検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-2000-Magnehelic

低差圧計 – 電源不要、IP67

  • 歪みのないプラスチックフェイスを通して読みやすいゲージで、遠くからの視認が可能
  • 特許取得済みの設計により圧力変化に迅速に反応し、重要な状況の評価に遅延がない
  • 耐久性と堅牢なハウジングおよび高品質な部品の組み合わせにより、長寿命とダウンタイムの最小化を実現
  • 高精度オプションは標準のMagnehelic®ゲージの2倍の精度を持つ
  • ベゼルはパネルへのフラッシュマウント用のフランジを提供
  • 透明プラスチックフェイスは破損に非常に強く、指針と目盛りを歪みなく表示
  • 精密リトグラフ印刷の目盛りは正確で読みやすい
  • 熱処理アルミニウムチューブ製の赤先端指針は視認性が高く、ヘリックス軸にしっかりと固定されている
  • 成形ゴム製の指針ストッパーが指針の過度な動きを防止し、損傷を防ぐ
  • 「ウィッシュボーン」アセンブリがヘリックス、ヘリックスベアリング、および指針軸の取り付けを提供
  • 宝石軸受は耐衝撃性があり、ヘリックスのほぼ摩擦のない動きを実現。高粘度シリコーン流体で動きを減衰
  • ゼロ調整ねじはプラスチックカバー内に便利に配置されており、カバーを外さずにアクセス可能。Oリングシールにより圧力密封を確保
  • ヘリックスは高磁気透過率合金で精密に製造され、宝石軸受に取り付けられ自由に回転し、磁場に従って指針を目盛り上で動かす
  • 校正範囲スプリングは平バネ鋼製。小振幅の動きにより一貫性と長寿命を保証。ダイヤフラムの圧力に反応し、校正用に有効長を調整可能
  • シリコーンゴム製ダイヤフラムは一体成形のOリングで支持され、前後のプレートで保持。シールプレートと保持リングで固定・密封。過圧による損傷防止のためダイヤフラムの動きを制限
  • ダイキャストアルミニウムケースは精密製造され、168時間の塩水噴霧腐食試験に耐えるイリダイト処理済み。外装は焼付けダークグレーハンマーロイド仕上げ。すべての標準圧力オプションおよび表面・フラッシュマウントに同一ケースサイズを使用
  • 過圧保護:ブローアウトプラグは背面のゴムプラグで構成され、約25 psig(1.7 bar)の過圧で座が外れてゲージ内部をベントするリリーフバルブとして機能。圧力解放のため、ゲージ表面取り付け時に0.023インチのクリアランスを保つ4つのスペーサーパッドがあり、この隙間を塞がないこと。180インチ水圧以上のモデル、中圧・高圧モデル、またはダイヤフラムにシリコーン以外のエラストマーを必要とするゲージにはブローアウトプラグは使用されない。ブローアウトプラグはシステムの過圧制御用として使用すべきでなく、高圧供給によりゲージが過圧で故障し、財産損害や重大な怪我を引き起こす可能性がある。適切なエンジニアリングプラクティスを用いて、システムがいかなる部品の定格を超えないようにすることが重要
  • カバーのOリングシールがケースの圧力密封性を保証
  • 範囲スプリングの一端に取り付けられたサマリウムコバルト磁石が機械的連結なしにヘリックスを回転させる
Series-2000-Magnehelic
販売元 ¥ 15,858
低差圧計 – 電源不要、IP67 Series-2000-Magnehelic Series-2000-Magnehelic
loading all models
製品の概要
  • 精度の詳細 FSの±2%(-HAモデルは±1)、-0、-100PA、-125PA、-10MMレンジでは±3%(-HAは±1.5%)、-00、-60PA、-6MMレンジでは±4%(-HAは±2%)、70°F(21.1°C)での全レンジにわたる。
  • ダイヤル直径 4インチ
  • エンクロージャーの定格 IP67
  • 材料 アルミニウム、アクリル
  • 材料、湿潤 メーカーにお問い合わせください
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
  • 取付方向 垂直ダイアフラム
  • 圧力限界 -20 inHg to 15 psig
  • 圧力タイプ 差分
  • プロセス接続に関する注記 1/8˝ メスNPT複製高圧および低圧タップ - 片側に1対、背面に1対。
  • プロセス接続サイズ 1/8インチ
  • プロセス接続タイプ NPT メス
  • 安全機能 リリーフプラグは約25 psig(1.72 bar)で開きます。標準ゲージのみ。
  • シリーズID Series-2000-Magnehelic
  • 重量 510 g

Supported Applications

The Dwyer Series 2000 Magnehelic Differential Pressure Gages indicate positive, negative (vacuum), or differential pressure of air and non-combustible, compatible gases. The series is designed for filter monitoring, blower vacuum monitoring, fan pressure indication, duct/room/building pressures, and clean room positive pressure indication. Models with dual-scale dials are available to measure air velocity when used with a pitot tube.

