検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-DFMT2

リモートデジタルパドルホイール流量トランスミッター、4-20 mA、PVDFセンサー

원격 디지털 패들휠 유량 송신기, 4-20 mA, PVDF 센서
  • 2ピース設計により、ユーザーは制御表示部をアプリケーションから分離でき、スペースが限られた場所に最適です
  • 大型バックライト付きLCDディスプレイは瞬時流量および累積流量を表示し、最大流量のパーセントを示す視覚的インジケーターバーを備えています
  • 高精度パドルホイール技術と耐腐食性PVDFセンサーにより長寿命を実現
  • トータライザはユーザーがいつでもリセット可能で、単一バッチの総量計測に最適です
  • セキュリティパスワード保護により、無断変更を防止
Series-DFMT2
販売元 ¥ 262,059
원격 디지털 패들휠 유량 송신기, 4-20 mA, PVDF 센서 Series-DFMT2 Series-DFMT2
loading all models
製品の概要
  • 精度 ± 1.5%
  • 応用例 깨끗한 물과 정제된 용액, 유체 측정 및 제어, 산업 및 제조업
  • 表示に関する注意事項 2.38 x 1.25" (60.33 x 31.75 mm) LCD, 누적 표시 최대: 9,999,999,999
  • 表示タイプ LCD
  • 電気接続 탈착식 나사 단자
  • エンクロージャーの定格 IP65
  • 材料 ABS
  • 材料、湿潤 도자기, 플루오로실리콘, PVDF
  • 対応媒体 정제 공정 / 냉각수, 호환 가능한 액체, 오일 / 윤활제, 유기 용매
  • 動作温度(最高) 149 °F
  • 動作温度(最低) -4 °F
  • 出力詳細 아날로그: 4~20 mA(최대 루프 저항 750 Ω); 펄스: NPN 구형파 출력; 주파수: 0~2 kHz(조정 가능); 펄스 폭: 0~1000 ms(조정 가능)
  • 出力信号 전류, DC 펄스
  • 消費電力 2 W
  • 圧力限界 최대 145 psi
  • プロセス接続タイプ NPT 수나사
  • プロセス温度(最高) 194 °F
  • プロセス温度(最低) -4 °F
  • 繰り返し精度 ± 0.5%
  • シリーズID Series-DFMT2
  • 電源タイプ DC
  • 供給電圧 12 ~ 24 Vdc

Supported Applications

The Series DFMT2 Remote Digital Paddlewheel Flow Transmitter is a two-piece digital flow transmitter designed for instantaneous and totalizing flow monitoring of compatible clean liquids. The series utilizes high accuracy, industry-proven paddlewheel technology with a corrosion-resistant PVDF sensor to support long operation life in industrial environments.

Documented applications include reverse osmosis water purifying systems and installations where space is limited or separation between the control panel and the process application is required.

Operating Conditions & Performance

The Series DFMT2 operates within a process temperature range of -4 to 194°F (-20 to 90°C) and an ambient temperature range of -4 to 149°F (-20 to 65°C). The transmitter is rated for pressures up to 145 psi (1.0 MPa).

Performance specifications include:

  • Accuracy: ±1.5% FS
  • Repeatability: ±0.5% FS
  • Resolution: Up to 3 decimal points for both flow and totalization units
  • Totalizing Display Maximum: 9,999,999,999

The unit requires a power supply of 12 to 24 VDC with a maximum loop resistance of 750 Ω for the analog output. The enclosure is rated IP65 and constructed from ABS plastic.

Measurement Ranges by Model

  • DFMT2-10A: 0.44 to 7.93 GPM (0.1 to 1.8 m³/h)
  • DFMT2-15A: 0.88 to 17.61 GPM (0.2 to 4 m³/h)
  • DFMT2-20A: 1.32 to 26.42 GPM (0.3 to 6 m³/h)
  • DFMT2-25A: 2.20 to 52.83 GPM (0.5 to 12 m³/h)
  • DFMT2-40A: 6.61 to 105.67 GPM (1.5 to 24 m³/h)
  • DFMT2-50A: 8.81 to 176.11 GPM (2 to 40 m³/h)

Configuration Options

The Series DFMT2 features a two-piece design that separates the sensor from the display and electronics, connected by a cable length of 197" [5 m]. The remote mounting bracket is constructed of stainless steel with overall dimensions of 3-7/8" [100] x 4-1/2" [114.30] x 1-13/32" [35.72].

Wetted Materials and Construction

  • Sensor and Impeller: PVDF
  • Shaft: Ceramic
  • O-Rings: Fluoroelastomer

Output Signals and Electrical Connections

The transmitter offers user-selectable output configurations via removable screw terminals. Available outputs include:

  • Analog: 4 to 20 mA (750 Ω max. loop resistance)
  • Pulse: NPN square wave output with adjustable frequency from 0 to 2 kHz and pulse width from 0 to 1000 ms

Electrical connection terminals support RS485 communication (RS DATA+, RS DATA-), input power (12 to 24 V+/-), sensor power (VO+), and sensor communication (SIN+/SIN-).

Process Connections

The series supports the following NPT process connections corresponding to specific model ranges:

  • DFMT2-10A: 3/8" NPT
  • DFMT2-15A: 1/2" NPT
  • DFMT2-20A: 3/4" NPT
  • DFMT2-25A: 1" NPT
  • DFMT2-40A: 1-1/2" NPT
  • DFMT2-50A: 2" NPT

Display and Configuration Features

The remote unit includes a large backlit LCD display measuring 2.38 x 1.25" (60.33 x 31.75 mm). Users can reset the totalizer at any time and set a security password to protect system settings from unauthorized changes.

Key Product Differences

The Series DFMT2 is distinguished within the broader paddlewheel family by its remote two-piece architecture, whereas the related Series DFMT features an integrated compact display. Both series share identical measurement ranges, wetted materials (PVDF sensor/impeller, ceramic shaft, fluoroelastomer O-rings), accuracy specifications (±1.5% FS), and output capabilities.

Key physical distinctions for the Series DFMT2 include:

  • Housing Dimensions: 4-1/2" [114.30] x 4-9/16" [115.89] (remote mounting bracket)
  • Cable Length: Fixed at 197" [5 m]
  • Mounting Bracket Material: Stainless steel
  • Weight Range: Varies by model from 1.76 lb (0.8 kg) for the DFMT2-10A to 2.43 lb (1.1 kg) for the DFMT2-50A.

The Series DFMT2 is not field serviceable; units requiring repair must be returned as a complete assembly.

ja-JP
ja_JP
設定を保存する