検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

PLM-Series

ポリイミドストレインリリーフ付きポリイミドフレキシブルヒーター

在庫のあるモデル
  • 全てポリイミド製のストレインリリーフおよび絶縁
  • オプションの感圧接着剤付きモデル
  • 温度範囲 -57 °C(-71 °F)~232 °C(450 °F)
  • 非磁性加熱素子
PLM-Series
販売元 ¥ 13,601
在庫のあるモデル
ポリイミドストレインリリーフ付きポリイミドフレキシブルヒーター PLM-Series PLM-Series
loading all models
製品の概要
  • 曲げ半径、最小 0.032 in
  • 誘電強度 1250 Vac
  • ヒーター素材 ポリイミド
  • ヒーター厚みの注記 .01インチ、ストレインリリーフ最大は08インチ(ヒーターが3アンペア以上の場合は.10インチ)
  • リード長 12 in
  • リードの長さのノート PTFE絶縁、12インチ ±0.4インチ 長さ、UL10109、22 AWG(ヒーターが3アンペア以上の場合はUL1332、16 AWG)
  • シリーズID PLM-Series

Supported Applications

The Omega PLM-Series consists of polyimide flexible heaters designed for applications requiring conformability to rounded surfaces. The series is engineered with chemically resistant polyimide insulation and a non-magnetic heating element, allowing installation on curved geometries where rigid heating solutions are unsuitable.

Operating Conditions & Performance

The PLM-Series operates within distinct temperature envelopes depending on the adhesive configuration. Models without adhesive options support an operating range of -57 to 232°C (-71 to 450°F). Self-adhesive models are rated for a lower maximum, with an operating range of -40 to 149°C (-40 to 300°F).

Performance specifications include watt densities available at 2.5 W/in², 5 W/in², or 10 W/in². The heaters feature a minimum bending radius of 0.032" and maintain a maximum thickness of .01", with strain relief reaching up to .08" (or .10" for heaters ≥ 3 Amp). Electrical integrity is supported by a dielectric strength rating of 1250 VAC.

Configuration Options

The series offers configurable dimensions, power densities, and voltage ratings to accommodate specific installation needs. Key variant parameters include:

  • Voltage Ratings: Standard models support a maximum of 115 V or 230 V (PLM-*), while low-voltage variants are rated for 28 V max (PLMLV-*) and round versions up to 115 V max (PLMR-*).
  • Sizes: Rectangular models offer widths ranging from 0.5" to 4" and lengths from 1" to 12", with square configurations also available.
  • Adhesive Options: Models are offered in self-adhesive or non-adhesive versions; the adhesive option is denoted by a "-P" suffix in model numbers (e.g., PLMLV-0504/10-P).
  • Lead Wires: Standard leads consist of PTFE insulated wire, 12" ±0.4" length, UL10109, 22 AWG. For heaters ≥ 3 Amp, the lead specification is UL1332, 16 AWG.

Key Product Differences

The PLM-Series distinguishes between standard voltage and low-voltage families through model prefixes: "PLM" indicates standard configurations (up to 115 V or 230 V), while "PLMLV" designates the low-voltage family limited to 28 V max. A separate round version, identified by the prefix "PLMR," is available for circular heating requirements up to 115 V max.

Model numbers follow a structure of Series Prefix-Width/Length/Power Density-Adhesive Option. For example, PLMLV-204/10-P describes a Low Voltage Polyimide Heater with 28 V Max, 2 in Width, 4 in Length, 10 W/in² power density, and self-adhesive backing. Conversely, PLM-1012/2 represents a standard voltage heater (115 V Max) with 10 in width, 12 in length, 2.5 W/in² density, and no adhesive.

PLMPLMLVPLMR-05-1-2-3-4-5-6-7-8-9-10-11-12010203040506070809101112-05-1-2-3-4-5-6-7-8-9-10-11-12/2/5/10-P
⚠ 選択した幅では使用できません。
⚠ 選択した幅では使用できません。
⚠ 選択した幅では使用できません。
⚠ 選択した幅では使用できません。
⚠ 選択した幅では使用できません。
⚠ 選択した幅では利用できません。
⚠ 選択した幅では利用できません。
⚠ 選択した幅では利用できません。
⚠ 選択した幅では利用できません
⚠ 選択した幅では使用できません
⚠ 選択した幅では使用できません。
モデル
幅
長さ
直径
電力密度
接着剤オプション
"
ja-JP
ja_JP
設定を保存する