検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

MDS8PT

PLATINUM™シリーズ ユニバーサルベンチトップデジタルパネルメーター

  • ULおよびcUL認証取得
  • ユニバーサル入力
  • 使いやすく設定が簡単
  • 高品質&高精度
MDS8PT
販売元 ¥ 146,126
PLATINUM™シリーズ ユニバーサルベンチトップデジタルパネルメーター MDS8PT MDS8PT
loading all models
製品の概要
  • Decimal Selection Note None, 0.1 for temperature; none, 0.1, 0.01 or 0.001 for process
  • A/D変換 24ビットシグマデルタ
  • 精度 ± 0.03 % FS
  • 追加機能 1 プログラム可能な3色ディスプレイ
  • CMRR 120 dB
  • コンフィグレーション 差動
  • 制御出力 2 SPDTリレー
  • デシマル選択 0,001, 0,01, 0,1, なし
  • デジタルフィルター プログラム可能
  • 表示サイズ 21 mm (0.82 インチ)
  • 表示タイプ 注 4桁または6桁、9セグメントLED、21 mm(0.83インチ)、プロセス変数、設定値、温度単位用のプログラム可能なグリーン、アンバー、レッドの各色
  • フォームファクター ベンチトップ
  • 周波数 50/60 Hz
  • 入力電流 4~20 mA、0~24 mA
  • 入力タイプ 熱電対、RTD、サーミスタ、電流、電圧
  • 入力電圧 -100~100 mV、-1~1 V、-10~10 Vdc
  • 測定タイプ 温度、電流、電圧、差動電圧
  • 測定範囲(最小) プロセス電圧: +100 mV, ±1, +10 Vdc; プロセス電流: 0~24 mAの範囲でスケーラブル;;熱電対:;タイプJ: -210~760°C; タイプK: -270~-160°Cおよび-160~1372°C; タイプT: -270~-190°Cおよび-190~400°C; タイプE: -270~-220°Cおよび-220~1000°C; タイプR: -50~40°Cおよび40~1768°C; タイプS: -50~100°Cおよび100~1768°C; タイプB: 100~640°Cおよび640~1820°C; タイプC: 0~2320°C; タイプN: -250~-100°Cおよび-100~1300°C; タイプL: -200~900°C;;RTD:;Pt, 0.00385, 100, 500, 1000 Ω: -200~900°C; Pt, 0.00392, 100, 500, 1000 Ω: -200~850°C;;サーミスタ:;2252 Ω: -40~120°C; 5K Ω: -30~140°C; 10K Ω: -20~150°C
  • 入力数 1
  • 出力詳細 オプションアラーム1および2(プログラム可能) タイプ:Form “C” SPDTリレー 動作:高/低、上/下、30 Vrmsまでの制限出力、最大60 Vdc、バンド、ラッチ/アンラッチ、常時開/常時閉およびプロセス/偏差;フロントパネル設定 オプションアナログ出力(プログラム可能): 絶縁型、再送信0~10 Vdcまたは0~20 mA、最大500 Ω(出力1のみ)。 精度は以下の条件を満たす場合、FSの±1%。 1) 入力が入力FSの1%未満にスケーリングされていないこと 2) アナログ出力が出力FSの3%未満にスケーリングされていないこと
  • 極性 バイポーラ
  • 抵抗値の分解能 温度 :1° /0.1° ; プロセス : 10 µV
  • RTD入力範囲 100/500/1000 Ω Ptセンサー、2線式、3線式または4線式;0.00385または0.00392曲線
  • シリーズID MDS8PT
  • セットポイント調整 メニュー設定可能
  • スパン調整 0.001 ~ 9999 カウント
  • ステップ応答 99.9%に対して0.7秒
  • 電源タイプ AC
  • 供給電圧 90から240 Vac
  • 温度安定性 RTD: 0.04°C/°C ;TC@ 25°C(77°F):0.05°C/°C ;コールドジャンクション補償プロセス:50 ppm/°C
  • 熱効果 -9999 から +9999
  • 熱抵抗値 2252 Ω、5KのΩ、10K Ω
  • 熱電対タイプ J、K、T、E、N、R、S、B、C、L

Supported Applications

The MDS8PT PLATINUM™ Series is a universal-input benchtop digital panel meter built for laboratory and portable temperature or process measurement. A single universal input accepts thermocouple, RTD, thermistor, or voltage/current signals, and the meter is factory configured and calibrated for use straight out of the box. Housed in a benchtop plastic enclosure based on a 1/8 DIN (96 x 48 mm) panel meter, it brings PLATINUM Series capability to the bench.

