日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-RSF
回転式流量計 空気/水/ガス用 – シールド付き直接読み取り
- 反射レンズ背景と1.5倍拡大レンズにより視差と目の疲れを軽減し、時間を節約してより正確な読み取りを可能にします
- 厚手のポリカーボネート製フロントシールドによる長寿命で、チューブの破損を防ぎ、読み取り解像度を高める拡大レンズとして機能します
- 破損時の安全性を高める安全ブローアウトバックパネルを付属し、保護性能を強化しています
製品の概要
- 精度 ± 7 %
- 対応媒体 プロセス水/冷却水, HVAC / 室内空気
- 動作温度(最高) 250 °F
- 圧力タイプ ゲージ
- プロセス接続に関する注記 2個の3/8インチメスNPT
- プロセス接続サイズ 3/8 インチ
- プロセス接続タイプ NPT メス
- 耐圧力 最大150 psi
- 繰り返し精度 ± 0.25%
- スケールの長さ 127 mm
- シリーズID Series-RSF
- ターンドダウン比 10:1
Supported Applications
The Dwyer Series RSF Rotatable Scale Flowmeters are variable area flowmeters designed for the direct measurement of air, water, and other commonly used gases or liquids. These instruments feature a tapered borosilicate glass flowtube with a metallic float and a rotatable dual-scale shield that allows operators to read directly in SCFM/SLPM for air or GPM/LPM for water without correlation charts.
Operating Conditions & Performance
The series supports two primary material configurations, each with distinct operating limits. Brass/Stainless Steel models operate up to 250°F (121°C) and a maximum pressure of 150 psig (10.34 bar) @ 200°F (93°C). PTFE wetted parts are rated for temperatures up to 150°F (65°C) with a maximum pressure of 100 psig (6.7 bar).
Performance specifications include an accuracy of ±7% FS and repeatability of ±0.25% FS, based on the series data sheet values which take precedence over manual listings citing different accuracies. The flowmeters offer a turn-down ratio of 10:1 with direct reading scales marked at 127 mm.
Measurement Ranges
- Air: 5 SCFM (140 LPM) to 30 SCFM (900 LPM)
- Water: 1.2 GPM (4 LPM) to 5 GPM (20 LPM)
Configuration Options
The Series RSF is configurable across mounting styles, wetted materials, and valve options to suit specific installation needs.
Mounting & Housing Options
- In-line: Designed for vertical installation in process lines with two 3/8" female NPT connections. Overall height is 11-1/8 [282.58] inches.
- Panel Mount: Features a panel cutout requiring two 7/8" diameter holes spaced 9.469" (240.5 mm) apart. Includes a thick polycarbonate front shield for protection and a safety blow-out back panel.
Wetted Materials & Construction
- Brass/SS Models: Flowtube is borosilicate glass; floats, float stops, and end fittings are Type 316 stainless steel or brass. O-rings are fluoroelastomer.
- PTFE Models: Floats, float stops, end fittings, and O-rings utilize PTFE for chemical compatibility in specific applications.
Valve & Calibration Options
- Needle Valve: A 6-turn needle valve is standard on models indicated with a "V" suffix (e.g., RSF011V).
- NIST Traceable Calibration: Available as an option via NISTCAL-FL1 for air flowmeters and NISTCAL-FL2 for water flowmeters.
Safety & Installation Notes
The series includes a reflective lens background with 1.5X magnification to reduce parallax error. Safety warnings indicate that lines must be purged of dust prior to installation, and valves should be opened gradually after connection inspection. A leak test is recommended for hazardous fluids.
Key Product Differences
The Series RSF model numbering distinguishes between material construction, mounting type, valve inclusion, and flow range:
- Material Code: Models beginning with "0" (e.g., RSF011) indicate brass wetted parts; models beginning with "1" (e.g., RSF111) indicate Type 316 stainless steel.
- Mounting & Valve Suffixes: The third digit indicates the flow range. A trailing "V" denotes a model equipped with a needle valve, while its absence indicates no valve.