Service compatibility includes natural gas (option available) and hydrogen applications requiring a Buna-N diaphragm at pressures less than 35 psi. The gages utilize Dwyer's frictionless Magnehelic movement, featuring a samarium cobalt magnet and helix without mechanical linkages to resist shock and vibration.

Operating Conditions & Performance

The series operates within an ambient temperature range of 20 to 140°F (-6.67 to 60°C). A low-temperature option extends the lower limit to -20°F (-28°C). The enclosure is rated IP67, and the exterior finish withstands a 168-hour salt spray corrosion test.

Accuracy specifications vary by range:

  • ±2% of full scale (FS) throughout the range at 70°F (21.1°C).
  • ±3% on -0, -100PA, -125PA, and -10MM ranges.
  • ±4% on -00, -60PA, and -6MM ranges.

The High Accuracy (-HA) option improves performance to ±1% of FS (±1.5% on specific low ranges; ±2% on others). Standard gages feature a relief plug that opens at approximately 25 psig (1.7 bar); this protection is not used on models above 180" water pressure, medium/high-pressure options, or non-silicone diaphragm configurations.

Pressure Limits

The series supports the following total pressure limits:

  • Standard: -20 in Hg to 15 psig (-0.677 bar to 1.034 bar).
  • -MP (Medium Pressure) option: 35 psig (2.41 bar) on one or both sides of the diaphragm.
  • -HP (High Pressure) option: 80 psig (5.52 bar) on one or both sides of the diaphragm.

Measurement Ranges

The series offers extensive range options including:

  • Inches of water: .05-0-.2 to 0-250 (models 2000-00N through 2250); zero center ranges from 0.125-0-0.125 to 15-0-15.
  • PSI: 0-1 to 0-30 (models 2201 to 2230).
  • Metric units: MM of water, CM of water, kPa, and Pa ranges available in both positive/negative and zero-center configurations.

Configuration Options

The Series 2000 is configurable across multiple dimensions to meet specific installation needs. The standard housing consists of a die-cast aluminum case and bezel with an acrylic cover; the diaphragm is silicone rubber with an integrally molded O-ring.

Mounting & Housing Options

Gages are available for surface or flush mounting (4-9/16" dia. panel opening required). Mounting accessories include:

  • A-286 Panel mounting flange and A-300 Flush mounting bracket.
  • A-371 Surface mounting bracket for -MP/-HP models only.
  • A-464 / A-464-SS Flush mount kits (stainless steel available).
  • A-610 Pipe Mounting Kit for 1½" – 2" pipe installation.

Bezel & Display Options

The bezel is standard die-cast aluminum. Available finishes include:

  • -SS: Corrosion resistant brushed 304 stainless steel.
  • -CB: Chrome plated aluminum.
  • -SB: 304 stainless steel electro polished Ra 16 finished.

Scale overlays are available in Green (-G), Red (-R), or Yellow (-Y) transparent finishes. A mirrored scale overlay (-M) is included with the -HA High Accuracy option to reduce parallax error.

Functional Options & Accessories

  • -SP: LED set point indicator (12-24 VDC), includes medium pressure bezel for 4-13/16" flush mounting hole.
  • -ASF: Adjustable signal flag integral with the plastic gage cover (not available on MP/HP construction).
  • Air Filter Kits: A-605, A-605B, and A-605C include static pressure tips, tubing, vent valves, and mounting hardware.
  • Portable Kit: A-432 combines a carrying case with rubber tubing and stand-hang bracket.

Key Product Differences

The series distinguishes between standard pressure models and specialized configurations. Standard gages utilize an acrylic cover, while the -MP option uses clear molded polycarbonate and the -HP option uses clear cast acrylic machined to finish dimensions.

Dual-scale models provide simultaneous readings in English/Metric units (e.g., 0-.25 in w.c. / 0-62 Pa) or air velocity scales for use with pitot tubes (F.P.M.). The -HA High Accuracy variant includes a six-point calibration certificate and mirrored scale overlay.

Process connections are standard as 1/8" female NPT duplicate high and low pressure taps, arranged in one pair on the side and one pair on the back. For applications with high cycle rates within the total pressure rating, selecting the next higher pressure option (MP or HP) is recommended.

