検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

DPDS-Series

空気圧パラレルグリッパー、ショートストローク、3ストローク長

공압 병렬 그리퍼, 쇼트 스트로크, 3가지 스트로크 길이
  • 3種類のストローク長が選べる空気式パラレルグリッパー
  • DIRECTCONNECT™によるモジュラーオートメーション、アダプタープレートなしでスライドおよびロータリーと接続可能
  • 上面および背面に複数の取り付け位置
  • 複数のエアポート位置が標準装備
DPDS-Series
販売元 ¥ 191,750
공압 병렬 그리퍼, 쇼트 스트로크, 3가지 스트로크 길이 DPDS-Series DPDS-Series
loading all models
製品の概要
  • 精度 ± 0.05 mm
  • 機械的寿命 500万サイクル
  • 取付 ボトム
  • 動作圧力(最大) 7 bar
  • 動作圧力(最小) 1.5 bar
  • 動作温度(最高) 80 °C
  • 動作温度(最低) -35 °C
  • 繰り返し精度 ±0.03 mm
  • シリーズID DPDS-Series

Supported Applications

The Omega DPDS Series consists of pneumatic dual motion grippers designed for material handling and automation tasks. These short-stroke parallel grippers feature a one-piece lightweight aircraft quality aluminum body and are engineered to be mounted and operated in any orientation. The series is intended for applications requiring precise positioning with an accuracy of ±0.05 mm (±0.002") and repeatability of ±0.03 mm (±0.001").

Operating Conditions & Performance

The DPDS Series operates within a pressure range of 1.5 to 7 bar (20 to 100 psi) and an ambient temperature range of -35 to 80°C (30 to 180°F). Proper operation requires a 4-way, 2-position valve and an air supply filter rated at 40 micron or better. In typical applications, the grippers are rated for up to 5 million cycles; with maintenance, this extends to up to 10 million cycles.

Loading capacities vary by model size (DPDS-047M through DPDS-125M) and mounting configuration. Static tensile loads range from 134 N (30 lb) for the DPDS-047M to 2,225 N (500 lb) for the DPDS-125M. Dynamic tensile capacities correspondingly range from 27 N (6 lb) to 289 N (65 lbs). Moment loads are specified separately for axes Mx, My, and Mz.

Model-Specific Loading Capacities

  • DPDS-047M: Static Tensile 134 N (30 lb); Dynamic Tensile 27 N (6 lb).
  • DPDS-056M: Static Tensile 267 N (60 lb); Dynamic Tensile 45 N (10 lb).
  • DPDS-088M: Static Tensile 614 N (138 lb); Dynamic Tensile 111 N (25 lb).
  • DPDS-125M: Static Tensile 2,225 N (500 lb); Dynamic Tensile 289 N (65 lbs).

Note: Capacities are per set of jaws and are not simultaneous. Do not exceed maximum effective finger lengths.

Bottom Jaw Mounting Option (-B)

  • DPDS-047M-B: Static Tensile 107 N (24 lb); Dynamic Tensile 22 N (5 lb).
  • DPDS-056M-B: Static Tensile 214 N (48 lb); Dynamic Tensile 36 N (8 lb).
  • DPDS-088M-B: Static Tensile 490 N (110 lb); Dynamic Tensile 89 N (20 lb).
  • DPDS-125M-B: Static Tensile 1,780 N (400 lb); Dynamic Tensile 231 N (52 lbs).

Configuration Options

The series is available in four sizes: DPDS-047M, DPDS-056M, DPDS-088M, and DPDS-125M. Each size supports multiple stroke lengths to accommodate different gripping requirements.

Stroke Lengths

  • DPDS-047M: 2.4 mm (0.09") or 3.2 mm (0.13").
  • DPDS-056M: 3.2 mm (0.13") or 4.8 mm (0.19").
  • DPDS-088M: 4.8 mm (0.19") or 6.4 mm (0.25").
  • DPDS-125M: 4.8 mm (0.19") or 6.4 mm (0.25").

Sensors and Accessories

The grippers feature full range adjustable magneto resistive sensors. Available sensor options include PNP and NPN types with quick disconnects, offered in various configurations such as OHSP-011 (90°) or OHSN-017.

  • Sensors: PNP and NPN magneto resistive sensors.
  • Cables: Quick disconnect cables available in 2 m (6.6') or 5 m (16') lengths.
  • Maintenance Kits: Manifold O-ring seal kits SLKT-197V for models 047M/056M and SLKT-199V for models 088M/125M.
  • Safety Options: Fail safe valve OFSV-004 available for models 088M and 125M only.

Grip Force by Model

  • DPDS-047M: 62 N (14 lb).
  • DPDS-056M: 98 N (22 lb).
  • DPDS-088M: 222 N (50 lb).
  • DPDS-125M: 445 N (100 lb).

Weighing and Dimensions

Gripper weights range from 0.04 kg (0.086 lb) for the DPDS-047M to 0.46 kg (1.03 lb) for the DPDS-125M.

Key Product Differences

The primary distinction within the series is the model size, which dictates grip force, loading capacity, and weight. The "B" suffix in a model number indicates the bottom jaw mounting option, which alters static and dynamic load ratings compared to standard top/back mounting.

Model Number Structure

The ordering format follows the pattern: DPDS-M--B-V. For example, DPDS-056M-019-B-V represents a size 056M gripper with a 4.8 mm (0.19") stroke and bottom jaw mounting.

Mounting Configurations

The series offers multiple mounting locations on the top and back, as well as air port locations to facilitate flexible installation in various orientations. The "-B" variant specifically provides a bottom jaw mounting configuration with reduced moment capacities compared to standard configurations.

ja-JP
ja_JP
設定を保存する