検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-616W

差圧トランスミッター、±0.25%精度、NEMA 4X、4-20 mA出力

  • NEMA 4X 定格エンクロージャは、屋外監視や塵埃や微粒子が存在する環境での保護を提供します
  • 読みやすいLCDディスプレイは即時のローカルアラートを提供し、問題の拡大を防ぐための迅速な是正措置を可能にします
  • ゼロおよびスパン調整により、簡単な校正チェックと短い設置時間でデバイスの稼働と監視が可能です
Series-616W
販売元 ¥ 114,742
差圧トランスミッター、±0.25%精度、NEMA 4X、4-20 mA出力 Series-616W Series-616W
loading all models
製品の概要
  • 精度の詳細 ± 0.25% FS @ 77°F (25°C)、表示精度 ± 0.5%
  • 電気接続 ネジ端子
  • エンクロージャーの定格 IP66, NEMA タイプ 4X
  • 長期安定性 ± 1% FS/年
  • 材料、湿潤 メーカーにお問い合わせください
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
  • 取り付けに関する注意事項 位置感応ではない
  • 動作温度(最高) 70 °C
  • 動作温度(最低) -20 °C
  • 圧力タイプ 差分
  • プロセス接続に関する注記 バーブ付き、1/8˝および3/16˝(3.12および4.76 mm)内径のゴムまたはビニールチューブに対応する二重サイズ
  • プロセス接続サイズ 1/8インチ、3/16インチ
  • プロセス接続タイプ 段付きバーブ継手
  • シリーズID Series-616W
  • スパン調整 プッシュボタン
  • 電源タイプ AC / DC
  • 線径 26から16 AWGまで
  • ゼロ点設定調整範囲 プッシュボタン

Supported Applications

The Dwyer Series 616W Differential Pressure Transmitter is designed to sense the pressure of air and non-combustible, compatible gases. The series measures positive, negative, and differential pressures within factory-calibrated ranges. Documented applications include dust collection systems, outdoor HVAC environments, and roof-top equipment.

Operating Conditions & Performance

The Series 616W operates in ambient temperatures from -4 to 158°F (-20 to 70°C). The unit is housed in a polycarbonate enclosure rated NEMA 4X (IP66) and can be mounted in any orientation. Performance specifications include:

  • Accuracy: ±0.25% FS @ 77°F (25°C); display accuracy of ±0.5%
  • Stability: ±1% FS/yr
  • Thermal Effect: ±0.02% FS/°F (±0.036% FS/°C)
  • Response Time: Instantaneous (default) or 3 s (selectable via DIP switch)

The transmitter supports measurement ranges from 0 to 1 in w.c. up to 0 to 25 kPa, including bidirectional spans such as 3-0-3 in w.c., 5-0-5 in w.c., and 10-0-10 in w.c. Maximum pressure limits vary by model range; for example, the 0 to 6 in w.c. range lists a maximum of 4.5 psig, while the 0 to 200 in w.c. range supports up to 45 psig.

Power and Electrical Specifications

The series offers flexible power configurations depending on output type:

  • Current Output (2-wire): 10-36 VDC; Loop resistance 0 to 1250 Ω max.
  • Voltage Output (3-wire): 17-36 VDC or isolated 21.6-33 VAC; Minimum load resistance 1 kΩ.
  • Current Consumption: 21 mA max continuous.

Electrical connections utilize a 4-wire removable European style terminal block for 16 to 26 AWG wire. Process connections feature barbed fittings compatible with 1/8" and 3/16" (3.12 and 4.76 mm) I.D. rubber or vinyl tubing.

Configuration Options

The Series 616W is available in multiple configurations to address specific installation needs:

  • Output Signals: Selectable 4-20 mA (2-wire), 0-5 VDC (3-wire), or 0-10 VDC (3-wire).
  • Display Options: Models with an LCD display provide local pressure indication and error messages; non-LCD models rely on remote signal monitoring.
  • Ranges: Available in inch water column (in w.c.) and kilopascal (kPa) units. Metric ranges are identified by model numbers containing "M".
  • Bidirectional Ranges: Specific models support negative-to-positive spans, such as 3-0-3 in w.c., 5-0-5 in w.c., and 10-0-10 in w.c.

The series includes zero and span adjustments via digital push-buttons for calibration checks. These controls are not intended for re-ranging to significantly different spans. An optional NIST traceable calibration certificate is available by adding the "-NIST" suffix to the model number.

Key Product Differences

Variants within the Series 616W differ primarily by measurement range, output signal type, and display presence. Models are designated with a numeric code corresponding to their specific pressure span (e.g., "-2" for 0 to 6 in w.c.). The addition of "LCD" indicates models equipped with a digital readout.

Models ending in "B" denote bidirectional ranges, while those containing "M" indicate metric units. For example:

  • 616W-2-LCD: 0 to 6 in w.c., with LCD display
  • 616W-6B-LCD: 3-0-3 in w.c. bidirectional range, with LCD display
  • 616W-2M-LCD: 0 to 1.5 kPa metric range, with LCD display

The unit is not field serviceable; repair requires return to the factory. Wetted materials should be confirmed by consulting the manufacturer.

アクセサリー

エアフィルター用圧力計・ゲージ向け静圧センサー
発送元 ¥1,190
0 在庫あり
616W-2345676B10B20B2M3M4M5M-LCD-AT-COC-FC-NIST
レンジ
ディスプレイ
オプション
"
ja-JP
ja_JP
設定を保存する