検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SCH-Series

ステンレススチールカートリッジヒーター 外径0.13-1.25インチ 長さ1-36インチ

この部品は一時的に利用できません。代替品としてCSS-CSHをご覧ください。

  • 優れた熱伝導性を持つ304ステンレス鋼シース
  • シース温度最大677°C(1250°F)
  • 直径1/8インチから1 1/4インチまで
  • 長さ1インチから36インチ(2.5~91 cm)まで
SCH-Series
販売元 ¥ 9,100
ステンレススチールカートリッジヒーター 外径0.13-1.25インチ 長さ1-36インチ SCH-Series SCH-Series
loading all models
製品の概要
  • 電気接続 被覆除去済みリード線
  • リード線材質 ガラス繊維
  • シリーズID SCH-Series
  • シース材質 304ステンレス鋼
  • シースの最高温度 677 °C

Supported Applications

The Omega SCH series consists of stainless steel cartridge heaters designed to provide maximum wattage in limited spaces. The product overview identifies specific applications for this heater, including packaging, rubber molding, form fill and sealing, platen heating, HVAC compressors, die casting, hot melt adhesives, food manufacturing, and extrusion.

Operating Conditions & Performance

The SCH series features a 304 Stainless Steel sheath selected for uniform heat distribution and good thermal conductivity. The documented maximum sheath temperature is 677°C (1250°F). Operating voltage options are listed as 120VAC or 240 VAC.

Performance ranges across the series include:

  • Diameter Range: 0.125 to 1.25 in (1/8 to 1 1/4 in)
  • Length Range: 1.0 to 36.0 inches
  • Wattage Range: 10 to 1200 W

The series is offered with high- and low-density options.

Configuration Options

Model numbers follow the format: SCH - Diameter - Length - Wattage - Termination - Lead Length - Voltage. The series supports a wide configuration envelope for mounting and electrical connections.

Diameter Options:

  • 0125 (1/8 in)
  • 0187 (3/16 in)
  • 0250 (1/4 in)
  • 0375 (3/8 in)
  • 0500 (1/2 in)
  • 0625 (5/8 in)
  • 0750 (3/4 in)
  • 1000 (1 in)
  • 1250 (1 1/4 in)

Termination Types:

  • N: Stripped leads
  • B: Ceramic bead insulation
  • BL: Ceramic bead and leads
  • C1B: Straight armored cable, stainless steel
  • C2B: Right-angle armored cable, stainless steel
  • R1A: Right angle leads, copper elbow
  • W: Straight wire braided leads
  • M2A: Potted and sealed, fiberglass wires externally connected
  • M2E: Potted and sealed, fiberglass wires internally connected
  • W1A: Right-angle braided leads, cement potting, no lead wire and disc
  • W1B: Right angle braided leads, cement potting, with lead wire and disc
  • C3B: Right angle armored cable, cement potting and silicone varnish with lead end disc. Stainless steel cable
  • R2B: Right angle leads, cement potting, welded lead end disc
  • R3: Angled sheath extension (cement potting only)
  • GL: Ground lead sheath
  • M2C: High temperature epoxy potting, PFA wires internally connected

Lead Wire and Voltage:

  • Standard Lead Length is 12 inches; longer lengths are available.
  • Lead wire material is Fiberglass Insulated Lead Wire.
  • Voltage codes: 1 (120 Volts AC), 2 (240 Volts AC).

A variety of cold-end terminations, mounting and threading options are available for maximum versatility. Non-standard wattage options are available on request.

Key Product Differences

The SCH series is defined by the 304 Stainless Steel sheath material. Distinctions between variants are established through specific diameter codes (e.g., 0125 to 1250), length increments, wattage ratings up to 1200 W, and termination styles ranging from stripped leads to armored cables and potted configurations.

ja-JP
ja_JP
設定を保存する