日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-RSV
RDCV 다이어프램 제어용 RSV 파일럿 솔레노이드 밸브, 간편 장착
RDCVダイヤフラム制御用RSVパイロットソレノイドバルブ、簡単取付け- 여과 및 무유분
- 내후성 인클로저 패키지 제공
- DCT 타이머 보드와 동일 인클로저에 장착 가능, 공장에 문의하십시오
製品の概要
- Cv 팩터 0.33 gal/min
- 외함 등급 IP66, NEMA 타입 4X
- 접액부 재질 알루미늄, 부나-N (NBR), 스테인리스 스틸
- 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, 비활성 가스/비반응성 가스
- 장착 방향 위치 민감이 아니야
- 작동 온도, 최대 122 °F
- 최소 작동 온도 -4 °F
- 공압관 길이 최대 9.8피트
- 전력 소비 12 W, 돌입 공격: 17 VA, 홀딩: 14.5 VA
- 압력 한계 4.4 ~ 124.7 psi
- 프로세스 연결 크기 1/8인치
- 프로세스 연결 유형 NPT 암나사
- 공정 온도, 최대 185 °F
- 최소 공정 온도 -4 °F
- 시리즈 ID Series-RSV
- 무게 0.6 lb
Supported Applications
The Dwyer Series RSV Pilot Solenoid Valve is designed to operate the Series RDCV remote type diaphragm valve. A primary application documented for this series is air pulse cleaning of filters in dust collectors. The unit functions with compatible gases that are filtered and oil free.
Operating Conditions & Performance
The Series RSV operates within an ambient temperature range of -4 to 185°F (-20 to 85°C) and a storage temperature limit of -4 to 122°F (-20 to 50°C). Pressure limits are specified as a minimum of 4.4 psi (0.3 bar) and a maximum of 124.7 psi (8.6 bar). The valve features a Cv value of .33 and supports any mounting orientation.
Power requirements include 110 VAC, 220 VAC, or 24 VDC. Power consumption is rated at 12 W, with an inrush of 17 VA and holding current of 14.5 VA. The maximum pneumatic tube length supported is 9.8 ft (3 m). Wetted materials consist of an aluminum body, a core and spring made of 304 SS, and NBR seals.
Configuration Options
The series offers configurable electrical connections and voltage options to suit specific control environments:
- Voltage Options: Available in 110 VAC, 220 VAC, or 24 VDC.
- Electrical Connections: Models are offered with either a DIN connection or wire leads (18 AWG, 22" [55 cm] long).
- Housing and Enclosure: The valve features an enclosure rating of NEMA 4X. Data sheet specifications list the IP66 rating for the Series RSV pilot valve.
The series also supports integration with multi-valve enclosures known as Series SVE Solenoid Valve Enclosures. These weatherproof packages house multiple solenoids pre-wired to a terminal block and are available in 6 or 12 valve configurations. The SVE enclosure material is anodized aluminum with an NBR gasket, rated NEMA 4X (IP65). Consult the factory for mounting RSV valves with DCT timer boards together in one enclosure.
Key Product Differences
The Series RSV model numbers follow a specific structure indicating voltage and electrical connection type. The available variants include:
- DIN Connection Models (D suffix): RSV1D (110 VAC), RSV2D (220 VAC), and RSV3D (24 VDC).
- Wire Lead Models (L suffix): RSV1L (110 VAC), RSV2L (220 VAC), and RSV3L (24 VDC).
The Series SVE enclosures are distinguished by the quantity of solenoids they house. Models include SVE06WP for 6-valve configurations and SVE12WP for 12-valve configurations, with voltage suffixes corresponding to the internal pilot valve requirements (e.g., SVE06WP61 for 110 VAC). The Series RSV is not field serviceable; units requiring repair must be returned.