日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
PX4600
トランジスタケース内ソリッドステート絶縁トランスデューサー
- 小型、軽量、OEMパッケージ
- ほとんどの工業用液体および油に適した固体媒体絶縁
- -55~121°Cの広範囲温度補償により、温度変化に対して高い安定性を実現
- 100MΩまでの電気絶縁により長期信頼性を保証
製品の概要
- 精度 ± 0.25 %
- 精度クラス 0.1% ~ 0.25%
- 精度の詳細 ± 0.25% FSO 結合線形性、ヒステリシス、および再現性
- 破裂圧力 3倍フルスケール
- バースト圧力に関する注意事項 定格圧力300%、最大500 psi
- 補償温度、最大 121 °C
- 補償温度、最小 -55 °C
- 電気接続 T-08
- 電気出力 3 mV/V
- 電気出力に関する注意事項 30 mV ± 10%@ 10 Vdc
- 入力抵抗 2000 Ω
- 絶縁抵抗 100 MΩ @ 50 Vdc
- 材料、湿潤 エポキシ, コバール, ニトリド, ポリイミド
- MTBF 100,000 時間
- 動作温度(最高) 150 °C
- 動作温度(最低) -55 °C
- 出力抵抗 1000~1500 Ω
- 出力信号 ミリボルト
- プロセス接続サイズ 3/16 インチ
- プロセス接続タイプ ステム
- 耐圧力 2.5倍フルスケール
- プルーフプレッシャーノート 定格圧力の250%、最大500 psiで、指定された許容範囲を超える性能変化は生じません
- 検知素子 4アーム式ひずみゲージブリッジ
- センシング要素の注記 4アクティブアームブリッジ、マイクロマシン加工された拡散シリコンダイアフラムセンサーおよび薄膜媒体と誘電絶縁バリアを使用。
- シリーズID PX4600
- 耐衝撃性 100 g、11 ms、損傷のない半正弦波
- 供給電圧 10 Vdc
- スパン誤差に対する熱的影響、最大値 ± 0.036% FSO/°C
- ゼロ点誤差に対する熱的影響、最大 ± 0.036% FSO/°C, ± 0.036% FSO/°C
- 振動 10Hzから2000Hzの35 gピーク正弦振動(½インチD.A.)において、出力は15 psiレンジで0.04% FSO/gを超えず、100 psi以上では0.005% FSO/gに低減します。固有周波数:100 psiレンジで>35 kHz
- 重量 5 g
- ゼロ点/バランス誤差 0 mV ± 5% FSO
Supported Applications
The Omega PX4600 series is a family of solid-state, dielectrically isolated pressure transducers housed in a TO-8 transistor case for OEM and printed circuit board mounting. The sensing element is a micro-machined diffused silicon diaphragm with a 4 active arm bridge, giving accurate, highly reliable pressure measurement in a very small, light package.
Because of their small size and light weight, these transducers are well suited to demanding vibration and shock environments, including fixed wing aircraft service, and they are compatible with most industrial fluids and oils. Both gage and absolute pressure versions are offered, so the series can be built into instruments, test equipment, and embedded OEM designs.
Operating Conditions & Performance
The PX4600 series covers standard ranges of 0 to 15, 20, 50, 100, 200, and 300 psi in both gage and absolute pressure, with corresponding metric ranges from 0 to 1.0 bar up to 0 to 20.7 bar. Combined accuracy is ±0.25% FSO, covering linearity, hysteresis, and repeatability.
Each transducer is excited at 10 Vdc and provides a nominal output of 30 mV ±10% @ 10 Vdc, with a zero balance of 0 mV ± 5% FSO. Input resistance is 2000 Ω minimum and output resistance is 1000 to 1500 Ω.
- Operating temperature: -55 to 150 °C (-65 to 300 °F).
- Compensated temperature: -55 to 121 °C (-65 to 250 °F).
- Proof pressure: 250% of rated pressure, up to 500 psi max.
- Burst pressure: 300% of rated pressure, up to 500 psi max.
- Shock: 100 g, 11 ms half sine wave without damage.
- Weight: 5 g (0.2 oz) maximum.
Under 35 g peak sinusoidal vibration from 10 Hz to 2000 Hz, output does not exceed 0.04% FSO/g for the 15 psi range, decreasing to 0.005% FSO/g for the 100 psi range and above. Wetted parts are Nitride, Pyrex glass, epoxy, and Kovar, and the units are built to NIST Standard and are CE marked.
Configuration Options
All PX4600 models share the same solid-state silicon sensing element, TO-8 transistor case, 12-pin connector, 10 Vdc excitation, and 30 mV ±10% output. What changes from model to model is the pressure range and whether the transducer reads gage or absolute pressure.
Pressure Range
Standard ranges span 0 to 15 psi through 0 to 300 psi, with the smaller ranges suited to low-pressure sensing and the higher ranges to broader spans. The same span is expressed in metric form from 0 to 1.0 bar through 0 to 20.7 bar.
Pressure Type
Both gage and absolute versions are available for the offered ranges, letting the same mechanical package serve applications referenced either to ambient or to a sealed vacuum reference.
Physical Package
Each unit measures 15.2 mm (0.60 in) in diameter with a 19.1 mm (0.75 in) stem length and a 12.7 mm (0.50 in) body height, and terminates in a 12-pin connector.
Key Product Differences
The catalog number is built from the PX4600 base followed by the pressure range and the pressure type. For example, PX4600-015AV and PX4600-015GV share the 0 to 15 psi range while differing in pressure type.
Representative models across the lineup include:
- PX4600-015GV and PX4600-015AV — 0 to 15 psi.
- PX4600-100AV and PX4600-100GV — 0 to 100 psi.
- PX4600-300GV and PX4600-300AV — 0 to 300 psi.