検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-SBLT2

水中レベルトランスミッター - 圧電抵抗式、316ステンレス鋼ハウジング

  • ダイヤフラムを保護する弾丸型ノーズデザインのスリム設計でアプリケーション要件を満たす
  • デュアルアレスタ技術を利用した雷およびサージ保護により寿命を延長、ケースに接地し、電源サージおよび雷の接地トランジェントを除去(サージ保護は保証対象外)— SBLT2モデル
  • メンテナンス不要のフィルターで微粒子や水滴のトランスデューサーへの侵入を防止
  • 適切なバリアと組み合わせた場合、危険場所での使用を想定したUL認定の本質安全防爆仕様 — SBLTXモデル
  • 耐久性のある270ポンド引張強度のシールドおよびベントケーブルと優れた耐薬品性により所有コストを削減
  • NPT接続により配管/配線管に堅牢に設置可能、またはA-625吊りループを使ってチェーンを取り付けて設置から取り外し可能な柔軟な設置オプション
  • 標準72時間のリードタイムで最小限のダウンタイム
Series-SBLT2
販売元 ¥ 99,095
水中レベルトランスミッター - 圧電抵抗式、316ステンレス鋼ハウジング Series-SBLT2 Series-SBLT2
loading all models
製品の概要
  • 応用例 HVAC, 水質モニタリング
  • 補償温度、最小 0 °F
  • 電気接続 ピグテールリード
  • 電気出力 0~20 mA
  • ループ抵抗 900 Ω、最大30 Vdc
  • 取付 測定レベル以下のタンク内に懸濁
  • 出力詳細 4~20 mA DC、2線式
  • 出力信号 電流
  • 保護 雷およびサージ保護
  • 工場メディアレビューが必要 true
  • 応答時間 50 ms
  • シリーズID Series-SBLT2
  • 電源タイプ DC
  • 熱効果 ± 0.02% FS/°F

Supported Applications

The Series SBLT2 Submersible Level Transmitters measure liquid height above a reference point in a tank relative to atmospheric pressure. The series is designed for applications including air economizers, groundwater monitoring, environmental remediation, and water tanks.

  • Air economizers
  • Groundwater monitoring
  • Environmental remediation
  • Water tanks

Operating Conditions & Performance

The transmitters utilize a piezoresistive sensing element encased in a 316 SS housing. Accuracy is specified as ±0.25% FS, with configured ranges below 5 psi (11.54 ft w.c.) [3.52 m w.c.] listed at ±1% FS accuracy. The pressure limit is rated at 2X FS.

  • Temperature Limit: SBLT2 Polyurethane cable operates from 0 to 150°F (-18 to 66°C); ETFE cable from 0 to 200°F (-18 to 93°C). The SBLTX variant supports -4 to 176°F (-20 to 80°C) for ETFE and -4 to 149°F (-20 to 65°C) for Polyurethane.
  • Compensated Temperature Range: SBLT2 is compensated from 0 to 140°F (-18 to 60°C); SBLTX is compensated from 0 to 176°F (-18 to 80°C).
  • Thermal Effect: Less than ±0.02% FS/°F.
  • Response Time: 50 ms.

Measurement Ranges

The series supports measurement ranges in psi (up to a maximum of 5000 psi) and feet (up to a maximum of 1500 feet). Specific configured ranges include:

  • 5 psi (11.54 ft w.c.) [3.52 m w.c.]
  • 10 psi (23.09 ft w.c.) [7.04 m w.c.]
  • 15 psi (34.63 ft w.c.) [10.56 m w.c.]
  • 20 psi (46.18 ft w.c.) [14.08 m w.c.]

Configuration Options

The Series SBLT2 and SBLTX offer configurable options for cable type, length, process connections, and hazardous location approvals.

Cable Options

  • Polyurethane (standard)
  • ETFE (-ETFE option code)

Process Connections & Mounting

  • Standard: 1/2 NPT process connection.
  • Optional connections include P1 (1/4" NPT male), P2 (1/4" NPT female), P3 (1/4" BSPT male ISO 228 R), P4 (1/4" BSPT female ISO 228 RC), and P11 (3/4" clean-out type).
  • Mounting orientation: Suspended in tank below level being measured.

Hazardous Location Approvals

The SBLTX variant is UL listed for use in Hazardous (Classified) Locations with Intrinsic Safety, "ia" protection. It holds ATEX and IECEx certifications:

  • UL: Class I Div. 1 Groups A,B,C,D; Class II Div. 1 Groups E,F,G; Class III Div. 1.
  • ATEX: EU Type Certificate NO. DEMKO 18 ATEX 2080 (II 1 G Ex ia IIC T4 Ga and II 1 D Ex ia IIIC T135C Da).
  • IECEx: Certificate of Conformity IECEx UL 18.0086.

Electrical Specifications

  • Output Signal: 4-20 mA DC, 2-wire.
  • Power Requirement: SBLT2 requires 10-30 VDC; SBLTX requires 10-28 VDC.
  • Max. Loop Resistance: 900 Ω at 30 VDC (SBLT2); 900 Ω (SBLTX).

Key Product Differences

The series comprises two primary model families with distinct performance envelopes and approvals:

  • Series SBLT2: Features lightning and surge protection utilizing dual arrestor technology. Power requirement is 10-30 VDC.
  • Series SBLTX: Designed for hazardous locations (Intrinsic Safety "ia"). Does not include the standard lightning/surge protection found in the non-hazardous model; power requirement is limited to 10-28 VDC. The SBLTX transducer is not field repairable.

Both series share a bullet nose design that protects the diaphragm from damage and include a ventilation tube in the cable to automatically compensate for changes in atmospheric pressure above the tank. Wetted materials consist of 316 SS/316L SS body, PVC bullet nose, Polyether polyurethane or ETFE cable, and Fluoroelastomer seals.

アクセサリー

accessories

Desiccant filter for vent tube
¥6,469 / 各
0 在庫あり
危険場所用本質安全ゼナーバリア
¥112,922 / 各
0 在庫あり

installation hardware

316 SS cable hanger use with NPT option for attaching chain for easy pulling out of application.
¥7,687 / 各
0 在庫あり
SBLT2-カスタムM-カスタムM-ETFE-P1-P2-P3-P4-P11
センサーレンジ
センサーユニット
ケーブル長
ケーブル単位
ケーブル材質
オプション
"
ja-JP
ja_JP
設定を保存する