検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-629C

湿式差圧トランスミッター、デュアルセンサー、精度0.5%、NEMA 4X

  • 直流または交流のいずれかで駆動可能 - 最も入手しやすい電源を利用でき、設置コストを削減
  • オプションのLCDは別途電源を必要としない - 設置コストを低減
  • 選択可能な電圧範囲 - プロセス/HVACコントローラの設計変更や入力変更に柔軟に対応
  • プッシュボタンゼロ調整(トリムポットではなく) - より簡単なゼロ調整で設置と校正が容易、設置時間と操作ミスの可能性を低減
  • オプションのLCDインジケーターは動作状況をローカルで表示
  • リモートセンサーオプションにより設置作業と材料を削減
Series-629C
販売元 ¥ 164,184
湿式差圧トランスミッター、デュアルセンサー、精度0.5%、NEMA 4X Series-629C Series-629C
loading all models
製品の概要
  • 精度 ± 0.5 %
  • 精度の詳細 ±0.5% FS(直線性、ヒステリシスおよび再現性を含む)
  • 応用例 フィルター監視, 流体計測と制御, 石油, ポンプ制御, 冷蔵, 冷蔵設備
  • 補償温度、最大 79 °C
  • 補償温度、最小 -18 °C
  • 表示タイプ 該当なし
  • 電気接続 1/2インチ NPT メスコンジット(ネジ付き端子台付き)
  • エンクロージャーの定格 IP66, NEMA タイプ 4X
  • 長期安定性 ± 1% FS/年
  • 対応媒体 燃料ガス, HVAC / 室内空気, 不活性/非反応性ガス, 蒸気
  • 取り付けに関する注意事項 位置感応ではない
  • 動作温度(最高) 93 °C
  • 動作温度(最低) -18 °C
  • 消費電力 最大28 mA
  • 圧力タイプ 差分
  • プロセス接続サイズ 1/4インチ
  • 応答時間 400 ms
  • シリーズID Series-629C
  • スパン調整 プッシュボタン
  • 熱効果 0.072%/ °C
  • 熱効果に関する注記 平均 0.04%/°F (0.072%/°C)(ゼロ点およびスパンを含む)。
  • ゼロ点設定調整範囲 導管エンクロージャ内のプッシュボタン

Supported Applications

The Dwyer Series 629C Wet/Wet Differential Pressure Transmitter monitors differential pressure of compatible gases and liquids. The series is designed for applications involving flow elements, coils, heat exchangers, chillers, filters, and pumps.

Operating Conditions & Performance

The Series 629C employs dual pressure sensors to convert pressure changes into an output signal with ±0.5% FS accuracy (includes linearity, hysteresis, and repeatability). The transmitter operates within a process temperature range of 0 to 200°F (-18 to 93°C) and features a response time of 400 msec. Stability is rated at ±1% FS/yr with an average thermal effect of 0.04%/°F (0.072%/°C). The enclosure meets NEMA 4X (IP66) weatherproof construction standards.

Measurement ranges span from low differential pressures to high bar values, including:

  • Psi differential: 0 to 5 psid through 0 to 500 psid
  • Bar differential: 0 to 0.5 bar through 0 to 30 bar

Working and over-pressure limits vary by range number; for example, the 01 range (0 to 5 psid) lists a working pressure of 10 psi and an over-pressure limit of 50 psi. Pressures exceeding the working pressure limit may cause a calibration shift of up to ±3% of full scale.

Configuration Options

The series supports multiple configuration options for housing, process connections, electrical interfaces, signal outputs, and accessories.

Housing & Mounting

  • Conduit Housing: Standard NEMA 4X (IP66) conduit housing (-CH).
  • Remote Sensor Options: Available with remote sensors and shielded or armored cables in lengths of 10' (-R1), 20' (-R2, -R5), or specific armored configurations (-R6). The NEMA 4X rating is maintained on the housing for non-LCD models; LCD indication options maintain NEMA 4X on sensors and housing.

Process Connections & Wetted Materials

  • Connections: 1/4" male or female NPT, and 1/4" male or female BSPT.
  • Materials (Without Valve): 316, 316L SS.
  • Materials (With Valve Option): Buna-N, silicone grease, PTFE, brass 360, copper, and reinforced copolymer.

Electrical & Signal Outputs

  • Power Supply: 2-wire: 10-35 VDC; 3-wire: 13-35 VDC or isolated 16-33 VAC (reverse polarity protected).
  • Signal Output: 4-20 mA (S1) or field selectable voltage outputs of 0-5, 1-5, 0-10, or 2-10 VDC (S3).
  • Load Resistance: Current output: 0 to 1250 Ω max; Voltage output: Minimum load resistance = 5 kΩ.

Options & Accessories

  • Valves: Optional 3-way valve (-3V) for zeroing without removing the transmitter. Note: The -3V option is only available with the -P2 process connection, and over-pressure of all models with a 3-way valve is limited to 100 psi.
  • Display: Optional field-upgradeable LCD indication (4-1/2 digit).
  • Certification & Identification: Factory calibration certificate, NIST traceable certificate, and aluminum tag options are available.

Key Product Differences

The Series 629C model number structure follows the format: Series - Range - Housing - Process Connection - Electrical Connection - Signal Output - Options. Key distinctions include:

  • Housing Codes: Differentiate between standard conduit housings and remote sensor configurations with varying cable lengths (10', 20') and shielding types.
  • Process Connections: Selection of male/female NPT or BSPT threads determines compatibility with the optional 3-way valve, which is restricted to female NPT (-P2).
  • Signal Output Codes: S1 designates a fixed 4-20 mA output, while S3 provides field-selectable voltage ranges.

アクセサリー

accessories

Stainless steel flex hose, 12" (30.48 cm) long, 1/8" male NPT connections.
¥10,619 / 各
0 在庫あり

installation hardware

1/2インチオスNPT継手付きケーブルグランド
¥4,551 / 各
0 在庫あり
3-Way manifold and bracket for pressure transmitters.
¥35,145 / 各
0 在庫あり
¥49,501 / 各
0 在庫あり
629C-01-02-03-04-05-06-07-08-09-11-12-13-14-15-16-17-18-19-CHR1R2R5R6-P1P2P3P4-E1E2E3E5E9-S1S3-AT-FC-LCD-NIST-3V
レンジ
ハウジング
フィッティング
電気接続
電気出力
オプション
"
ja-JP
ja_JP
設定を保存する