検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

FMG70B-Series

パルスまたは電流出力低流量電磁流量計

펄스 또는 전류 출력 저유량 전자기 유량계
  • 可動部なし
  • 流れの妨げなし
  • メンテナンス不要
  • 高速応答時間(< 500 ms)
FMG70B-Series
販売元 ¥ 451,688
펄스 또는 전류 출력 저유량 전자기 유량계 FMG70B-Series FMG70B-Series
loading all models
製品の概要
  • 精度 ± 1.5 %
  • 精度の詳細 読み値の±1.5% ± 範囲の0.3%
  • 導電率 50 µS/cm
  • 電気接続 M12 4ピン メス
  • エンクロージャーの定格 IP65, NEMA タイプ 4X
  • 流量表示 LEDグリーン
  • 流量表示に関する注記 流量比例点滅
  • 荷重抵抗 250 Ω
  • 材料 PEEK、アルミニウム
  • 材料、湿潤 EPDM, ステンレス鋼
  • 電流(最大) 26_ma_約
  • 対応媒体 導電性液体, 腐食性化学薬品/酸/アルカリ, 塩水/ブライン
  • 出力数 1
  • 動作圧力(最大) 232 psi
  • 動作温度(最高) 70 °C
  • 動作温度(最低) 5 °C
  • 出力詳細 増幅方形波
  • 出力パルスレートノート 方形波信号 NPN、内部プルアップ抵抗 2 kΩ、パルスデューティ比 50:50
  • 消費電力 150 mA
  • プロセス温度(最高) 90 °C
  • プロセス温度(最低) 0 °C
  • 繰り返し精度 ± 1%
  • 応答時間 < 500 ms
  • シリーズID FMG70B-Series
  • ショートサーキット保護 < 30 V
  • 短絡保護機能付きメモ 短絡保護(最大30V)および極性保護(最大-30V)を測定
  • 電源注記 24 Vdc ± 10%
  • 電源タイプ DC
  • 供給電圧 24 Vdc

Supported Applications

The FMG70B Series is a trio of extremely compact, low-cost inductive magnetic flow sensors for measuring or metering water and aqueous solutions. Operating without moving parts, the sensors bring a highly reliable magnetic-inductive technique to low-flow process-control points that were previously difficult to instrument.

Because measurement is unaffected by changes in temperature, density, viscosity, concentration or electrical conductivity, the FMG70B is well suited to dosing, blending and monitoring of electrically conductive liquids. The fluid must have a minimum conductivity of 50 µs/cm and the measuring tube must remain completely filled. The device is not a safety component and must not be used as one.

Operating Conditions & Performance

Accuracy is ±1.5% of reading ±0.3% range, with repeatability of 1% and a response time of < 500 ms. The sensor is powered from 24 Vdc ±10% and drives a maximum load of 250 Ω to GND through an M12 x 1 plug connector.

Process temperature is rated to 90°C, with an ambient range of 5 to 70°C. The pressure rating is 16 bar, and the enclosure is rated NEMA 4X (IP65). Wetted parts comprise Stainless steel 316 TI electrodes and process connection, a PEEK-GF30 measuring pipe and an EPDM gasket, with a cast aluminum housing. The series is CE and RoHS marked and carries a 1 year warranty.

Available accessories include the M12C-PVC-4-R-F-5 (5 m) and M12C-PVC-4-R-F-10 (10 m) right-angle M12 cables with stripped leads, and the PSU-93 unregulated power supply.

Configuration Options

The three base sensors differ chiefly by measuring range and pulse resolution. FMG71B covers 0.5 to 30 LPM (0.13 to 7.93 GPM) at 3785 pulses/gal; FMG72B covers 1 to 60 LPM (0.26 to 15.85 GPM) at 1893 pulses/gal; and FMG73B covers 5 to 250 LPM (1.32 to 66 GPM) at 757 pulses/gal.

Physical size follows range: the FMG71B and FMG72B share a body of 124 mm length, 80 mm width and 36 mm height, while the larger-range FMG73B is 140 mm long, 80 mm wide and 36 mm high. The standard output is an NPN frequency pulse; the -A models add a 4 to 20 mA (0 to full scale) analog output, and -BSP models provide a BSP thread connection.

Key Product Differences

  • FMG71B — 0.5 to 30 LPM (0.13 to 7.93 GPM); NPN frequency 3785 pulses/gal
  • FMG72B — 1 to 60 LPM (0.26 to 15.85 GPM); NPN frequency 1893 pulses/gal
  • FMG73B — 5 to 250 LPM (1.32 to 66 GPM); NPN frequency 757 pulses/gal

Each base model is also offered with a -A analog-output option and a -BSP thread option, for example FMG71B-A, FMG72B-BSP and FMG73B-A-BSP.

アクセサリー

accessories

DC Cable Assemblies for Probes, Sensors and Transmitters
¥6,389 / 各
0 在庫あり
DC POWER SUPPLIES
¥16,545 / 各
0 在庫あり
ja-JP
ja_JP
設定を保存する