日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
RD8250-Series
設定可能なユニバーサル入力付きペーパーレスレコーダー
- DC電圧および電流、熱電対、RTD、周波数、回転パルス用の2つの設定可能な絶縁入力
- 4つの内部アラーム設定点
- 2つのアラームリレー出力
- 1つのデジタル制御入力
製品の概要
- 精度 ± 0.1 %
- 精度の詳細 電圧:0.1%、電流:0.1%、熱電対:0.3%、RTD:0.3%、速度入力(rpm)、周波数:±1 Hz、rpm:9999 rpm未満で±1 rpm、9999 rpm以上で±10 rpm
- 承認 CE
- 表示に関する注意事項 LCDグラフィックス、160 x 80ピクセル、黒色FSTN、白色LEDバックライト付き、ユーザー制御のバックライトレベルおよびコントラスト調整(電子式) ユーザーインターフェース:5ボタンキーパッド(デュアルファンクションボタン) 表示モード:トレンディング(水平)、大型二重デジタル表示、混合モード。
- 表示分解能 160 x 80 ピクセル
- 表示タイプ LCD
- 電気出力 5 Vdc @ 50 mA
- 筐体の定格に関する注意事項 屋内使用のみ、IEC 664に準拠した設置カテゴリーII;IEC61010-1に準拠した汚染度レベルII
- 周波数測定範囲 0から600,000 rpmまで
- 高さ 96 mm
- インピーダンス入力 >100 kΩ
- 入力電流 0~20 mA、4~20 mA、0~50 mA
- 入力タイプ 熱電対、RTD、電圧、電流、周波数、RPMパルス
- 入力電圧 0~250 mVdc、0~1.25 Vdc、0~2.5 Vdc、0~5 Vdc、0~12.5 Vdc、0~25 Vdc
- 絶縁 300 Vac/Vdc チャネル入力からシャーシ接地へ
- 長さ 152 mm
- 測定タイプ ユニバーサル
- メモリ 2 GB、コンパクトフラッシュ
- 取付 1/4 DIN パネルマウント
- 入力数 2
- リレーの数 2
- 動作温度(最高) 50 °C
- 動作温度(最低) -10 °C
- 光絶縁入力 5Cから12 Vdc 活性化 @ 10 mA
- 出力詳細 2出力、5 Vdc @ 50 mA、外部センサーへの電源供給用
- プログラム可能な機能 ピーク, スケールとオフセット
- パルス入力ノート 10 ms
- 相対湿度 80% RH
- 相対湿度の注意 31 °C(88 °F)までの温度で80%、40 °Cで50%に直線的に減少
- 抵抗値の分解能 電圧:0.025%、電流:0.025%、RTD:0.1°C
- RTD タイプ 100 Ω Pt センサー、α= 0.00385 または 0.00392
- サンプリングレート 100 Hz (100 更新/秒)
- シリーズID RD8250-Series
- 音声出力 内蔵ビーパー(複数トーン)
- スイッチ出力 30 V @ 0.5 A
- スイッチタイプ A形リレー
- 温度測定範囲 J:-100°Cから760°C、K:-100°Cから1000°C、T:-100°Cから400°C、E:-80°Cから400°C、RTD:-100°Cから750°C
- 熱電対タイプ J、K、T、E
- 幅 96 mm
Supported Applications
The Omega RD8250 Series is a paperless recorder designed for industrial process monitoring. It functions as a solid-state data recorder and panel indicator, replacing traditional paper recorders by storing historic data on CompactFlash™ memory cards to eliminate issues with jamming, ink smudging, or pen clogging. The instrument supports real-time trend viewing and digital readouts for applications requiring the measurement of voltage, current, thermocouples, RTDs, frequency, and speed inputs.
Operating Conditions & Performance
The RD8250 Series operates within an ambient temperature range of -10 to 50°C (14 to 122°F). Relative humidity is rated at 80% for temperatures up to 31°C (88°F), decreasing linearly to 50% @ 40°C (104°F). The device is specified for indoor use only, meeting Installation Category II per IEC 664 and Pollution Degree Level II per IEC61010-1.
Performance specifications vary by input type:
- DC Voltage Accuracy: 0.1% of reading
- DC Current Accuracy: 0.1% of reading (excluding 250 Ω external shunt)
- Thermocouple Accuracy: 0.3% FS (typical) for types J, K, T, and E
- RTD Accuracy: 0.3% FS (typical) for 100 Ω Pt 385 and 100 Ω Pt 392 sensors
- Frequency Input Range: 0 to 10,000 Hz or 0 to 600,000 rpm with ±1 Hz accuracy for frequency and ±1 rpm below 9999 rpm (±10 rpm above) for speed
- Ambient Temperature Sensor Accuracy: ±1.5°C (2.7°F)
Data storage capacity reaches up to 2 Gigabytes on CompactFlash™ cards, with a measurement rate of up to 100 samples/s per channel.
Configuration Options
The series offers configurable inputs and outputs tailored for specific process needs. Key capabilities include:
- Inputs: Two universal, user-selectable isolated channels supporting DC Voltage (0 to 25V ranges), DC Current (0/4 to 20 mA or 0 to 50 mA), Thermocouples (J, K, T, E), RTDs (100 Ω Pt 385/Pt 392), Frequency, and Speed.
- Outputs: Two alarm relay outputs rated at 30 V and 0.5 A form 'A' relays; one opto-isolated digital control input activated by 5 to 12 Vdc @ 10 mA typical.
- Data Storage & Display: LCD graphics display (160 x 80 pixels) with user-controlled backlight and contrast. Data is stored on CompactFlash™ cards ranging from 512 MB to 2 GB.
- Power Options: Models support external AC power via a universal adaptor or isolated DC input, with an optional internal battery pack for uninterrupted operation during blackouts.
Key Product Differences
The RD8250 Series is differentiated by model number and available options:
- RD8252: Paperless recorder with 2 inputs, powered by an external AC wall transformer (100 to 240 Vac, 50/60 Hz) providing 9 ±0.5 Vdc @ 5 VA.
- RD8253: Paperless recorder with 2 inputs, designed for isolated DC power supply of 12 to 24 Vdc (not compatible with the internal battery pack option).
Available order suffixes and accessories include:
- -UPS: Rechargeable battery pack providing up to 8 hours typical operation during power loss for RD8252 units.
- -USB: Front-panel USB 2.0 slave port for data transfer and remote real-time display using Navigator software.
- -EI: Ethernet communications port supporting real-time data, historic transfer, remote control, configuration via web server, and built-in web interface.
- NEMA 4X (IP66) Enclosure Kit: Optional enclosure for enhanced environmental protection.
PDFとマニュアル
ソフトウェアとドライバー
RD82523-EI-UPS-USB