日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-FBLT
フラッシュチップ式水中レベルトランスミッター、ピエゾ抵抗式、316ステンレス鋼
- 過酷な用途に対応する目詰まりしないフラッシュダイヤフラムチップによる長寿命運転
- メンテナンス不要のフィルターで粒子や水滴のトランスデューサーへの侵入を防止
- 優れた耐薬品性を持つポリエーテルポリウレタンまたはETFEケーブル材質の選択で過酷な環境に適合
- 二重アレスタ技術を利用した雷およびサージ保護により寿命を延長し、ケース接地で電源サージおよび雷の接地トランジェントを除去(サージ保護は保証対象外)
- 狭小設置に対応する細身設計で、FBLTがスタリングウェルや狭い設置場所に適合
- PTFEコーティングされた耐スティック性表面の堅牢なFKMフルオロエラストマーダイヤフラムで攻撃的な流体にも耐える
- ゲル充填されたダイヤフラムキャビティにより、通常油やグリースによって引き起こされる製品漏れを回避
- NPT接続によりパイプ/導管にしっかり取り付けるか、A-625吊りループを使用してチェーンで取り外し可能な柔軟な設置オプション
製品の概要
- 応用例 石油
- 補償温度、最小 32 °F
- 電気接続 ピグテールリード
- 電気出力 0~20 mA
- ループ抵抗 1000 Ω @ 最大30 Vdc
- 取付 監視対象点の下に懸垂
- 出力詳細 4~20 mA DC、2線式
- 出力信号 電流
- 耐圧力 2倍フルスケール
- 保護 EN61000-4-5準拠、クラス5のサージ/雷保護
- 工場メディアレビューが必要 true
- 応答時間 <50 ms
- シリーズID Series-FBLT
- 電源タイプ DC
- 熱効果 ± 0.0075%/°F
Supported Applications
The Dwyer Series FBLT Flush Tip Submersible Level Transmitters are designed for continuous level measurement in harsh applications, including sewage lift stations. The narrow body design allows installation into stilling wells and confined spaces where standard transmitters may not fit.
- Sewage lift stations
- Sludge and slurries
- Tanks and pits requiring reference to atmospheric pressure
Operating Conditions & Performance
The Series FBLT utilizes a piezoresistive sensing element with a flush diaphragm tip. The transmitter measures the height of liquid above its mounting position, referencing atmospheric pressure via a ventilation tube in the cable protected by a maintenance-free filter.
- Accuracy: ±0.25% FS (absolute); ranges 4.3 to 4.9 psi (10 to 11.54 in. w.c.) are ±0.30% FS
- Operating Temperature Ambient: 32 to 140°F (0 to 60°C)
- Operating Temperature Process: -4 to 176°F (-20 to 80°C)
- Response Time: < 50 ms
- Pressure Rating: 2x range
- Power Supply: 10-33 VDC
- Load Resistance: 1000 Ω @ 30 VDC
Configuration Options
The series offers configurable options for construction, output, reference type, cable material, range units, and length. The body is constructed of 316 SS with a PTFE coated FKM fluoroelastomer diaphragm designed to resist sticking in aggressive fluids.
- Output Signal: 4-20 mA DC 2-wire
- Cable Materials: Polyether polyurethane or ETFE (for corrosive applications)
- Range Units: Feet of water column, meters of water column, psi
- Mounting Options: Suspended below point being monitored; optional 1/2" NPT connection for rigid installation in pipe/conduit
Accessories and Special Features
- A-297 Desiccant Filter: Attaches to the vent tube to remove humidity; changes color to indicate saturation.
- A-625 Hanging Loop: 316 SS cable hanger used with the NPT option for attaching a chain to pull the unit out of installation.
- Protection Features: Surge and lightning protection per EN61000-4-5, Class 5; gel-filled diaphragm cavity (non-leaking).
Key Product Differences
Variants differ by range value, cable length, and material selection. The model number guide follows the format: FBLT - <Construction> - <Circuit Options> - <Body Material> - <Accuracy> - <Output> - <Reference> - <Cable Material> - <Range Unit> - <Range Value> - <Cable Length> - <Options>. For example, FBLT-2SC-IVPF-30-50-NIST indicates a flush tip construction with surge protection (circuit option 2), 316 SS body, ±0.25% accuracy, 4 to 20 mA output, vented reference, polyurethane cable, and NIST traceable certificate.
- Cable Lengths: Available in various lengths; specific variants include 40', 50', and 60' options depending on the model configuration.
- Range Values: Documented ranges include 8.66 psi (20" w.c.), 10 psi, 12.99 psi (30" w.c.), 15 psi, and up to 20 psi (196.85 in. w.c.).
FBLT-2SC-IVEPFMP-カスタム-カスタム-FC-NIST-NPT