アクセサリー

accessories

3-way vent valve, plastic, 1/8" NPT to 1/4" metal tubing, 80 psi rating, replaces former Model A-310 (brass). 2.3" x .8" x .1", .10 lb.
¥5,053 / 各
0 在庫あり
Plastic carrying case (7-9/16" x 5-7/8" x 2-13/16").
¥7,577 / 各
0 在庫あり
Plastic carrying case for Magnehelic® gage of standard range, except high pressure connection, includes 9 ft (2.7m) of 3/16" ID rubber tubing, stand-hang bracket & terminal tube with holder. 9.1" x 7.4" x 3.6", 1.30 .lb
¥13,618 / 各
0 在庫あり
Air filter kit - adapts any standard Magnehelic® gage for use as an air filter gage. Includes aluminum surface mounting bracket with screws, (2) 5 ft (1.5 m) lengths of 1/4" aluminum tubing, (2) static pressure tips & (2) molded plastic vent valves.
¥10,597 / 各
0 在庫あり
Air filter kit with (2) plastic open/close valves, (2) 4 in steel static tips, tubing and mounting flange
¥8,328 / 各
0 在庫あり
Air filter kit with (2) plastic open/close valves, (2) plastic static tips, tubing and mounting flange
¥6,531 / 各
0 在庫あり

consumables

Silicone rubber gasket for panel mounting (Series 2000, DM-2000, DM-1000, 605)
¥1,180 / 各
0 在庫あり

installation hardware

Mounting hardware kit for standard Magnehelics® (not MP or HP). Included in the kit: 2 each: A-339 adapters, A-330 pipe adapters; 3 each: mounting lugs, long screws, short screws)
¥2,337 / 各
0 在庫あり
ブラケット内に埋め込み取り付けされたMagnehelic®ゲージ。ブラケットは表面取り付け式。スチール製、グレーのハンマートーンエポキシ仕上げ。サイズ:6.3" x 7.7" x 4.0"、重量:1.30ポンド。
¥8,845 / 各
0 在庫あり
Flat aluminum bracket for flush mounting Magnehelic® gage. 6.8" x 6.0" x .1", .35 lb.
¥7,796 / 各
0 在庫あり
Magnehelic® ゲージ用アルミ製表面取り付けプレート。
¥2,246 / 各
0 在庫あり
Stand-hang bracket, aluminum, for Magnehelic® gage.
¥3,511 / 各
0 在庫あり
Surface mounting bracket, use with Photohelic® switch/gage on horizontal or vertical surfaces, also for Capsu-Photohelic® switch/gage on vertical only. Also Magnehelic® -MP, -HP models.
¥11,088 / 各
0 在庫あり
Flush mount kit for Magnehelic® gages (Magnehelic® sold separately)
¥5,984 / 各
0 在庫あり
Stainless steel flush mounting kit for the Magnehelic® gages (Magnehelic® sold separately)
¥27,979 / 各
0 在庫あり
PIPE MOUNTING KIT FOR MAGNEHELIC AND CAPSUHELIC GAGES
¥7,796 / 各
0 在庫あり
2000-00N2000-002000-0200120022003200420052006200820102012201520202025203020402050206020802100212021502160218022502300-002300-02301230223042310232023302000-00D2000-0D2001D2002D2003D2004D2005D2006D2008D2010D2015D2020D2025D2050D2060D2000-00AV2000-0AV2001AV2002AV2005AV2010AV2201220222032204220522102215222022302000-6MM2000-10MM2000-15MM2000-25MM2000-30MM2000-50MM2000-80MM2000-100MM2000-125MM2000-150MM2000-200MM2000-250MM2000-300MM2300-6MM2300-10MM2300-20MM2000-15CM2000-20CM2000-25CM2000-50CM2000-80CM2000-100CM2000-150CM2000-200CM2000-250CM2000-300CM2300-4CM2300-10CM2300-30CM2000-60NPA2000-30PA2000-60PA2000-100PA2000-125PA2000-250PA2000-300PA2000-500PA2000-750PA2000-1000PA2300-60PA2300-100PA2300-120PA2300-200PA2300-250PA2300-300PA2300-500PA2300-1000PA2000-0.5KPA2000-1KPA2000-1.5KPA2000-2KPA2000-2.5KPA2000-3KPA"" 2000-4KPA2000-5KPA2000-8KPA2000-10KPA
ja-JP
ja_JP
設定を保存する