日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
PR-16
RTD 유틸리티 핸들 프로브
在庫のあるモデル
- 그립이 편리한 스트레인 릴리프가 있는 긴 손잡이
- 저온 범위: -50~250°C (-58~482°F)
- 고온 범위: -50~450°C (-58~842°F)
- 극한 온도 범위: -200~600°C (-328~1112°F)
ぴったりのモデルが見つかりませんか?
カスタムコンフィギュレーターで夢の製品を作りましょう
製品の概要
- 정확도 클래스 A
- 정확도 세부 사항 클래스 A -100~450 °C (-148~842 °F); 그 외 범위는 클래스 B
- 케이블 길이 5 ft
- 외함 등급 IP67
- 단열 TPE
- 명목상 저항 100 Ω
- 와이어 수 2
- 프로브 유형 침지 프로브
- 저항/곡선 사양 참고 0 °C에서 100 Ω 및 1000 Ω 표준; TCR = 0.00385 Ω/Ω/°C 표준
- 시리즈 ID PR-16
- 충격 IEC 60068-2-27; 50 g/11 ms (프로브 15개를 함께 시험) 지속 시간: 1일
- 온도 계수 0.00385 Ω/Ω/ °C
- 온도 계수 사양 참고 α = 0.00385 Ω/Ω/°C
- 온도 프로브 형식 침수 탐침
- 온도 범위 극한
- 온도 센서 유형 RTD
- 진동 IEC 60068-2-6; 5~2000 Hz, 스윕 속도: 분당 1회; 스윕 사이클 수: 10회, 가속도: 5 g (프로브 15개를 함께 시험); 지속 시간: 1일
- 와이어 게이지 28 AWG
Supported Applications
The Omega PR-16 series consists of handheld RTD (Resistance Temperature Detector) utility handle probes designed for portable temperature measurement. The series features an easy-grip molded handle and a retractable cable system, allowing the probe to be stored in toolboxes or other locations for convenient access during field operations.
Operating Conditions & Performance
The PR-16 series offers three distinct model variants—PR-16L (Low), PR-16H (High), and PR-16E (Extreme)—each covering specific process temperature ranges. The PR-16L supports -58 to 250°C (-58 to 482°F). The PR-16H covers -50 to 450°C (-58 to 842°F), while the PR-16E extends from -200 to 600°C (-328 to 1112°F).
Accuracy specifications vary by model and temperature span. The PR-16L provides Class A accuracy across its range. For the PR-16H, performance is Class A from -50 to 300°C (-58 to 572°F), or else Class B outside this interval. The PR-16E delivers Class A accuracy from -100 to 450°C (-148 to 842°F), with Class B performance elsewhere.
Response time (T90) depends on the probe diameter and model variant. For example, a 1/8" PR-16L responds in 2.4 seconds, whereas a 1/8" PR-16E requires 9 seconds under comparable conditions. All models utilize standard PT100 Ω or PT1000 Ω elements with a TCR of 0.00385 Ω/Ω/°C.
The series meets specific mechanical durability standards: IEC 60068-2-6 for vibration (5 to 2000 Hz sweep rate, one active per minute; number of sweep cycles 10 and acceleration 5g) and IEC 60068-2-27 for shock (50g/11ms). Ingress protection is rated IP67 for PR-16L and PR-16E models.
Configuration Options
The series supports a wide range of configurable dimensions to accommodate different installation needs:
- Diameters: 1/8, 3/16, and 1/4 inch options are available across all models.
- Probe Lengths: Standard lengths include 2, 3, 4, 6, 12, 18, and 24 inches. Custom lengths may be built using the manufacturer's configurator.
- Cable System: A 3-conductor retractable cable is standard at 1 foot in length but expandable to 5 feet. The wire material is TPE (coiled).
- Termination: Standard termination consists of stripped-end lead wires; other terminations may be configured.
Key Product Differences
The PR-16 series distinguishes itself through three primary model families defined by temperature capability and ingress protection. The PR-16L (Low) variant is optimized for lower temperatures up to 250°C with Class A accuracy throughout its range and includes IP67 rating. The PR-16H (High) model extends the upper limit to 450°C but does not carry an ingress protection rating in the specification table; it maintains Class A accuracy only within a narrower band (-50 to 300°C). The PR-16E (Extreme) variant covers the widest range from -200 to 600°C, includes IP67 protection, and offers faster response times than standard probes at equivalent diameters due to its specific construction.
All variants share identical nominal resistance standards (100 Ω or 1000 Ω at 0°C) and TCR values. Differences in performance are strictly tied to the selected temperature range model and probe diameter, which directly influence response time metrics as documented in the specification table.
PDFとマニュアル