検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SP-001-2-Series

スマートIRセンサー -70 °C~380 °C 温度

This item has been discontinued. We are retiring the Omega Link product line and transitioning to SensoScientific — the industry’s most advanced wireless monitoring platform, now a key part of our unified DwyerOmega portfolio.

SP-001-2-Series
販売元 ¥ 36,646
スマートIRセンサー -70 °C~380 °C 温度 SP-001-2-Series SP-001-2-Series
loading all models
製品の概要
  • 精度 ± 4 °C (± 7.2 °F)
  • 精度の詳細 周囲温度0~50 °C(32~122 °F)での温度精度:1 °C(1.8 °F)または測定値の1%のいずれか大きい方 周囲動作範囲全体での精度:4 °C(7.2 °F)または測定値の3%のいずれか大きい方
  • 承認 CE、UKCA
  • コンフィグレーション SYNC構成ソフトウェアで設定可能
  • 直径 12 mm
  • 放射率、最大 0.01 から 1.00
  • 筐体材質 ステンレス鋼
  • エンクロージャーの定格 IP67, NEMA タイプ 6
  • 長さ 67 mm
  • 測定タイプ 温度
  • チャンネル数 2
  • 動作温度(最高) 85 °C
  • 動作温度(最低) -40 °C
  • プロセス接続タイプ 内部
  • プロセス温度(最高) 380 °C
  • プロセス温度(最低) -70 °C
  • 相対湿度 0~95% RH
  • 繰り返し精度 温度: 1 °C
  • 再現性の注記 温度:1 °C(1.8 °F)または読み取り値の1%
  • シリーズID SP-001-2-Series
  • ソフトウェア OEGおよびSYNC構成ソフトウェア対応
  • スペクトル応答、最大 14 µm
  • スペクトル応答、最小 5.5 µm
  • 電源タイプ DC
  • 供給電圧 3.3 Vdc
  • 温度応答時間 1秒
  • ねじ径 12 mm
  • ねじの長さ 33.5 mm
  • 振動 10 Hz から 500 Hz までの 10 Gs
  • 重量 35 g

Supported Applications

The Omega SP-001/SP-002 Smart IR Sensor is an ultra-miniature, non-contact infrared temperature probe for surface measurement from -70 to 380°C (-94 to 716°F). As part of the Omega Link ecosystem, it targets non-contact monitoring of moving, hard-to-reach, or otherwise inaccessible surfaces in data-acquisition, IIoT, and wireless sensing deployments.

It measures infrared surface temperature across a wide range of materials, including paper, thick plastics, rubber, food and organic materials, painted metals, and dusty, rusty, or oily surfaces.

Operating Conditions & Performance

The sensor reads infrared surface temperature from -70 to 380°C (-94 to 716°F) with a 1 second response time. Accuracy is 1°C (1.8°F) or 1% of reading, whichever is greater, over a 0 to 50°C ambient, and 4°C (7.2°F) or 3% of reading across the entire ambient range; repeatability is 1°C (1.8°F) or 1% of reading.

  • Power: 3.3 VDC, 0.05 W maximum.
  • Digital interface: I2C (SCL/SDA), two discrete I/O signals (DIO 0, DIO 1), and an interrupt (INTR), through a modular M12 8-pin male connector.
  • Ambient range: -40 to 85°C (-40 to 185°F); humidity less than 95% RH, non-condensing.
  • Enclosure and durability: stainless steel housing rated NEMA 6 / IP67, with vibration tolerance of 10 Gs from 10 Hz to 500 Hz.

The probe measures 12 mm in diameter and 67 mm in length, and weighs 35 g (1.2 oz). The series carries CE and UKCA approvals.

Configuration Options

Model configuration follows SP-00x-<Discrete I/O Pins>, where the base number sets the field of view (FOV) and the suffix sets the discrete I/O pin configuration:

  • SP-001 vs SP-002: differ by field of view.
  • -0 vs -1 suffix: differ by discrete I/O pin configuration.

All variants share the same -70 to 380°C measurement range, stainless steel M12 form factor, and Omega Link smart-interface capability, and can act as an edge controller with autonomous decision-making when paired with an Omega Link wireless gateway.

Key Product Differences

The series is offered in four models:

  • SP-001-0
  • SP-001-1
  • SP-002-0
  • SP-002-1

Compatible accessories include M12 cordsets and splitters (for example DM12CAB-8-1, DM12CAB-8-3, and DM12CAB-8-5, and the M12.8-T-SPLIT) and the SP-001-MB mounting bracket.

アクセサリー

cables

M12-8 pin Straight Plug Field install connector with screw terminals
¥3,807 / 各
0 在庫あり
Dual M12 Cables for Sensors and Transmitters
¥10,363 / 各
0 在庫あり
Dual M12 Cables for Sensors and Transmitters
102,706원 / 各
3 在庫あり

installation hardware

Mounting Bracket for SP001 & SP002
/ 개당
17 在庫あり

signal conditioners

Modbus compatible USB Serial to Smart Probe Interface
121,178원 / 개당
9 在庫あり
ja-JP
ja_JP
設定を保存する