한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
SA1-RTD-B-series
자기 접착 폴리이미드 고속 응답 RTD 표면 센서, 클래스 B 정확도
自己接着ポリイミド高速応答RTD表面センサー、クラスB精度
재고가 있는 모델
- 100オーム薄膜DINプラチナクラス「B」(±0.12オーム、0°Cで±0.30°C)精度標準
- 260°C(500°F)対応シリコーン接着剤
- 温度範囲 -73°C~260°C連続使用、OMEGABONDエアセットセメントと併用時は290°C(554°F)短時間使用可能
- 1m(40インチ)長さで在庫あり
마음에 드는 모델을 찾지 못하셨나요?
맞춤형 구성 도구를 사용하여 나만의 제품을 완벽하게 만들어보세요.
제품 개요
- 精度 クラスB
- 精度の詳細 100 Ω 薄膜DINプラチナクラス「B」(0°Cで±0.12%)精度標準
- 絶縁 PFA
- 取付 クラスDINプラチナ
- 名目抵抗 100 Ω
- パックサイズ 3
- プロセス温度(最高) 260 °C
- プロセス温度(最低) -73 °C
- 応答時間 水中浸漬時:<0.9秒;ホットプレート上:<2秒
- シリーズID SA1-RTD-B-series
- 温度係数 0.00385 Ω/Ω/°C
- 温度係数 注記 α = 0.00385 Ω/Ω/°C
- 温度センサーの種類 RTD
- 線径 26 AWG
Supported Applications
The Omega SA1-RTD Series consists of self-adhesive polyimide fast response RTD surface sensors designed for flexible surface temperature measurement. These thin-film platinum resistance detectors are engineered to mount directly onto clean, dry surfaces using a silicone adhesive backing with paper peel protection.
Operating Conditions & Performance
The series utilizes 100 Ω at 0°C platinum film elements conforming to DIN Class 'B' accuracy. The standard measurement range is -73 to 260°C (-99 to 500°F) for continuous operation, with short-term capability up to 290°C (554°F) when installed using OMEGABOND® Air Set Cements.
Performance specifications include a resistance tolerance of ±0.12% at 0°C and fast thermal response times: less than 0.9 seconds for 63% response in water flowing at 3' per second, and less than 2 seconds on a hot plate. The sensor pad dimensions are 25 x 25 x 3 mm (1.00 x 1.00 x 0.122").
Configuration Options
The SA1-RTD-B series is configurable across wire lengths, connector types, and wiring configurations to suit specific installation needs.
- Wire Lengths: Standard options include 1 m (40"), 2 m (80"), and 3 m (120"). Custom lead wires longer than 120" are available by modifying the model suffix, with cost added per additional 12".
- Connectors: Models may be ordered with MTP connectors or a standard size 3-pin OTP connector. An audio-style TA3F connector is also an option for specific termination requirements.
- Wiring Configuration: The series features 3-wire construction as standard, color-coded per IEC-60751 and ASTM-E-1137. A 2-wire style is available by inserting '2W' after the 'B' in the part number.
- Packaging: Sensors are sold in convenient packages of three units.
The sensor construction includes a polyimide base layer with silicone adhesive, topped with fiberglass tape and polyimide tape for electrical isolation. Extension wires consist of #26 AWG stranded nickel-plated copper that is PFA insulated and jacketed.
Key Product Differences
Variants within the SA1-RTD-B series are distinguished by their wire length suffixes (e.g., -80 for 80", -120 for 120") and connector designators. The base model number SA1-RTD-B denotes a sensor with standard lead wires, while adding -MTP, -OTP, or -TA3F specifies the termination type.
The series offers specific ordering modifications for 2-wire configurations and extended lengths. For example, replacing 'MTP' with 'OTA' provides a standard size 3-pin connector at no additional cost, whereas selecting the TA3F audio connector incurs an additional charge per pack. The model number guide follows the format: SA1-RTD-B - [Wire Length] - [Connector Type].
SA1-RTD-B-2W-4W-80-120-MTP-OTP-TA3F-TA4F