The signature Pt Series color-changing LED display can be programmed to switch between GREEN, AMBER, and RED at any set-point or alarm point, giving an immediate visual cue of process status. With dual alarm relays, isolated analog output, and serial or Ethernet communications (including Modbus®), the meter suits process monitoring and control, test benches, calibration labs, and general temperature and process indication.

Each meter ships with a power cord and user's guide. For safety, do not exceed the voltage rating, always disconnect power before changing signal or power connections, and do not operate in flammable or explosive environments.

Operating Conditions & Performance

The universal input covers a broad set of sensor types and signal ranges:

  • Thermocouple: Types J, K, T, E, R, S, B, N, C, and U
  • RTD: Pt100, Pt1000, Ni120, Ni1000
  • Thermistor: 10kΩ, 20kΩ, 50kΩ, 100kΩ
  • Voltage: ranges including 0-10 VDC down to millivolt spans
  • Current: 4-20 mA, 0-20 mA, 0-10 mA

Measurement accuracy is ±0.05% of reading ±1 digit with a resolution of 0.1 °C or 0.1 °F and a 1 second response time. The meter runs on 100-240 VAC, 50/60 Hz, operates from 0 °C to 50 °C, and stores from -20 °C to 60 °C at 0% to 90% RH, non-condensing. The enclosure carries an IP50 rating.

An isolated analog output can be configured for 0-20 mA, 4-20 mA, or 0-10 VDC, driving up to 500 Ω max on output 1. The benchtop unit measures 192 mm (W) x 100 mm (H) x 120 mm (D), weighs 0.8 kg, and reads out on a 7-segment LED display. It is CE and UKCA marked and UL US listed.

Configuration Options

The four models differ in two ways: display digit count and the communication/output options fitted. The MDS8PT models use a 4-digit LED display, while the MDS8EPT models use a 6-digit display for finer numeric readout. Both share the same universal input and color-changing display.

The option suffixes build up the meter's connectivity, following the PLATINUM feature codes:

  • -330: Dual Alarm Relays
  • -C24: Isolated RS232 and RS485
  • -EIP: Ethernet
  • -A: Isolated Analog Output

A base -330 model provides dual alarm relays only, while a fully optioned -330-C24-EIP-A model adds isolated RS232/485 serial communication, embedded Ethernet, and an isolated analog output — turning the same benchtop meter into a fully networked instrument.

Key Product Differences

The series comprises four ordering configurations, pairing a 4-digit or 6-digit display with either the base relay package or the full communications-and-output package:

  • MDS8PT-330 — 1-channel 4-digit benchtop panel meter, universal input with dual alarm relays
  • MDS8EPT-330 — 1-channel 6-digit benchtop panel meter, universal inputs with dual alarm relays
  • MDS8PT-330-C24-EIP-A — 4-digit meter with dual alarm relays, RS232/485 communication, embedded Ethernet, and isolated analog output
  • MDS8EPT-330-C24-EIP-A — 6-digit meter with dual alarm relays, RS232/485 communication, embedded Ethernet, and isolated analog output

A power cord is required for operation and selected to suit the destination: POWER CORD-MOLDED (North America, 120 Vac), POWER CORD-DM (Denmark), POWER CORD-E-10A (Continental Europe), POWER CORD-IT (Italy or Ireland), POWER CORD-UK (United Kingdom), or POWER CORD-SE with stripped ends for all countries.

ja-JP
ja_JP
設定を保存する