日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-3500
スマート差圧トランスミッター、HART®、ATEX/IECEX、カスタマイズ可能
- 高精度(±0.075% FS)
- レンジアビリティ(最大25:1)
- ゼロ/スパンボタンで完全設定可能(キャリブレータ不要)
- フェイルモードプロセス機能
- 自動周囲温度補償
製品の概要
- 精度 ± 0.075 %
- 精度の詳細 ± 0.075% FS(@ 20 °C)
- 応用例 化学物質, フィルター監視, 流体計測と制御, 飲食, 燃料とガス, レベル監視と制御, 石油, 石油化学, ポンプ制御
- コンプライアンスに関する注意事項 CE; -IS、-FPサフィックス:ATEX適合 CE 0518 II 2G ia/db IIC T6/T5 Gb Ta<80 °C、T5 / II 2D Ex ia/tb IIIC T85 °C/T100 °C Db。型式承認番号 KDB 17ATEX0056X。ATEX規格:EN 60079-0:2012+A11:2013、EN 60079-1:2014、EN 60079-11:2012、EN 60079-26:2015、EN 60079-31:2014 IECEx適合:Ex ia/db IIC T6/T5 Gb / Ex ia/tb IIIC T85 °C/T100 ° Db。適合証明書 IECEx KDB 17.0008X。IECEx規格:IEC 60079-0:2011、IEC 60079-1:2014-06、IEC 60079-11:2011、IEC 60079-26:2006、IEC 60079-31:2013。
- 減衰時間 0~60秒
- 電気接続 1/2インチ NPT メスコンジット(ネジ付き端子台付き)
- 電気出力 0~20 mA
- エンクロージャーの定格 IP66, IP67, NEMA タイプ 4X
- 長期安定性 ≤0.075% FSO/3年
- 材料 アルミニウム
- 材料、湿潤 316Lステンレス鋼, FKM
- 対応媒体 燃料ガス, HVAC / 室内空気, 不活性/非反応性ガス, 蒸気
- MTBF 1,000,000 時間
- 出力信号 電流
- 圧力タイプ 差分
- プロセス接続サイズ 1/4インチ
- プロセス接続タイプ NPT メス
- 応答時間 16~480 ms
- シリーズID Series-3500
- 電源タイプ DC
- 供給電圧 10から55Vdc
- 熱効果 < ± 0.05% スパン/10 °C
Supported Applications
The Dwyer Series 3500 is a microprocessor-based smart differential pressure transmitter designed for flow measurement, level monitoring, filter or pump differential pressure applications, and critical process monitoring. The series measures compatible gases, steam, liquids, or vapors.
Operating Conditions & Performance
The Series 3500 delivers an accuracy of ±0.075% FS (@20°C) with a stability of ≤0.075% FSO/3 years and rangeability up to 25:1 turn down. Thermal effects are compensated by transmitter software, specified as <±0.05% span/10°C.
Operating temperature limits are -40 to 185°F (-40 to 85°C) for ambient conditions and -40 to 400°F (-40 to 204°C) for process temperatures when configured with a diaphragm seal (-DS). The unit features an enclosure rating of NEMA 4X IP66/IP67. Response time is programmable from 16 to 480 ms, and damping time ranges from 0 to 60 s.
Configuration Options
The series supports a wide configuration envelope including differential pressure or level applications with flexible calibration via push buttons. Key configurable dimensions include:
- Housing Materials: Aluminum (-AL) or Stainless steel (-AS).
- Process Connections: 1/4˝ female NPT (-NF) or diaphragm seal selection (-DS). Diaphragm seals are available as S-P flush (direct mount high side, capillary mount both sides/high side) and S-T extended types.
- Electrical Connections: Packing gland M20x1.5 (-1), two 1/2˝ female NPT conduit (-2), or screw terminal options.
- Output Signal: 4-20 mA with HART Communication (rev.5.1).
- Hazardous Location Approvals: Configurable as ATEX Compliant and IECEx Compliant via -IS (intrinsically safe) or -FP (flameproof) suffixes.
The series supports wetted materials of 316L SS and FPM; with diaphragm seals, the material is 316L SS. Power requirements are 10-55 VDC, with loop resistance for operation from 0 to 1500 Ω.
Key Product Differences
The Series 3500 model number structure defines specific configurations including housing type (-AL or -AS), measuring range codes (e.g., -02 for -10 to 10 in w.c. up to -40 for 0 to 1000 psi), and process connection types. Diaphragm seal variations include direct mount high side, capillary mount both sides, and specific flange sizes such as 2˝ ANSI (A) or 3˝ DN80 (D). Extension lengths are available in increments of 2˝ to 6˝, with capillary lengths configurable from 1 to 20 feet. Optional accessories include stainless steel tag plates (-MT, -ST), mounting brackets (-GB, -SB, A-630, A-631), flanged valve block manifolds (BBV-1F, BBV-22F), and NIST traceable calibration certificates (-NIST).
3500-ALAS-0204081015202538405060707172757880-NFDS-12-SPDH-SPRB-SPRH-STDH-STRB-STRH-A-B-C-D-0-2-4-6-00-カスタム-00-カスタム-FP-GB-IS-MT-SB-ST
ハウジング
レンジ
プロセス接続
電気接続
ダイアフラムシールタイプ
取り付けフランジ
ja-JP
ja_JP
設定を保存する


