日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-DM
空気・ガス用差圧トランスミッター、4-20 mA出力
- ゼロおよびスパンコントロールによる設置時間の短縮で迅速かつ簡単な校正を実現
- プッシュボタン式のゼロおよびスパンコントロールで迅速かつ簡単なセットアップと校正
- 見やすいLCDディスプレイによるローカルアラートで即時の是正措置が可能
- Magnehelic®ゲージと同じ直径の切り欠きを使用しているため、アップグレード設置コストを削減し、現場でのアップグレードを簡素化
製品の概要
- 精度の詳細 すべてのレンジで±1% FSO、ただし0.25 in w.c.では±2% FSO、±0.1 in w.c.以下のレンジでは±4% FSO
- 応用例 フィルター監視, HVAC
- 破裂圧力 最大 6 psi
- ダイヤルの深さ 48 mm
- ダイヤル外径 127 mm
- 表示タイプ LCD
- 電気接続 ネジ端子
- エンクロージャーの定格 IP66, NEMA タイプ 4X
- 長期安定性 < ± 1%FSO/年
- 材料 ポリカーボネート
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
- 取り付けに関する注意事項 位置感応ではない
- ワイヤ本数 2
- 動作温度(最高) 70 °C
- 動作温度(最低) -20 °C
- 圧力タイプ 差分
- プロセス接続サイズ 1/8インチ、3/16インチ、1/4インチ
- プロセス接続タイプ 段付きバーブ継手
- シリーズID Series-DM
- スパン調整 プッシュボタン
- 熱効果 0.036% FS/°C
- 重量 200 g
- ゼロ点設定調整範囲 プッシュボタン
Supported Applications
The Dwyer Series DM DigiMag® Differential Pressure Transmitter is designed to sense the pressure of air and non-combustible, compatible gases. The transmitter provides a standard 4-20 mA output signal for integration into control systems monitoring differential pressure conditions.
Operating Conditions & Performance
The Series DM operates within an ambient temperature range of -4 to 158°F (-20 to 70°C). Accuracy is specified as ±1% FSO for most ranges, with specific exceptions: the 0.25 in w.c. range offers ±2% FSO accuracy, and ranges at or below ±0.1 in w.c. offer ±4% FSO accuracy. Stability is rated at < ±1%/year FSO.
Pressure limits vary by measurement range:
- Ranges > 1 in w.c.: 6 psi max operation, 6 psi burst
- Ranges ≤ 1 in w.c.: 3.6 psi max operation, 6 psi burst
The unit features a thermal effect of 0.036% FS/°C (0.02% FS/°F). Response time is configurable via buttons for Fast (0 seconds) or dampened (4 seconds) response.
Configuration Options
The series offers a wide range of factory-calibrated models covering differential pressure ranges from 0.1 in w.c. to ±1250 Pa, including specific options for mm w.c. and negative-to-positive spans such as -0.05-0.20 in w.c.
Key configurable features include:
- Housing & Mounting: Polycarbonate molded housing with integral pressure connections, designed to mount in the same 5" OD (127 mm) cutout as a standard Magnehelic® gage. The unit is not sensitive to mounting orientation.
- Process Connections: Male ports on the side accommodate flexible tubing sizes of 1/8", 3/16", 1/4", 5 mm, and 6 mm ID.
- Electrical Interface: Screw-type terminals for a 2-wire system powered by 10-35 VDC. Maximum loop resistance is 0 to 1250 Ω max., with current consumption up to 21 mA max.
- Calibration & Display: Digital push-button zero and span adjustments replace turn-potentiometers. A single push-button allows field selection of 4 to 6 engineering units depending on the range.
The enclosure is rated NEMA 4X (IP66). Wetted materials should be confirmed by consulting the factory.
Key Product Differences
Different models within the Series DM are distinguished primarily by their calibrated pressure ranges. Model numbers follow a specific code structure where suffixes indicate options:
- -FC: Factory calibration certificate
- -LG: Light grey overlay
- -NIST: NIST traceable calibration certificate
- -SS: 304 brushed SS bezel
The series includes models for positive-only ranges (e.g., DM-001 at 0.1 in w.c.) and bidirectional ranges (e.g., DM-202 at ±0.25 in w.c.). The unit carries CE approval.
アクセサリー
accessories
3-way vent valve, plastic, 1/8" NPT to 1/4" metal tubing, 80 psi rating, replaces former Model A-310 (brass). 2.3" x .8" x .1", .10 lb.
¥5,053 / 各
0 在庫あり
installation hardware
ブラケット内に埋め込み取り付けされたMagnehelic®ゲージ。ブラケットは表面取り付け式。スチール製、グレーのハンマートーンエポキシ仕上げ。サイズ:6.3" x 7.7" x 4.0"、重量:1.30ポンド。
¥8,845 / 各
0 在庫あり
Flat aluminum bracket for flush mounting Magnehelic® gage. 6.8" x 6.0" x .1", .35 lb.
¥7,796 / 各
0 在庫あり
DM-001002003004005007008019201202203052053056057059252253256259082282-COO-FC-LG-NIST-SS

