作
  • 設定可能なタレ機能
  • オプションのリレーおよびアナログ出力モデル
  • 望ましくないタレを防ぐための最大タレ値の設定
  • 独立スケーリング
  • オプションのModbus RTU RS-485モデル
  • 5段階の明るさ調整
  • パスワード保護
DPS20-Series
販売元 ¥ 54,868
ひずみ計 - 6桁表示、3リレー出力付き DPS20-Series DPS20-Series
loading all models
製品の概要
  • 精度 ± 0.05 %
  • 1秒あたりの取得回数 16、50、または 60 回/秒(設定可能)
  • カットアウト寸法 1.74 x 3.63 インチ
  • 表示に関する注意事項 桁数: 6; 読み取り値: 999999/-199999; 小数点: 設定可能; LED色: 赤色桁; 高さ: 14mm (0.55’’)
  • 表示タイプ LED
  • 電気接続 ネジ端子
  • エンクロージャーの定格 IP65, NEMA タイプ 4
  • 外部連絡先 設定可能な機能
  • フォームファクター 1/8 DIN
  • 高さ 1.89 in
  • インピーダンス入力 20 MΩ
  • 入力構成 前面キーパッド
  • 入力範囲注記 100mV、30mV、20mV、15mV、10mV、5mV
  • 入力タイプ ひずみ
  • 長さ 3.58 in
  • ロードセルタイプ 1 mV/V、2 mV/V、3 mV/V
  • 測定タイプ ひずみ
  • 取付 パネル
  • セル数 1Cから8個のロードセル(5Vdc)および1Cから4個のロードセル(10Vdc)
  • 桁数 6
  • 入力数 1
  • ワイヤ本数 4, 6
  • 動作温度(最高) 50 °C
  • 動作温度(最低) 0 °C
  • 消費電力 1.5 W 4 W
  • 消費電力に関する注意事項 <1.5W(メーターのみ)および<4.0W(出力オプション付きメーター)
  • 電源線 最大 2.5mm²
  • サンプリングレート 13 Hz (13 回/秒)
  • センサー励起 5 Vdc または 10 Vdc(設定可能)、最大励起電流:140 mA、入力時最大 Vdc:± 30 Vdc
  • シリーズID DPS20-Series
  • ステップ応答 17、20、または63 ms(信号の0%~99%)
  • ステップ応答ノート 17、20、または63 mSec(設定可能)
  • 最大保管温度 70 °C
  • 保管温度(最低) -20 °C
  • 電源タイプ AC / DC
  • 熱安定性 50 ppm/°C
  • 重量 150 g
  • 幅 3.48 in

Supported Applications

The Omega DPS20 Series is a digital panel meter designed for load cell signal measurement. The series supports industrial applications including assembly lines, control panels, and laboratories where high-performance weight monitoring is required.

Operating Conditions & Performance

The DPS20 features a 6-digit red LED display with 14 mm digit height and provides readings from -199999 to 999999. Accuracy at 25°C is specified as 0.05% FS, with thermal stability of 50 ppm/°C. The meter accepts excitation voltage configurable to +5 Vdc or +10 Vdc and supports up to eight standard 350 Ohms cells (at 5Vdc) or four load cells (at 10Vdc). It accommodates 4-wire and 6-wire cell configurations with internal signal ranges of 100mV, 30mV, 20mV, 15mV, 10mV, and 5mV.

Performance includes configurable acquisition speeds of 16, 50, or 60 acq./sec. Step response (0% to 99% of signal) is selectable at 17, 20, or 63 mSec. The front protection rating is NEMA 4 (IP65). Operating temperature ranges from 0 to 50°C (32 to 122°F), and storage temperature spans -20 to 70°C (-4 to 158°F).

Configuration Options

The series offers configurable output options, power supplies, and mounting dimensions. Key capabilities include:

  • Power Supply Options: High voltage (HV) models accept 85 to 265 Vac/dc with isolated 2500 Veff; Low voltage (LV) models accept 11 to 60 Vdc and 24/48 Vac with isolated 1500 Veff.
  • Output Signals: Configurable for up to three relay outputs, one or more isolated analog outputs (4/20 mA or 0/10 Vdc), Modbus RTU communications via RS-485, transistor outputs, and SSR control outputs. Analog output accuracy is 0.1% FS with 1000 Vdc isolation.
  • Relay Specifications: Relay modules provide three contacts (Com, NO, NC) with a maximum current of 8A resistive load and maximum voltage of 250 Vac continuous. Isolation is rated at 3500 Veff.
  • Physical Dimensions: The unit measures 96 x 48 mm (1/8 DIN) front size with a depth of 91 mm including terminals. Panel cut-out dimensions are 92x44 mm, and weight is less than 150 gr (5.3 oz).
  • Connections: Signal terminals use plug-in screw terminals with 3.81 mm pitch; power and output options utilize plug-in screw terminals with 5.08 mm pitch.

Key Product Differences

Variants within the DPS20 Series are distinguished by their power supply class (HV or LV) and the combination of output modules installed at positions Opt.1, Opt.2, and Opt.3:

  • HV Models: Designed for 85 to 265 Vac/dc input.
  • Lv Models: Designed for 11/60 Vdc and 24/48 Vac input.
  • Output Configurations: Available with no output, single or multiple relay outputs (R1), analog outputs (AO), Modbus RTU serial output (RTU), or combinations thereof. For example, the DPS20-HV-R1-R1-RTU includes two relay outputs and one Modbus RTU output.
  • Display Indicators: Front LEDs 'A' and 'B' indicate gross weight, actual tare value, net weight, units ('stock units'), or activated 'tare' function based on configuration states (on/off/fast flash).
ja-JP
ja_JP
設定を保存する