検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-MSX-Pro

プロ差圧トランスミッター - 32レンジ - NISTオプション

  • フリップリッドハウジングによりユニットの配線に簡単にアクセス可能
  • 製品の革新的な設計により、PCBの下の電子部品を保護し、設置時の誤っての損傷を防止
  • いたずら防止カバーによる追加の安全性と保護
  • 付属の液体密閉ケーブルグランドフィッティングにより、ケーブル出口付近の液体および湿気から保護
  • 付属の工具不要端子台により、迅速かつ簡単な配線で設置時間を短縮
  • UL94 V-0およびプラナム評価により、自治体および建築基準に適合する多様な用途に安全性を追加
Series-MSX-Pro
販売元 ¥ 38,121
プロ差圧トランスミッター - 32レンジ - NISTオプション Series-MSX-Pro Series-MSX-Pro
loading all models
製品の概要
  • 精度の詳細 ±0.5% FSO
  • 応用例 建設と維持管理, HVAC
  • 破裂圧力 最大 6 psi
  • 電気接続 1/2インチ NPSメスコンジット、ネジ式端子台付き
  • 電気出力 4~20 mA、0~5 Vdc、0~10 Vdc
  • エンクロージャーの定格 IP66, NEMA タイプ 4X, UL94 V-0, UL 2043 (プレナム)
  • 長期安定性 ± 1% FSO/年
  • ループ抵抗 現在の出力:0~1250 Ω 最大、電圧出力:負荷抵抗 1 kΩ 最小。
  • 材料建設オプション 該当なし
  • 材料、湿潤 メーカーにお問い合わせください
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
  • 取り付けに関する注意事項 位置感応ではない
  • ワイヤ本数 2, 3
  • 動作温度(最高) 70 °C
  • 動作温度(最低) -20 °C
  • 出力詳細 フィールド選択可能
  • 出力信号 電流、電圧
  • 消費電力 最大21 mA
  • 圧力タイプ 差分
  • プロセス接続サイズ 1/8インチ、3/16インチ、1/4インチ
  • プロセス接続タイプ 段付きバーブ継手
  • 応答時間 3秒
  • 応答時間の注記 瞬時(デフォルト)または3秒(選択可能)
  • シリーズID Series-MSX-Pro
  • スパン調整 プッシュボタン
  • 電源タイプ AC / DC
  • 供給電圧 2線式:10から36Vdc、3線式:17から36Vdc/21.6から33Vvc
  • 重量 230 g
  • 線径 26から16 AWGまで
  • ゼロ点設定調整範囲 デジタルプッシュボタン

Supported Applications

The Dwyer Series MSX Pro Magnesense® Differential Pressure Transmitter is designed for critical building performance applications. It monitors uni- or bidirectional differential pressure and can calculate linear velocity or flow via square root extraction. The transmitter delivers outputs in specified units (in w.c., mm w.c., Pa) suitable for HVAC control systems.

Service media includes air and non-combustible, compatible gases. Wetted materials should be confirmed by consulting the factory.

Operating Conditions & Performance

The Series MSX Pro operates within an ambient temperature range of -4 to 158°F (-20 to 70°C). Accuracy is specified as ±0.5% FSO for all ranges, except the unidirectional .5 in w.c. range which is rated at ±1% FSO. Long-term stability is documented as ±1% FSO/year.

Pressure limits vary by selected range:

  • Ranges 0 and 1: 3.6 psi max operation, 6 psi burst
  • Ranges 2, 3, and 4: 6 psi max operation, 6 psi burst

Response time is instantaneous by default or selectable to 3 seconds via DIP switch configuration.

Configuration Options

The series supports a total of 32 pressure ranges across five range groups (0 through 4), configurable for unidirectional (0-based) or bidirectional (± maximum span) operation. Units are selectable as in w.c., mm w.c., Pa, kPa, FPM, m/s, CFM, or CMH.

Output signals and power configurations include:

  • 2-wire output: 4-20 mA with 10-36 VDC supply (max loop resistance 0-1250 Ω)
  • 3-wire output: Selectable 0-10 V or 0-5 V with 17-36 VDC or isolated 21.6-33 VAC supply
  • Simultaneous outputs: Current and voltage available when using a DC power supply (not designed for AC operation)

The enclosure is rated NEMA 4X (IP66) with UL 2043 (Plenum) and UL94 V-0 compliance. Electrical entry uses a 1/2" NPS thread with an included cable gland, connecting to a 4-position removable terminal block for 16 to 26 AWG wire.

Process connections accept flexible tubing in sizes: 1/8", 3/16", 1/4", 5 mm, and 6 mm ID. Mounting options include wall mount brackets, duct mount brackets (universal model required), and DIN rail mounts. An optional 4-digit LCD display is available for local viewing.

Key Product Differences

The Series MSX Pro includes communicating models that support BACnet MS/TP or Modbus® RTU protocols over TIA/EIA-485 interfaces, distinct from the standard analog output variants. Communication parameters such as baud rate (9600 to 115200), parity, and stop bits are configurable via DIP switches.

Models differ by mounting style (Universal vs. Wall/DIN) and directionality (Unidirectional vs. Bidirectional). The optional LCD display is a separate accessory that plugs into the circuit board pins; it must be removed prior to wiring if installed. Factory calibration certificates are available as options, including NIST traceable versions.

アクセサリー

installation hardware

1/2インチオスNPT継手付きケーブルグランド
¥4,551 / 各
0 在庫あり

meters/controllers

Replacement LCD display for MSXP
¥11,092 / 各
0 在庫あり
MSXP-WUN1201234-INPAMM-LCD-A481-COM-FC-FP-NIST-STX
取り付け
方向
圧力範囲
測定単位
ディスプレイ
オプション
"
ja-JP
ja_JP
設定を保存する