日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-PBLT2
廃水・スラリー用潜水型レベルトランスミッター、316ステンレススチール
- フローティング固体に対して詰まりにくく損傷に強い大口径316ステンレス鋼ダイヤフラムシールを備えた耐久性の高いケージ設計でアプリケーション要件を満たす
- デュアルアレスタ技術を利用した雷およびサージ保護により寿命を延長、ケースに接地され、電源サージおよび雷の接地トランジェントを除去(サージ保護は保証対象外)— PBLT2モデル
- メンテナンス不要のフィルターを使用し、粒子や水滴がトランスデューサに入るのを防止
- 適切なバリアと併用することで危険場所での使用に対応したUL認定の本質安全防爆仕様— PBLTXモデル
- 耐久性が高く、引張強度270ポンドのシールドおよびベント付きケーブルと優れた耐薬品性により所有コストを削減
- NPT接続により配管やコンジットに堅牢に取り付け可能、またはA-625吊りループを使用してチェーンを取り付けて設置から取り外し可能な柔軟な設置オプション
Series-PBLT2
From
¥
167,649
Product Overview
- 精度の詳細 ±0.25% FS(直線性、ヒステリシス、繰り返し性を含む)
- 応用例 化学精製所, 化学物質, 石油
- 補償温度、最小 0 °F
- 電気接続 ピグテールリード
- 電気出力 0~20 mA
- ループ抵抗 900 Ω
- 取付 測定レベル以下のタンク内に懸濁
- 出力詳細 4~20 mA DC、2線式
- 出力信号 電流
- 耐圧力 2倍フルスケール
- 保護 雷およびサージ保護
- 工場メディアレビューが必要 true
- 応答時間 50 ms
- シリーズID Series-PBLT2
- 電源タイプ DC
- 熱効果 ± 0.02% FS/°F
Supported Applications
The Dwyer Series PBLT2 and PBLTX Submersible Level Transmitters are designed for measuring liquid level in harsh environments. The series is specifically suited for wastewater, slurry applications, oil tanks, chemical storage, and sludge pits where a durable cage design with a large-diameter 316 SS diaphragm seal prevents clogging from floating solids.
Operating Conditions & Performance
The transmitters utilize a piezoresistive sensing element to measure the height of liquid referenced to atmospheric pressure. Accuracy is specified as ±0.25% FS (includes linearity, hysteresis, and repeatability) for configured ranges at or above 5 psi; ranges below this threshold are noted with ±1% FS accuracy. The series supports measurement up to a maximum of 5000 psi or 1500 feet.
Performance is maintained across specific temperature envelopes depending on the model and cable type:
- PBLT2 Process Temperature: 0 to 200°F (-18 to 93°C)
- PBLTX with ETFE Cable: -4 to 176°F (-20 to 80°C)
- PBLTX with Polyurethane Cable: -4 to 149°F (-20 to 65°C)
The response time is documented as 50 msec. The pressure limit for the series is rated at 2X FS.
Ventilation and Protection Features
- Atmospheric Compensation: A ventilation tube within the shielded, vented cable automatically compensates for changes in atmospheric pressure above the tank. The vent includes a filter to block dust, dirt, and water droplets.
- Surge Protection (PBLT2): Features dual arrestor technology grounded to the case to eliminate power supply surges and lightning ground strike transients. Note: Surge protection is not guaranteed and is not covered by warranty.
- Cable Strength: Equipped with a 270-pound tensile strength cable.
Configuration Options
The series offers configurable options for measurement range, cable length, and hazardous location compliance. The model number guide follows the format: PBLT2 - - - .
Measurement Ranges & Cable Lengths
- Ranges: Available in psi (up to 5000 psi maximum) and feet (up to 1500 feet maximum). Specific standard ranges include 5, 10, 15, 20 psi and metric equivalents such as 3.5M, 5M, 10M.
- Cable Lengths: Configured lengths are available from 10 to 2000 ft (3 to 610 m). Standard options include 40, 60, 70, 80, and 100 feet.
Cable Types & Materials
- ETFE: Default cable type (indicated by blank in ordering).
- Polyurethane (-PU): Available as an option code.
- Wetted Materials: Body: 316 SS, 316L SS; Cable: Polyether polyurethane or ETFE; Seals: Fluoroelastomer.
Hazardous Location Approvals (PBLTX)
The PBLTX variant is intrinsically safe and carries the following certifications:
- cULus Intrinsically Safe: Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III, Div. 1.
- ATEX: EU Type Certificate NO. DEMKO 18 ATEX 2080 (II 1 G Ex ia IIC T4 Ga and II 1 D Ex ia IIIC T135C Da).
- IECEx & UKCA Ex: Certified under EN/IEC 60079-0 and 60079-11 standards.
The PBLT2 model holds CE and UKCA approvals but does not include intrinsic safety certification in the standard configuration. Use of associated apparatus for hazardous locations requires adherence to Control Drawing 001833-44 or 001833-47.
Power & Output
- PBLT2 Power: 13-30 VDC; Loop Resistance: 900 Ω at 30 VDC (datasheet) or 850 Ω at 30 VDC (manual).
- PBLTX Power: 10-28 VDC.
- Output Signal: 4-20 mA DC, two wire for both models.
Key Product Differences
The Series PBLT2 and PBLTX differ primarily in their electrical protection features and hazardous location certifications. The PBLT2 includes built-in lightning and surge protection utilizing dual arrestor technology, whereas the PBLTX is designed for intrinsically safe applications with specific entity parameters (Ui ≤ 28VDC, Ii ≤ 93mA) but lacks the dedicated surge protection circuitry of the standard model.
Temperature limits also vary by cable construction. The ETFE-equipped units support a higher ambient temperature range (-4 to 176°F / -20 to 80°C) compared to Polyurethane-equipped units (-4 to 149°F / -20 to 65°C). Additionally, the PBLTX is not field repairable and must be returned for service if needed.
Accessories available include a Dessicant filter (A-297) for vent tube humidity protection, a 316 SS cable hanger (A-625), an intrinsically safe galvanic isolator (MTL5041), and an intrinsically safe zener barrier (MTL7706).
PBLT2-CUSTOMM-カスタムM-PU-2YR-LSP