日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
OMB-DAQ-USB-2401
ポータブルUSB熱電対/電圧入力データ収集モジュール
- 8差動または16シングルエンドアナログ入力
- 最大1000サンプル/秒の24ビット分解能
- タイプJ、K、T、E、R、S、B、N熱電対または電圧入力にユーザープログラム可能
- OMEGAより無料でダウンロード可能なWindowsソフトウェアスイート - DAQセントラルメニュー駆動のWindowsソフトウェアおよびWindows XP、Vista、Windows 7用のVisual Basic、C#、Visual C++向け.NET API/ドライバー
製品の概要
- 精度 ± 0.02 %
- アナログI/Oノート アナログ入力 注記: TC入力; 熱電対精度: 非常に遅いモードで24ビット分解能: J = ±1.1°C、K = ±1.2°C、T = ±1.1°C、E = ±1.0°C、R = ±2.5°C、S = ±2.6°C、B = ±3.3°C、N = ±1.5°C; コールドジャンクション補償精度: ±1.0°C; アナログ入力精度; 差動入力: 非常に遅いモードで、読み値の0.015% + 範囲の0.004% + 10μV(ノイズ除く); シングルエンド入力: 非常に遅いモードで、読み値の0.05% + 範囲の0.01% + 50μV(ノイズ除く); 熱電対開放検出: チャンネルが熱電対センサー用に設定されている場合に自動的に有効化
- 構成パラメータ ユーザー設定可能な入出力
- データインターフェース イーサネット、USB 1.1、USB 2.0
- データインターフェースに関する注意事項 構成方法:DAQ Central ソフトウェア;対応OS:Microsoft Windows®XP SP2 / VISTA / 7
- デジタル出力 12 Vdc
- 高さ 39 mm
- 入力構成 接続ソフトウェア
- 入力タイプ 熱電対、電圧
- 絶縁 PCから500 V
- LEDインジケータ 電源および動作LED点滅
- 長さ 128 mm
- 取付 DINレールまたは壁面取付け
- チャンネル数、入力 アナログ:16 SE/8 DIFF
- 動作温度(最高) 50 °C
- 動作温度(最低) 0 °C
- 相対湿度 0~95% RH 非結露
- シリーズID OMB-DAQ-USB-2401
- 最大保管温度 85 °C
- 保管温度(最低) -40 °C
- 電源注記 USBポートから直接給電、最大500 mA、または外部7.5~12 Vdcから給電、外部励起出力電圧:12 Vdc調整済み、最大総出力電流67 mA
- 供給電圧 5 Vdc
- 電圧測定範囲 ±10V、±500 mV、±5V、±250 mV、±2.5V、±125 mV、±2V、±75 mV、±1V、±30 mV
- 重量 0.23 kg
- 幅 107 mm
Supported Applications
The Omega OM-DAQ-USB-2401 is an 8/16-channel thermocouple and voltage input USB data acquisition module designed for portable data acquisition applications. The series supports user-programmable inputs for Type J, K, T, E, R, S, B, and N thermocouples or software-configurable voltage ranges from -30 to 30 mV up to ±10 V full scale.
Documented use cases include benchtop operation, DIN rail mounting in rack applications, or wall-mounted permanent installations. The module is designed for dry, moisture-free indoor environments only and includes built-in cold junction compensation and open thermocouple detection when channels are configured for thermocouple sensors.
Operating Conditions & Performance
The OM-DAQ-USB-2401 operates within an ambient temperature range of 0 to 50°C (32 to 122°F) and a relative humidity rating of 0 to 95% RH non-condensing. Storage temperatures are specified from -40 to 85°C (-40 to 185°F). The device provides 24-bit resolution with sequential measurement at approximately 1 ms per channel, achieving up to 1000 samples per second total across all active channels.
Performance specifications vary by input type and mode. In very slow mode (typical), thermocouple accuracy is listed as J = ±1.1°C, K = ±1.2°C, T = ±1.1°C, E = ±1.0°C, R = ±2.5°C, S = ±2.6°C, B = ±3.3°C, and N = ±1.5°C. Cold junction compensation accuracy is ±1.0°C.
Analog input accuracy in very slow mode (typical) is 0.015% of reading + 0.004% of range +10uV for differential inputs, and 0.05% of reading + 0.01% of range +50uV for single-ended inputs (exclusive of noise). The module provides 500 V isolation between the input channels and the PC.
Configuration Options
The series supports configurable channel types on a per-channel basis, allowing mixed thermocouple and voltage measurements within the same unit. Power is supplied directly from a USB port (max 500 mA) or via an optional external power adaptor rated +7.5 to +12 Vdc.
- Input Ranges: Thermocouples Type J (-18 to 1200°C), K (-129 to 1372°C), T (-101 to 400°C), E (-184 to 1000°C), R (204 to 1768°C), S (204 to 1768°C), B (538 to 1820°C), and N (-129 to 1300°C). Voltage inputs include -10 to 10V, -5 to 5V, -2.5 to 2.5V, -2 to 2V, -1 to 1V, -500 to 500 mV, -250 to 250 mV, -125 to 125 mV, -75 to 75 mV, and -30 to 30 mV.
- Excitation: Provides +12 Vdc regulated output with a maximum total current of 67 mA for sensor excitation.
- Connectivity: USB 2.0 full-speed interface compatible with USB 1.1 and USB 2.0 ports; supports up to 10 DAQ units per PC via self-powered or USB-powered hubs.
- Mounting Options: Includes hardware for wall mounting (drill holes 5.50 inches apart) or DIN rail mounting adaptors.
Key Product Differences
The OM-DAQ-USB-2401 is the primary model in this series, described as an 8/16-channel thermocouple/voltage input USB data acquisition module. The unit ships with Omega DAQ Central software and includes a mounting kit (screws, brackets, DIN rail adaptors), terminal blocks, a universal power adaptor, and two Type K insulated beaded wire thermocouples.
Accessory options available for the series include spare 1.83 m USB cables (OM-DAQ-USB-CABLE), spare 9 Vdc universal power adaptors (UNIV-AC-100/240), and additional terminal blocks (OM-DAQ-USB-TB). The device is not designed for medical or nuclear applications, nor should it be operated in flammable or explosive environments.
ソフトウェアとドライバー