Skip to search Skip to main content Skip to navigation

Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

Series-681

Sanitary Pressure Transmitter, Easy Install, Water Resistant

衛生用圧力トランスミッター、3A準拠、簡単設置、防水仕様
  • 完全密封で、クリーンインプレースおよび滅菌インプレースの設置に耐え、衛生的なプロセスの規制条件をサポート
  • 衛生的なクランプ継手で簡単に取り付け可能
Series-681
From ¥ 395,009
衛生用圧力トランスミッター、3A準拠、簡単設置、防水仕様 Series-681 Series-681
loading all models
Product Overview
  • 精度 ± 0.2 %
  • 精度の詳細 ±0.20% FS(非直線性、ヒステリシス、非再現性を含む)
  • 破裂圧力 最大50 psi
  • クランプ効果 ゼロおよびスパンシフト:±0.15% FS
  • 補償温度、最大 180 °F
  • 補償温度、最小 20 °F
  • 電気接続 1/2インチ NPT オス コンジット(ケーブル付き)
  • 電気出力 0~20 mA
  • ループ抵抗 800 Ω
  • 材料、湿潤 316Lステンレス鋼
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, プロセス水/冷却水, 適合する液体, 不活性/非反応性ガス, 油/潤滑油, 有機溶剤
  • ワイヤ本数 2
  • 動作温度(最高) 260 °F
  • 動作温度(最低) -40 °F
  • 出力詳細 4~20 mA
  • 出力信号 電流
  • 圧力タイプ ゲージ
  • プロセス接続サイズ 2インチ
  • プロセス接続タイプ トライクランプ
  • 相対湿度 10~90% RH、非結露
  • 応答時間 ≤ 10 ms
  • シリーズID Series-681
  • スパン調整 ± 0.5 mA、非対話型
  • 電源タイプ DC
  • 供給電圧 9から30Vdc
  • 熱効果 ゼロおよびスパンシフト:±2.0% FS/100 °F
  • 重量 227 g
  • ゼロ点設定調整範囲 ± 0.5 mA、非インタラクティブ

Supported Applications

The Dwyer Series 681 Sanitary Pressure Transmitter is designed for sanitary installations according to 3A Standard #37-01. The series serves applications in food, dairy, beverage, and pharmaceutical processing. It supports liquid level control and monitoring within sanitary pipelines.

The unit features a fully sealed design intended to withstand high-pressure wash-down environments typical of Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The transmitter is insensitive to vibration, shock, EMI/RFI interference, and thermal shocks associated with these processes.

Operating Conditions & Performance

The Series 681 operates within a process temperature range of -40°F to 260°F (-40 to 125°C). The compensated ambient temperature range is specified as 20 to 180°F (-7 to 80°C), with humidity limits of 10 to 90% RH, non-condensing.

Performance specifications include an accuracy of ±20% FS (includes non-linearity, hysteresis and non-repeatability). The response time is documented as ≤ 10 ms. Thermal effects result in a zero and span shift of ±2.0% FS/100°F.

The transmitter utilizes a unique, no liquid fill diaphragm design. It provides a 4-20 mA, 2-wire output signal powered by 9-30 VDC, with a maximum loop resistance of 800 Ω. The unit weighs 8 oz (227 g).

Configuration Options

The series offers multiple measurement ranges to accommodate specific process requirements. Available pressure spans include:

  • 681-02: 0 to 1 psi (Overpressure: 50 psi)
  • 681-12: 0 to 2 psi (Overpressure: 100 psi)
  • 681-42: 0 to 15 psi (Overpressure: 150 psi)
  • 681-52: 0 to 30 psi (Overpressure: 150 psi)
  • 681-62: 0 to 60 psi (Overpressure: 180 psi)

The process connection is a 2" or 1-1/2" sanitary clamp fitting male NPT. Wetted parts are constructed from 316L SS, compatible with liquids and gases. The electrical interface includes a 1/2" conduit fitting and strain relief with 15 ft (4.5 m) cable.

The transmitter features non-interactive zero and span adjustment capabilities of ±0.5 mA. Clamping effects on performance are documented as:

  • ±0.15% FS for ranges up to 30 psi
  • ±0.25% FS for ranges >30 psi

An optional NIST traceable calibration certificate (Order Code: NISTCAL-PT1) is available.

Key Product Differences

The Series 681 distinguishes itself through its sanitary clamp fitting design and no liquid fill diaphragm, which ensures negligible clamping effect on the output signal. The unit is factory calibrated and requires minimal field adjustment; however, if adjustments are made, zero and span screws with O-rings must be replaced to prevent moisture ingress.

Physical dimensions for the transmitter body include a diameter of 2.516 [64], height of 2.272 [58], and process connection height of 1.743 [44]. The design is completely watertight, utilizing sealed screws for adjustment access.

en-AU
ja_JP
Save Configuration