検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-PCHP

圧力/真空校正用空気式手動ポンプ - 漏れ防止設計

Series-PCHP
販売元 ¥ 48,967
圧力/真空校正用空気式手動ポンプ - 漏れ防止設計 Series-PCHP Series-PCHP
loading all models
製品の概要
  • ゲージポートサイズ 1/8インチ
  • ゲージタイプ NPT オス、BSPP オス
  • 材料 ステンレス鋼の継手、陽極酸化アルミニウム、プラスチック、ゴム、ニトリル
  • 対応媒体 HVAC / 室内空気
  • 出力圧力範囲 -28 Hg ~ 600 psi
  • 圧力、最大 600 psi
  • 圧力タイプ ゲージ
  • プロセス接続サイズ 1/4インチ
  • シリーズID Series-PCHP
  • 重量 2 lb

Supported Applications

The Dwyer Series PCHP Pneumatic Calibration Hand Pump sources pressure and vacuum to check the calibration of gages, switches, transmitters, and recorders. Designed for leak-free operation, the pump utilizes dual o-rings on all pistons to ensure zero leakage throughout its output range.

Operating Conditions & Performance

The Series PCHP operates with air and compatible gases only; it is not intended for liquids or other media. The device covers an output range of -28" Hg to 600 psi (-0.945 to 40 bar). Key performance constraints include a maximum pump design pressure of 600 psig, with warnings that connection to a pressure source greater than this limit could cause serious injury.

Construction materials for the wetted path consist of stainless steel fittings and nitrile o-rings. The housing is anodized aluminum, complemented by plastic/rubber handles featuring contoured cushions to prevent sliding during operation.

Configuration Options

The series offers specific configurations including a standard pump model and options for hose kits. Connection interfaces are provided via 1/4" NPT/BSP process connections and 1/8" NPT/BSP gauge connections. For users requiring BSP ports, the documentation notes that an adapter is required to connect NPT fittings.

  • Process Connection: 1/4" NPT/BSP
  • Gauge Connection: 1/8" NPT/BSP
  • Housing Material: Anodized aluminum with plastic/rubber handles
  • Wetted Materials: Stainless steel fittings and nitrile o-rings
  • Weight: 2 lbs (0.91 kg)

The pump incorporates a Schrader valve rather than a needle valve, requiring several turns from the end of travel to achieve full open or closed positions.

Key Product Differences

Dwyer documents two primary model configurations within the Series PCHP:

  • PCHP-1: Pneumatic calibration hand pump (standard configuration).
  • PCHP-1K: Pneumatic calibration hand pump with hose kit.

An accessory, the PCHP-HK High pressure hose, is available separately. The series includes a note that NPT to BSP Parallel Thread Adapters are required for connecting NPT fittings when using 1/8" and 1/4" BSP ports; these adapters feature a bonded washer attached to the male end.

アクセサリー

accessories

PCHP-1手動ポンプ用高圧ホース。
¥48,967 / 各
0 在庫あり

consumables

Repair kit.
¥74,873 / 各
0 在庫あり
ja-JP
ja_JP
設定を保存する