한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
OM-SGD-SERIES
スマートグラフィックス プロセスメーター、カラーTFTディスプレイ
- カラーTFTディスプレイ—3つの画面サイズから選択可能
- USB経由でソフトウェア設定可能—複数の表示構成を含み、プログラミングを開始
- パネルマウント
- 電圧または電流入力モデル
제품 개요
- 精度 ± 0.05 %
- 精度の詳細 典型値0.05%、最大値0.1%
- 制御出力 2 オープンコレクター
- 表示タイプ TFT
- 表示タイプ 注 カラーTFT、320 x 240ピクセル、16ビットカラー
- 電気接続 ネジ端子
- 直線性 最大±1カウント(ユーザー校正設定による)
- 動作温度(最高) 40 °C
- 動作温度(最低) 0 °C
- 出力詳細 2つのオープンコレクタ出力(それぞれ最大10 mAのシンク)
- サンプリングレート 3 Hz (3 更新/秒)
- シリーズID OM-SGD-SERIES
- ソフトウェア Windows® XP/Vista/7/8
- 電源注記 4~30 Vdc(外部電源またはUSB接続経由、USB 1.0および2.0対応)
- 電源タイプ DC
- 供給電圧 4から30Vdc
Supported Applications
The Omega OM-SGD Series comprises smart graphics process meters featuring color TFT displays designed for panel mounting. These devices accept voltage or current inputs to monitor and display process variables with customizable graphical interfaces. Users configure the meter via wizard-based software compatible with Windows® XP (SP3), Vista, 7, and 8, selecting from over 40 standard display configurations. The configuration allows customization of colors, text labels, input scaling, and units before uploading settings to the unit through a USB interface.
Operating Conditions & Performance
The series operates within an ambient temperature range of 0 to 40°C (32 to 104°F). Voltage input models accept two independent channels programmable from eight available ranges: 0 to 1.25 V, 0 to 2.5 V, 0 to 4 V, 0 to 5 V, 0 to 8 V, 0 to 10 V, 0 to 20 V, and 0 to 40 V. These inputs are single-ended with a shared common ground. Current input models support typical operation at 4 to 20 mA, with a minimum of 0 mA and maximum of 50 mA; loop voltage drop for these models is typically 0.4 to 2.0V (min 0V, max 5.0V).
Performance specifications include an accuracy of 0.05% typical and 0.1% max, with linearity within ±1 count max depending on user calibration settings. The display resolution varies by range from 0.3 mV to 9.8 mV for voltage inputs. The sample rate is a maximum of 3 samples/sec.
Configuration Options
The OM-SGD Series offers configurable dimensions, input types, and environmental protection levels across its model lineup:
- Display Sizes: Available in 2.4", 2.8", and 3.5" color TFT screens with a resolution of 320 x 240 pixels (16-bit color).
- Housing & Enclosure: Standard models feature panel mounting clips. Waterproof variants (OM-SGD-24-M-IP, OM-SGD-24-M-IP420) include a NEMA 6 (IP67) rating and a 32 mm mounting nut.
- Input Types: Models are designated for Voltage input (-M suffix) or Current input (-420 suffix).
- Outputs: All models provide 2 open-collector outputs capable of sinking up to 10 mA max each.
- Power Supply: Operates on 4 to 30 Vdc from an external supply or via USB connection (compatible with USB 1.0 and 2.0).
Dimensions vary by model: the OM-SGD-24-M series measures 76.5 x 46.5 x 38.0 mm (3.01 x 1.8 x 1.5 in), while waterproof versions measure 85.8 x 62.7 x 40.0 mm (3.4 x 2.5 x 1.6 in). The OM-SGD-28-M series measures 89.5 x 56.8 x 43.2 mm (3.5 x 2.2 x 1.7 in), and the OM-SGD-35-M series measures 96.0 x 78.5 x 52.7 mm (3.8 x 3.1 x 2.1 in).
Key Product Differences
The series distinguishes between standard and waterproof housings, as well as voltage versus current input capabilities:
- Voltage Input Models (OM-SGD-XX-M): Accept 0 to 40 V ranges. Electrical connections utilize screw terminals.
- Current Input Models (OM-SGD-XX-M-420): Optimized for 4 to 20 mA signals with a loop voltage drop of up to 5.0V max. Connections use screw terminals except on waterproof variants.
- Waterproof Variants (-IP Suffix): Models OM-SGD-24-M-IP and OM-SGD-24-M-IP420 feature a NEMA 6 (IP67) enclosure with a 12-way connection instead of screw terminals. These models include the mounting nut for panel installation.
- Thermocouple Compatibility: The optional OM-SGD-ADPT-TC module enables Type J, K, or T thermocouple measurement but is not compatible with waterproof models (OM-SGD-24-M-IP and OM-SGD-24-M-IP420).
Accessories include the right-angle waterproof connector cable (OM-CABLE-IP-12W-RA, 2 m length) for IP-rated units and a USB interface cable (OM-CABLE-USB-A-MF, 0.45 m type A to mini B) required for programming.
PDF 및 매뉴얼
소프트웨어 및 드라이버