日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-MSX-Magnesense
MSX Magnesense® 差圧トランスミッター、32レンジ、デュアル出力
- 180°回転可能なディスプレイでLCDの値を読みやすく
- オプションの工具不要端子台で迅速かつ簡単な配線
- UL94 V-0およびプラナム評価でさまざまな用途に安全性を追加
製品の概要
- 精度の詳細 ± 1% FSO
- 応用例 建設と維持管理, HVAC
- 破裂圧力 最大 6 psi
- 電気接続 1/2インチ NPSメスコンジット、ネジ式端子台付き
- 電気出力 4~20 mA、0~5 Vdc、0~10 Vdc
- エンクロージャーの定格 IP66, NEMA タイプ 4X, UL94 V-0, UL 2043 (プレナム)
- 長期安定性 ± 1% FSO/年
- ループ抵抗 現在の出力:0~1250 Ω 最大、電圧出力:負荷抵抗 1 kΩ 最小。
- 材料建設オプション 該当なし
- 材料、湿潤 メーカーにお問い合わせください
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
- 取り付けに関する注意事項 位置感応ではない
- ワイヤ本数 2, 3
- 動作温度(最高) 70 °C
- 動作温度(最低) -20 °C
- 出力詳細 フィールド選択可能
- 出力信号 電流、電圧
- 消費電力 最大21 mA
- 圧力タイプ 差分
- プロセス接続サイズ 1/8インチ、3/16インチ、1/4インチ
- プロセス接続タイプ 段付きバーブ継手
- 応答時間 3秒
- 応答時間の注記 瞬時(デフォルト)または3秒(選択可能)
- シリーズID Series-MSX-Magnesense
- スパン調整 プッシュボタン
- 電源タイプ AC / DC
- 供給電圧 2線式:10から36Vdc、3線式:17から36Vdc/21.6から33Vvc
- 重量 230 g
- 線径 26から16 AWGまで
- ゼロ点設定調整範囲 デジタルプッシュボタン
Supported Applications
The Dwyer Series MSX Magnesense® Differential Pressure Transmitter monitors differential pressure in building control applications. Documented uses include filter monitoring in air handler units, building pressure management in clean rooms, duct static pressure measurement, and air velocity or flow calculation in VAV systems.
- Filter monitoring
- Clean room building pressure
- Duct static pressure
- Air velocity/flow in VAV systems
Operating Conditions & Performance
The Series MSX measures differential pressure for air and non-combustible, compatible gases. The transmitter operates within an ambient temperature range of -4 to 158°F (-20 to 70°C). Accuracy is specified as ±1% FSO with stability rated at ±1% FSO/year.
Pressure limits vary by selected range: Ranges 0 and 1 support a maximum operating pressure of 3.6 psi with a burst rating of 6 psi; Ranges 2, 3, and 4 support a maximum operating pressure of 6 psi with a burst rating of 6 psi. The response time is instantaneous by default or selectable up to 3 s (configurable up to 30 s when equipped with an LCD). Power consumption is DC: 0.5 W or AC: 0.5 VA.
Configuration Options
Housing and Mounting Options
- Wall mount (-W)
- Universal wall/duct mount (-U, -Y for square housing)
- DIN rail mount (-N, -Z for square housing)
- Square Housing Wall mount (-S)
Process and Electrical Connections
The transmitter accepts process connections via 1/8", 3/16", 1/4", 5 mm, or 6 mm ID flexible tubing. The electrical entry is a 1/2" NPS thread with a 4-position removable terminal block for 16 to 26 AWG wire (optional toolless terminal block available).
Output Signals and Communication
- Analog: 4-20 mA (2-wire), 0-10 V or 0-5 V selectable (3-wire)
- Dual Output: Simultaneous Current and Voltage output supported
- Communication Protocols: BACnet MS/TP, Modbus® RTU via TIA/EIA-485
Sensor Ranges and Modes
The series offers 32 configurable pressure ranges available in unidirectional or bidirectional modes. Pressure units include inches of water column (in w.c.), Pascals (Pa), and millimeters of water column (mm w.c.). The transmitter calculates linear pressure, velocity, or flow using square root extraction.
Approvals and Ratings
- NEMA 4X (IP66)
- UL 2043 (Plenum)
- UL94 V-0
- BTL Listed, CE Marked
Key Product Differences
The Series MSX is distinguished by its mounting configuration and output capabilities. Models are available with a standard round housing or an optional square housing for specific DIN rail applications. The Universal model (-U) can function as a wall-mount transmitter; before mounting, the included plug must be inserted into the duct probe port.
Communication-enabled models (option code -COM) support BACnet MS/TP and Modbus® RTU protocols with configurable baud rates from 9600 to 115200. Models equipped with an optional LCD display feature a rotatable 180° screen for easier reading; the display must be removed before wiring.
Wetted materials are not specified in the documentation and require consultation with the factory. The transmitter is not field serviceable, and repair requires return to the manufacturer.
アクセサリー
consumables
installation hardware
meters/controllers
MSX-WUNSYZ1201234-INPAMM-LCD-A481-COM-FC-FP-GLD-NIST-STX-TT




